Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 1
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

Strip backfilling mining technology is of great significance for eliminating coal gangue, improving coal recovery rate, harmonizing the development between resources and environment in diggings. This paper firstly analyzed the roof control mechanism, the deformation and failure mechanism and characteristics of the filling body through theoretical analysis. Then, through numerical simulation combined with the geological conditions on site, a gangue strip filling scheme was designed for the 61303 working face of the 13th layer of the rear group coal of the Wennan Coal Mine in Shandong Province, and the filling scheme of filling 50 m and leaving 25 m was determined. Finally, an on-site engineering test was carried out on the 61303 working face. Through the analysis of the measured data of “three quantities” after the filling test, it can be seen that the test has achieved a good engineering application effect and verified the rationality of the filling scheme design. It solves the coal gangue problem, improves the resource recovery rate, and provides a reference for other similar mines.
Go to article

Bibliography

[1] E.H. Bai, W.B. Guo, Y. Tan, et al., Green coordination mining technology of “retaining and filling road filling method”. Journal of China Coal Society 43 (S1), 21-27 (2018).
[2] D .A. Landriault, R.E. Brown, D.B. Counter, Paste backfill study for deep mining at kidd creek. CIM Bulletin 93 (1036), 156-161 (2000).
[3] J.L. Xu, Q. You, W.B. Zhu, et al., Theoretical study on mining subsidence by strip filling. Journal of China Coal Society 02, 119-122 (2007).
[4] J. Palarski, The experimental and practical results of appling backfill. Innovations in Montreal, 33-37 (1989).
[5] J.L. Xu, W.B. Zhu, X.S. Li, et al., Study on partial filling mining technology for controlling coal mining subsidence. Journal of Mining and Safety Engineering (01), 6-11 (2006).
[6] Y .L. Tan, X.S. Liu, J.G. Ning, et al., In situ investigations on failure evolution of overlying strata induced by mining multiple coal seams [J]. Geotechnical Testing Journal 40 (2), 244-257 (2017).
[7] Y .C. Yin, T.B. Zhao, Y.B. Zhang, et al., An Innovative Method for Placement of Gangue Backfilling Material in Steep Underground Coal Mines [J]. Minerals 9, 107 (2019).
[8] G .C. Zhang, S.J. Liang, Y.L. Tan, et al., Numerical modeling for longwall pillar design: A case study from a typical longwall panel in China [J]. Journal of Geophysics and Engineering 15 (1), 121-134 (2018).
[9] J. Trckova, J. Sperl, Reduction of surface subsidence risk by fly ash exploitation as filling material in deep mining areas. Natural Hazards 53 (2), 251-258 (2010).
[10] J.R. Liu, W.P. Huang, Z.P. Guo, et al., Pumping cemented coal gangue strip filling system in goaf and its application. Coal Technology 35 (12), 16-18 (2016).
[11] W.Y. Guo, Y.L. Tan, F.H. Yu, et al., Mechanical behavior of rock-coal-rock specimens with different coal thicknesses [J]. Geomechanics and Engineering 15 (4), 1017-1027 (2018).
[12] X.S. Liu, Y.L. Tan, J.G. Ning, et al., Mechanical properties and damage constitutive model of coal in coal-rock combined body [J]. International Journal of Rock Mechanics and Mining Sciences 110, 140-150 (2018).
[13] K. Zhong, Research on filling mining technology and parameters of Fuyang Coal Mine. Xi’an University of Science and Technology (2018).
[14] W.P. Huang, C. Li, L.W. Zhang, et al., In situ identification of water-permeable fractured zone in overlying composite strata [J]. International Journal of Rock Mechanics and Mining Sciences 105, 85-97 (2018).
[15] Y .L. Tan, Q.H. Gu, J.G. Ning, et al., Uniaxial compression behavior of cement mortar and its damage-constitutive model based on energy theory [J]. Materials 12, 1309 (2019). DOI: https://doi.org/10.3390/ma12081309
[16] J. Wang, J.G. Ning, J.Q. Jiang, et al., Structural characteristics of strata overlying of a fully mechanized longwall face: a case study [J], Journal of the Southern African Institute of Mining and Metallurgy 118, 1195-1204 (2018).
[17] Q. Yao, Study on segmental filling of fully mechanized mining in steeply inclined coal seam and its rock stratum control. Hunan University of Science and Technology, (2017).
[18] W.P. Huang, Q. Yuan, Y.L. Tan, et al., An innovative support technology employing a concrete-filled steel tubular structure for a 1000-m-deep roadway in a high in situ stress field [J]. Tunnelling and Underground Space Technology 73, 26-36 (2018).
[19] J.G. Ning, J. Wang, J.Q. Jiang, et al., Estimation of crack initiation and propagation thresholds of confined brittle coal specimens based on energy dissipation theory [J]. Rock Mechanics and Rock Engineering 51, 119-134 (2018).
[20] J.W. Bai, R.T. Liu, Y.J. Jiang, et al., The deformation of surrounding rock and the regulation law of confined water in strip filling and displacement mining. Journal of Mining and Safety Engineering 35 (02), 35-42 (2018).
[21] X.K. Sun, W. Wang, Theoretical study on high-water materials filling and replacement mining pressure-bearing water strip coal pillars. Journal of China Coal Society 36 (06), 909-913 (2011).
[22] T.B. Zhao, W.Y. Guo, Y.L. Tan, Y.C. et al., Case studies of rock bursts under complicated geological conditions during multi-seam mining at a depth of 800m [J]. Rock Mechanics and Rock Engineering 51, 1539-1564 (2018).
[23] X.J. Deng, Research on the control mechanism of overlying strata movement in the thick-layered longwall roadway cementing filling in extra-thick coal seams. China University of Mining and Technology, (2017).
[24] B . Lu, X.G. Zhang, F. Li, et al., Technology and application of cement-filled mining with short-walled gangue. Journal of China Coal Society 42 (S1), 7-15 (2017).
[25] H. Wadi, S. Amziane, E. Toussaint, et al., Lateral load-carrying capacity of hemp concrete as a natural infill material in timber frame walls. Engineering Structures 180 (2019).
[26] Jiang Bang-you, Gu Shi-tan, Wang Lian-guo, et al., Strainburst process of marble in tunnel-excavation-induced stress path considering intermediate principal stress [J]. Journal of Central South University 26 (4), 984-999 (2019).
[27] W.P. Huang, W.B. Xing, S.J. Chen, et al., Experimental study on sedimentary rock’s dynamic characteristics under creep state using a new type of testing equipment [J]. Advances in Materials Science and Engineering (2017).
[28] G .Z. Lu, J.Q. Tang, Z.Q. Song, Analysis of the difference between the periodic step and the periodic step of the transfer rock beam. Chinese Journal of Geotechnical Engineering 32 (04), 538-54 1(2010).
[29] Z.P. Guo, W.P. Huang, Parameter optimization and stability analysis of sloping strip filling. Journal of China Coal Society 36 (02), 234-238 (2011).
[30] D .W. Yin, S.J. Chen, X.Q. Liu, et al., Effect of joint angle in coal on failure mechanical behavior of roof rock-coal combined body. Q. J. Eng. Geol. Hydroge. 51 (2), 202-209 (2018).
Go to article

Authors and Affiliations

Wenbin Xing
1
ORCID: ORCID
Wanpeng Huang
1
ORCID: ORCID
Fan Feng
1
ORCID: ORCID

  1. Shandong University of Science and Technology, China

This page uses 'cookies'. Learn more