The main aim of this paper is to propose a terminological approach to the standardization of onomastic terminology. Attention is paid to the primary importance of conceptual systems and to the onomasiological approach typical of terminological work. Terminology is presented as a discipline devoted primarily to the study of concepts. Then the main concepts of terminology are discussed and the relations between a conceptual system and a terminological system are explained. An outline of the issue of conceptual systems of onomastics and of their internal structure is made. Then two important metatheoretical concepts are introduced and defined: 1) the concept of theoretical legitimacy of concepts and 2) the concept of economy of conceptual systems. In the final part of the article, several suggestions concerning the standardization of onomastic terminology are made: 1) terms referring to concepts belonging to separate conceptual series are not to be used interchangeably; 2) terms based on different roots (in the English onomastic terminology: -onym, -onymy, -onomastics, in the Polish terminology: -onim, -onimia, -onomastyka) are to be reserved respectively for the concept of a single (type of) proper name, for the concept of a set of proper names and for the concept of a specific onomastic discipline; 3) concepts used or newly introduced in a text are to be defined clearly in onomastic works, 4) onomasticians aiming for standardization of onomastic terminology should start their work by (re)constructing conceptual system(s) of onomastics and only then assign terms to concepts; 5) one completely unitary conceptual (and terminological) system of onomastics cannot be achieved due to the theoretical pluralism of the discipline; 6) the first goal of any conceptual and terminological standardization of onomastics is to define its range: should the standardization cover the concepts of philological or general onomastics? should it cover only empirical (descriptive) concepts or highly abstract theoretical concepts as well?

The article contains preliminary considerations on the principles of the standardization of geographical names in Poland, in particular the names of physiographic objects. The notion of a country’s language policy has been referred to as one of its tools is the standardization of geographical names. The general objectives of the Polish language policy were listed as such: the assertion of legal status of the Polish language as the first language in Poland; the assertion of conditions for the development of national and ethnic minority languages in the country; the construction of a Polish- language national and state community. Legal acts concerning Polish language and geographical nomenclature were indicated. It was stated that the assumed effect of political and linguistic actions should be to develop a nomenclature in correct Polish, one which is pragmatically effective, rooted in tradition and, as a result of this study, one should expect to achieve an optimal course of the language communication process in each communicative community. Then, the criteria of the linguistic correctness of geographical names applied to date were discussed and similarities indicated in the standardization procedure with regards to geonyms and specialist terms. The rules of the detailed standardization procedure will be presented in the second part of the article

The Lithuanian national standard of electric resistance is maintained as the basis for calibration and measurement capabilities published in the key comparison database of the International Bureau of Weights and Measures (BIPM). The stability and uncertainty of the resistance value measurements, performed since 2004 using the calibrated values of the standard resistors to predict their future behaviour as well as influence of environmental conditions, are discussed. Also discussed is the recovery of a standard resistor which had undergone a mechanical disturbance. It is concluded that the standard resistors operated by the Lithuanian National Electrical Standards Laboratory feature stable drift of resistance, which is well predicted by means of linear regression.

This research deals with problems of low standardization of words in the Gamo textbooks, an Afroasiatic Omotic language of Ethiopia. Problems of designating one concept in two or more words, using different linguistic forms for the same grammatical function and degeminating and shortening long consonant and vowel segments were observed. These problems reduce the quality of the textbooks and mother tongue education and put pedagogical and cognitive burden on students.

In the second part of the article, the history of standardization programmes concerning the names of physiographic objects is discussed. The basis of the standardization programme currently followed by the Commission on Names of Localities and Physiographic Objects is described. The paper also presents the criteria of linguistic correctness adopted by the previous standardization commissions as well as by the present one. Issues of linguistic correctness of geographical names with dialectal properties and of names borrowed from minority languages are discussed. Attention is paid to some structural discrepancies in the approaches to the issue of correctness taken by the Commission on Names of Localities and Physiographic Objects and by local authorities.

The text comprises the evaluation of relationship between the qualitative planning tools and the Irish housing policy in the pre-crisis period, during the crisis (2009-2013) and the recovery. The tools that affect housing are understood as spatial planning, including governmental regulations on densification of the development and the housing quality as well as the special tools such as the urban design. Those regulatory tools were deployed with aims to safeguard the sustainable and socially viable housing structures. The Irish case illustrates the considerable innovation in introducing new housing standards and challenges with their efficiency. This can be attributed to the lack of integration with other elements that shaped the market – financing and actions of the private market, low efficiency of planning or the lack of the scale effect for the model developments. Despite their drawbacks these tools are continuously being used, as their foundational principles are still valid.

Drought is known as a normal part of climate and including in a slow-onset natural hazard which may have several im-pacts on hydrology, agriculture, and socioeconomic. Drought monitoring, including its severity, spatial and duration is re-quired and becomes an essential input for establishing drought risk management and mitigation plan. Many drought indices have been introduced and applied in regions with different climate characteristics in the last decades. This paper aims to compare standardized precipitation index (SPI) and rainfall anomaly index (RAI) along with standardized streamflow index (SSI) in Pekalen River Basin, East Java, Indonesia. The statistical association analyses, included the Pearson correlation (r), Kendal tau (τ), and Spearman rho (rs) were performed to examine the degree of consistency between monthly and annual drought index of SPI and RAI. Additionally, the comparative analysis was performed by overlapping both monthly and an-nual drought index from the SPI and RAI with the SSI at hydrological years. The study revealed that the characteristic of the annual drought index between the SPI and RAI exhibits pattern similarity which indicated by the high correlation coeffi-cient between them. Further, the comparative analysis on each hydrological year showed that the SPI and RAI were very well correlated and exhibited a similar pattern with the SSI. Overall, the SPI shows better performance than the RAI for es-timating drought characteristic either monthly or annual basis. Hence, the SPI is considered as a reliable and effective tool for analyzing drought characteristic in the study area.

For a very long period of time, Polish waste management was based mainly on landfilling at landfills, which had a negative impact on the surrounding environment. The EU requirements for the Member States have led to a revolution in Polish legislation on waste management and local governments have become responsible for creating local waste management systems that will affect the achievement of EU targets. One of the solutions undertaken by several municipalities is the construction and operation of a municipal waste thermal treatment installation, which not only reduced the amount of waste deposited, but also supported the local power industry by generating electricity and heat. The emission standards for installations producing energy from waste, as in the case of conventional power plants and combined heat and power plants, are very strict, therefore, the continuous monitoring of emitted pollutants is carried out, and waste gas treatment systems are developed based on the best available techniques (BAT). The article presents emission standards applicable to waste incineration plants, including duties in the field of the environment, as well as issues related to the installation as a source of energy. In addition, the currently functioning waste incineration plants in Poland have been briefly characterized, and development plans in this area in the country have been described.

In the text, a polemic is undertaken against the model of the child expected in Polish institutions of early childhood education, and which appropriates the rationalities producing social practices. The source of this model is in the logic of standardization whose cognitive and effects on identity are criticized by the author. Identifying the sources of validation of the practices normalizing some children and stigmatizing others, who do not meet the requirements of the cognitively rigid and morally trivialized standards, the text points to developmental psychology as a discipline which potentially triggers this form of oppression. In conclusion, the author describes briefly a number of examples of educational solutions in which an attempt has been made to move beyond the discourse of standardized quality in child education.

Four types of self-standards (ideal, ought, undesired, and forbidden selves) were analyzed in the context of self-assessed health of older adults. We focused on the relationships between self-discrepancies (perceived actualization of self-standards) and affect, as well as the content of self-descriptions of standards. Participants (116 Polish older adults) completed: Self Standards’ Measure (SSM), PANAS-X and 7 items from the WHOQOL-BREF. First, we found that self-assessed health moderates the effects of self-discrepancies on affect. The ideal and ought self-discrepancies predicted affect when health was assessed as good. Conversely, the undesired and forbidden self-discrepancies predicted affect when health was assessed as poor. Second, health-related content was more typical for the ideal than for the ought standards. Third, older adults who assessed their health better had fewer health-related standards. The results are discussed with reference to control theory of approach and avoidance.

The aim of this paper is a comparative analysis of the experimental test results of twenty T-section beams reinforced with glass fiber reinforced polymer (GFRP) bars without stirrups with predicted values of the shear capacity according to the following design guidelines: draft Eurocode 2, Japanese JSCE, American ACI 440, Italian CNR- DT-203/2006, British BS according to fib Bulletin 40, Canadian CSA-S806-12 and ISIS-M03-07. Standard procedures for FRP reinforced beams based on traditional steel reinforced concrete guidelines. The longitudinal FRP reinforcement has been taken into account by its stiffness reduction related to the steel reinforcement. A basis of this modification is the assumption that the FRP-to-concrete bond behaviour is the same as it is for steel reinforcement. To assess the compatibility of predicted values (Vcal) with the experimental shear forces (Vtest) the safety coefficient η = Vtest / Vcal was used. The results corresponding to values η < 1 indicates overestimation of the shear capacity, but η > 1 means that shear load capacity is underestimated. The most conservative results of the calculated shear capacity are obtained from the ACI 440 standard. In contrast to them the best compatibility of the calculated shear values to the experimental ones indicated British BS standard, fib Bulletin 40 and Canadian CSA-S806-12 standard.

The paper points out the role of terms in academic activity, particularly in onomastics. A survey of onomastic terms present in Polish dictionaries of linguistic terminology and onomastic encyclopaedias has been made. The need has been stressed to follow the rules of terminography in every dictionary of terms. Some normative terms, such as official name, dialectal name, minority name, have been suggested to be included as additional entries in glossaries of onomastic terms.