So far, numerous studies have been published on the selection of appropriate maintenance tactics based on some factors affecting them such as time, cost, and risk. This paper aims to develop the TRIZ contradiction matrix by explaining the dimensions and components of each of the following Reactive maintenance tactics. The related findings of previous studies were analyzed by adopting “Rousseau and Sandoski” seven-step method to identify and extract the relationships between TRIZ principles and Reactive maintenance tactics. Thereafter, 5 Reactive maintenance tactics were replaced TRIZ’s 40 principles in the TRIZ contradiction matrix. Finally, the ANP method were used to extract and prioritize the appropriate Reactive maintenance tactics. The proposed matrix in this research was used in the desalination section of one of the oil companies to select on the appropriate Reactive maintenance tactics. The results of this research is useful for managers and maintenance specialists of units in making decisions to provide appropriate Reactive maintenance tactics for the desired equipment.

The use of CaO-based adsorbents has a high potential to capture CO2 from various systems due to its high reactivity with CO2, high capacity, and low cost of naturally derived CaO. The application of CaO-based sorbents to remove carbon dioxide is based on a reversible reaction between CaO and CO2. However, multiple carbonation/calcination cycles lead to a rapid reduction in the sorption capacity of natural CaO, and therefore efforts are made to reduce this disadvantage by doping, regenerating, or producing synthetic CaO with stable sorption properties. In this review, the synthesis methods used to obtain CaO-based sorbents were collected, and the latest research on improving their sorption properties was presented. The most commonly used models to describe the CO2 sorption kinetics on CaO-based sorbents were also introduced. The methods of sorbent regeneration and their effectiveness were summarized. In the last part of this review, the current state of advancement of work on the larger scale, possible problems, and opportunities during scale-up of the calcium looping process were presented. Concluding (i) the presented methods of adsorbent synthesis allow for the production of doped CaO adsorbents on a laboratory scale, characterized by high CO2 capture efficiency and good cyclic stability, (ii) the most commonly used in practice models describing CO2 chemisorption are empirical models and the shrinking core model, (iii) the use of sorbent regeneration allows for a significant improvement in sorption capacity, (iv) the scale-up of both the production of new CaO adsorbents and the CO2 capture technology with their use requires further development.