Applied sciences

Archives of Control Sciences

Content

Archives of Control Sciences | 2020 | vol. 30 | No 2

Download PDF Download RIS Download Bibtex

Abstract

The paper is devoted to the finding of the coefficient of one nonlinear wave equation in the mixed problem. The considered problem is reduced to the optimal control problem with proper functional. Differentiability of functional is proved and the necessary optimality conditions are derived in the form of the variational inequality. Existence of the optimal control is proved.

Go to article

Authors and Affiliations

Zumrud R. Safarova
Download PDF Download RIS Download Bibtex

Abstract

A method of creating production schedules regarding production lines with parallel machines is presented. The production line setup provides for intermediate buffers located between individual stages. The method mostly concerns situations when part of the production machines is unavailable for performance of operations and it becomes necessary to modify the original schedule, the consequence of which is the need to build a new schedule. The cost criterion was taken into account, as the schedule is created with the lowest possible costs regarding untimely completion of products (e.g. fines for delayed product completion). The proposed method is relaxing heuristics, thanks to which scheduling is performed in a relatively short time. This was confirmed by the presented results of computational experiments. These experiments were carried out for the rescheduling of machine parts production.

Go to article

Authors and Affiliations

Marek Magiera
Download PDF Download RIS Download Bibtex

Abstract

This paper aims to propose a new multi-attribute decision making (MADM) method in complicated and fuzzy decision-making environment. To express both decision makers (DMs’) quantitative and qualitative evaluation information comprehensively and consider their high hesitancy in giving their assessment values in MADM process, we combine q-rung dual hesitant fuzzy sets (q-RDHFSs) with uncertain linguistic variables and develop a new tool, called the q-rung dual hesitant uncertain linguistic sets (q-RDHULSs). First, the definition, operations and comparison method of q-RDHULSs are proposed. Second, given the interrelationship among multiple q-rung dual hesitant uncertain linguistic variables (q-RDHULVs) we introduce some aggregation operators (AOs) to fuse q-rung dual hesitant uncertain linguistic (q-RDHUL) information based on the Muirhead mean, i.e. the q-RDHUL Muirhead mean operator, the q- RDHUL weighted Muirhead mean operator, the q-RDHUL dual Muirhead mean operator, and the q-RDHUL weighted dual Muirhead mean operator. To cope with MADM problems with q-RDHUL information, we propose a new method based on the proposed AOs. Afterwards, we apply the proposed method to an enterprise informatization level evaluation problem to verify its effectiveness. In addition, we also explain why our proposed method is more powerful and flexible than others.

Go to article

Authors and Affiliations

Jun Wang
Xiaopu Shang
Xue Feng
Mengyang Sun
Download PDF Download RIS Download Bibtex

Abstract

In the paper, the results of investigations on the location of generating units most affecting the angular stability of a large power system (PS) are presented. For their location, the eigenvalues of the PS model state matrix associated with electromechanical phenomena (electromechanical eigenvalues) were used. The eigenvalues were calculated on the basis of the analysis of the disturbance waveforms of instantaneous power of the generating units operating in the PS. The used method of calculating eigenvalues consists in approximation of the disturbance waveforms of generating units by the waveforms being the superposition of modal components. The parameters of these components depend on the sought eigenvalues and their participation factors. The objective function was defined as the mean square error between the approximated and approximating waveforms. To minimize it, a hybrid algorithm, being a combination of genetic and gradient algorithms, was used. In the instantaneous power waveforms of generating units most affecting the PS angular stability, the least damped or undamped modal components dominate. They are related to eigenvalues with the largest values of real parts. The impact of individual modal components on the disturbance waveforms of subsequent generating units was determined with the use of participation factors and correlation coefficients of electromechanical eigenvalues.

Go to article

Authors and Affiliations

Piotr Pruski
ORCID: ORCID
Stefan Paszek
ORCID: ORCID
Download PDF Download RIS Download Bibtex

Abstract

The main goal of introducing Active Suspension System in vehicles is to reduce the vehicle body motion under road obstacles which improves the ride comfort of the passenger. In this paper, the Full Car Model (FCM) with seven Degrees of Freedom is considered and simulated by MATLAB/Simulink. The Terminal Sliding Mode Controller (TSMC) and Fractional Order Terminal Sliding Mode Controller (FOTSMC) are designed to enhance the ride quality, stability and passenger comfort for FCM. The designed FOTSMC has the ability to provide higher control accuracy in a finite time. The performances of the designed controllers are evaluated by measuring the vehicle body vibration in both angular and vertical direction under bump input and ISO-8608 random input against passive suspension system. The FrequencyWeighted Root Mean Square (FWRMS) and Vibration dose value of Body Acceleration as per ISO-2631 are evaluated for FOTSMC, TSMC and PSS. The stability of the FCM is proved by Lyapunouv theory. Further analysis with sprung mass and speed variation of FCM demonstrate the robustness of proposed controller. To investigate the performances of designed controllers, comparison is made with existing Sliding Mode Controller (SMC) which proves that the designed FOTSMC performs better than existing SMC.

Go to article

Authors and Affiliations

T. Yuvapriya
P. Lakshmi
S. Rajendiran
Download PDF Download RIS Download Bibtex

Abstract

Model predictive control (MPC) algorithms brought increase of the control system performance in many applications thanks to relatively easily solving issues that are hard to solve without these algorithms. The paper is focused on investigating how to further improve the control system performance using a trajectory of parameters weighting predicted control errors in the performance function of the optimization problem. Different shapes of trajectories are proposed and their influence on control systems is tested. Additionally, experiments checking the influence of disturbances and of modeling uncertainty on control system performance are conducted. The case studies were done in control systems of three control plants: a linear non- minimumphase plant, a nonlinear polymerization reactor and a nonlinear thin film evaporator. Three types of MPC algorithms were used during research: linear DMC, nonlinear DMC with successive linearization (NDMC–SL), nonlinear DMC with nonlinear prediction and linearization (NDMC–NPL). Results of conducted experiments are presented in greater detail for the control system of the polymerization reactor, whereas for the other two control systems only the most interesting results are presented, for the sake of brevity. The experiments in the control system of the linear plant were done as preliminary experiments with the modified optimization problem. In the case of control system of the thin film evaporator the researched mechanisms were used in the control system of a MIMO plant showing possibilities of improving the control system performance.

Go to article

Authors and Affiliations

Robert Nebeluk
Piotr Marusak
Download PDF Download RIS Download Bibtex

Abstract

This paper proposes the development of a formation control algorithm of multiple acoustic underwater vehicles by employing the behaviour of autonomous mobile agents under a proposed pursuit. A robust pursuit is developed using the distributed consensus coordinated algorithm ensuring the transfer of information among the AUVs. The development of robust pursuit based on characteristics of multi-agent system is for solving the incomplete information capabilities in each agent such as asynchronous computation, decentralized data and no system global control. In unreliable and narrow banded underwater acoustic medium, the formation of AUVs based distributed coordinated consensus tracking can be accomplished under the constant or varying virtual leader’s velocity. Further, the study to achieve tracking based on virtual leader AUV’s velocity is extended to fixed and switching network topologies. Again for mild connectivity, an adjacency matrix is defined in such a way that an adaptive connectivity is ensured between the AUVs. The constant virtual leader vehicle velocity method based on consensus tracking is more robust to reduce inaccuracy because no accurate position and velocity measurements are required. Results were obtained using MATLAB and acquired outcomes are analysed for efficient formation control in presence of the underwater communication constraints.

Go to article

Authors and Affiliations

Bikramaditya Das
Bidyadhar Subudhi
Bibhuti Bhusan Pati

Instructions for authors

Each paper submitted is subject to a review procedure, and the publication decision is based on reviers' comments on the paper. To avoid delay, please prepare the manuscript carefully following the suggestions listed below.

Computer file of the manuscript may be sent by e-mail to the address of Assistant Editor or acs@polsl.pl. Preferred text processors is TeX or LaTeX, however Word and other processors are also acceptable. In case of difficulties in processing the text, the author may be asked to supply the ASCII export of the original file.

Manuscripts sent via ordinary post should be typewritten double-spaced on one side of a standard size (A4) paper. Left side margin should be approximately 3cm (1.2'') wide. Each page should contain approximately 30 lines of 60 characters each. The manuscript including figures and tables together with their captions should be submitted. A separate signed letter giving the Author's preferred address for correspondence and return of proofs should be enclosed. Manuscript is the basis for editorial work.

First page should include the title of the paper, first name(s) and surname(s) of the Author(s), and a short summary (abstract), not longer than 20 lines.

Keywords of max. 5 - 7 items should be included in manuscript.

Numeration. All chapters, including the introduction, should be numbered in arabic numerals. Equations, tables and figures as well as theorems, corollaries, examples etc., should be numbered consecutively throughout the paper in arabic numerals, except in appendices. Appendices should be numbered with capital letters, and numeration should be closed within individual appendices.

If the manuscript is not prepared with TeX, mathematical expressions should be carefully written so as not to arouse confusion. Care should be taken that subscripts and superscripts are easily readable.

Tables and figures should be placed as desired by the Author within the text or on separate sheets with their suggested location indicated by the number of table or figure in the text. Figures, graphs and pictures (referred to as Fig. in the manuscript) should be numbered at the beginning of their caption following the figure. All figures should be prepared as PostScript EPS files or LaTeX picture files; in special cases, bitmaps of figure are also acceptable. The numbers and titles of tables should be placed above the main body of each table.

References should be listed alphabetically at the end of the manuscript. They should be numbered in ascending order and the numbers should be inserted in square brackets. References should be organized as follows. First initial(s), surname(s) of the author(s) and title of article or book. Then, for papers: title of periodical or collective work, volume number (year of issue), issue number, and numbers of the first and the last page; for books: publisher's name(s), place and year of issue. Example:

  1. R. E. Kalman: Mathematical description of linear dynamical system. SIAM J. Control. 1(2), (1963), 152-192.
  2. F. C. Shweppe: Uncertain dynamic systems. Prentice-Hall, Englewood Cliffs, N.J. 1970.


Please, give full titles of journals; only common words like Journal, Proceedings, Conference, etc. may be abbreviated ( to J., Proc., Conf., ... respectively). References to publications in the body of the manuscript should be indicated by the numbers of the adequate references in square brackets. When the paper is set in TeX the preferable form of preparing references is Bib TeX bib database.

Footnotes should be placed in the manuscript, beginning with "Received..." (date to be filled in by Editor), the author's institutional affiliation and acknowledgement of financial support,

This page uses 'cookies'. Learn more