This paper presents the recent advances in pervaporative reduction of sulfur content in gasoline. Methods of preliminary selection of membrane active layer material are presented. Interactions between gasoline components (typical hydrocarbon and sulfur species) and membranes are showed. Influence of pervaporation process parameters i.e. feed temperature, downstream pressure and feed flow rate on the separation efficiency is discussed. Investigations of the influence of sulfur concentration in fluid catalytic cracking (FCC) gasoline on membrane performance have been conducted. A series of PV tests was carried out to investigate the separation properties of the commercial composite membrane with an active layer made of poly(dimethylsiloxane) and to determine the efficiency of organic sulphur compound (thiophene) removal from model thiophene/n-heptane mixture depending on its concentration.
Polybrominated diphenyl ethers (PBDEs) levels in environmental media have increased over the last 20-25 years in the world. In aquatic environments PBDEs were found to be accumulated along food chain and Endocrine disruptors toxicity. In this study PBDEs were investigated in sediment and fish tissues from Lake Chaohu in central eastern China. There were 10 PBDEs congeners detected out of all 41 PBDEs. BDE-47 was of the highest with 5.17 ng/g in sediment and 58.47 ng/g in fish. PBDEs were evenly distributed across the surface sediment in the whole lake. It implied that the main source of PBDEs may not be an inflow river like Nanfei. Tissue distribution patterns of PBDEs in four fish species were in the order of BDE-47 > BDE-99 > BDE-100 > BDE-66 > BDE-138 > BDE-183 > BDE-154 > BDE-153. Octa- and deca-BDEs were below the detection limit. The concentrations of all PBDE congeners were higher in gills, livers, and kidneys than those in muscles and adipose tissue. Furthermore, PBDEs in different tissues had some different distribution patterns with fish size. Those discrepancies appeared to be correlated with the PBDEs pollution fluxes varying with the change of the year and their metabolism divergences in fish tissues.
Uranium concentrations in groundwater taken from private drilled wells have been never determined in Poland, implying a lack of available data to quantify the human exposure to U through drinking water consumption, especially in rural areas influenced by mining activities. The main aim of the study was the assessment of human health risk related to the consumption of well waters containing U, collected from selected rural areas of the Lower Silesian region (Poland). The random daytime (RDT) sampling method was applied to the collection of well waters from three control study areas (CSA): Mniszków (CSA-A), Stara Kamienica/M. Kamienica/Kopaniec (CSA-B) and Kletno (CSA-C). The analyses of RDT samples were performed by validated method based on inductively coupled plasma mass spectrometry (ICP-MS). Uranium concentration ranges in well waters and the estimated geometric means for individual control study areas were: 0.005-1.03 μg/L and 0.052 μg/L (CSA-A), 0.027-10.6 μg/L and 0.40 μg/L (CSA-B), and 0.006-27.1 μg/L and 0.38 μg/L (CSA-C). The average and individual chronic daily intakes (CDI) of U by drinking water pathway (adults/children) were in the ranges of: 0.0017-0.013/0.0052-0.040 μg · kg-1 · day-1 and 0.0002-0.90/0.0005-2.71 μg · kg-1 · day-1. The average %TDI and ranges of individual %TDI (adults/children) were: 0.17%/0.52% and 0.02-3.4%/0.05-10.3% (CSA-A), 1.3%/4.0% and 0.09-35%/0.27-106% (CSA-B), and 1.3%/3.8% and 0.02-90%/0.06-271% (CSA-C). The estimated average CDI values of U through well water are significantly lower than the TDI (1 μg · kg-1 · day-1), while for individual CDI values the contribution to the TDI can reach even 90% (adults) and 271% (children), indicating essential human health risk for children consuming well water from private drilled wells located in CSA-B and CSA-C (5.3% of total number of samples collected).
The paper presents a method of identifying distant emission sources of fine particulate matter PM2.5 affecting significantly PM2.5 concentrations at a given location. The method involves spatial analysis of aggregate information about PM2.5 concentrations measured at the location and air masses backward trajectories calculated by HYSPLIT model. The method was examined for three locations of PM2.5 measurement stations (Diabla Góra, Gdańsk, and Katowice) which represented different environmental conditions. The backward trajectories were calculated starting from different heights (30, 50, 100 and 150 m a. g. l.). All points of a single backward trajectory were assigned to the PM2.5 concentration corresponding to the date and the site of the beginning of trajectory calculation. Daily average concentrations of PM2.5 were used, and in the case of Gdańsk also hourly ones. It enabled to assess the effectiveness of the presented method using daily averages if hourly ones were not available. Locations of distant sources of fine particulate matter emission were determined by assigning to each grid node a mean value of PM2.5 concentrations associated with the trajectories points located within the so-called search ellipse. Nearby sources of fine particulate matter emission were eliminated by filtering the trajectories points located close to each other (so-called duplicates). The analyses covered the period of January-March 2010. The results indicated the different origin of air masses in the northern and southern Poland. In Diabla Góra and Gdańsk the distant sources of fine particulate matter emission are identified in Belarus and Russia. In Katowice the impact of the Belarusian PM2.5 emission sources was also noted but as the most important fine particulate matter emission sources were considered those located in the area of Romania, Hungary, Slovakia and Ukraine.
System Dynamics is methodology for modeling and analyzing complex systems. Such systems can be characterized by interconnectedness and feedback. Applying risk assessment to the results of System Dynamics models is a challenge. Though in some cases the resulting time series data generated by a simulation may appear approximately random at a specific scale, there is often a high-degree of auto-correlation within the data series due to the deterministic nature of generation and feedback loops inherent in the system. This paper presents proposed Dynamic Risk Assessment Method (DRAM) that allows for the estimation of risk for system dynamics data series that appear to be approximately random. DRAM is based on standard risk assessment methods and is simple both to calculate and apply. In this article, the proposed method is applied to determine the risk connected with hypothetical costs of illness stemming from water supply system contamination with Cryptosporidium.
Microbiological and chemical analysis of air was carried out on the area of landfill of wastes other than inert or hazardous. The landfill covers 20 ha and 40 000 Mg of wastes is deposited annually. Municipal waste is not segregated at the landfill. The research was conducted in April, May and November 2012. Number of the psychrophilic and mesophilic bacteria and fungi was estimated by a culture-based method. Quantitative determination of sulfur compounds and meteorological and olfactrometric examinations were also carried out. Chemical analysis was conducted with a Photovac Voyager portable gas chromatograph. Air samples were collected at 5 points. The largest group of microbes were psychrophilic bacteria, especially in summer. The highest concentration of hydrogen sulfide and other odorants was found at leachate tank and landfill body. According to the Polish Standard for the assessment of atmospheric air pollution the air in the area of the landfill is classified as not contaminated and sporadically moderately contaminated. In spring and summer the number of microscopic fungi was increased also in control samples.
Red basil (Ocimum basilicum L.) cv. Red Rubin was cultivated in model pot experiment in the soil amended by arsenic, cadmium and lead solutions in stepwise concentrations representing the soil concentration levels of former mining area in the vicinity of Příbram, Czech Republic. The element levels added to the soil reached up to 40 mg Cd, 100 mg As, and 2000 mg Pb per kg of soil. Moreover, essential macro-and microelements as well as cyanidine contents were investigated to assess their potential interactions with the risk elements. The extractable element portions in soils determined at the end of vegetation period differed according to the individual elements. Whereas the plant-available (extractable with 0.11M CH3COOH) content of Cd represented 70-100% of the added Cd, the mobile portion of Pb did not exceed 1%. The risk element content in plants reflected the increasing element contents in soil. The dominant element portions remained in plant roots indicating the limited translocation ability of risk elements to the aboveground biomass of this plant species. Although the risk element contents in amended plants significantly increased, no visible symptoms of phytotoxicity occurred. However, the effect of enhanced risk element contents on the essential element uptake was assessed. Considering inter-element relationships, elevated sulphur levels were seen in amended plants, indicating its possible role of phytochelatin synthesis in the plants. Moreover, the molybdenum contents in plant biomass dropped down with increasing risk element uptake by plants confirming As-Mo and Cd-Mo antagonism. The increasing content of cyanidine in the plant biomass confirmed possible role of anthocyanins in detoxification mechanism of risk element contaminated plants and suggested the importance of anthocyanin pigments for risk element tolerance of plants growing in contaminated areas.
The research aimed to use chemical, geochemical, and ecotoxicity indices to assess the heavy metals content in soils with different degrees of exposure to human pressure. The research was conducted in southern Poland, in the Malopolska (Little Poland) province. All metal contents exceeded geochemical background levels. The highest values of the Igeo index were found for cadmium and were 10.05 (grasslands), 9.31 (forest), and 5.54 (arable lands), indicating extreme soil pollution (class 6) with this metal. Mean integrated pollution index (IPI) values, depending on the kind of use, amounted to 3.4 for arable lands, 4.9 for forests, and 6.6 for grasslands. These values are indicative of a high level of soil pollution in arable lands and an extremely high level of soil pollution in grasslands and forests. Depending on the type of soil use, Vibrio fischeri luminescence inhibition was from -33 to 59% (arable lands), from -48 to 78% (grasslands), and from 0 to 88% (forest). Significantly the highest toxicity was found in soils collected from forest grounds.
In this study, heavy metals pollutions in waters, soils and vegetables were investigated from farms, near oil refinery in south of Tehran city, Iran (Shahre Ray). The most important heavy metals in Iranian oil are vanadium, cobalt, nickel, arsenic and mercury (V, Co, Ni, As, Hg). In this region, the concentration of heavy metals in soils, well waters and leafy edible vegetables were evaluated in ten different points of farms. Geographic information systems (GIS) were used to estimate the levels of heavy metals concentration at unmeasured locations. After sample preparation, concentrations of heavy metals in vegetables, soils and waters were determined by atomic absorption spectrometry (AAS). Five different leafy edible vegetables from farms, i.e., Persian leek, dill, parsley, spinach and radish were sampled in spring, summer and autumn 2012. In vegetables and well water samples, the concentrations of V, Ni and Co were above the permissible limit of heavy metals as compared to WHO guidelines and the concentrations of these metals in agricultural soils were found to be lower in accordance to soil references. The industrial waste waters had high concentration of heavy metals in this area. In consequence, the results of this study indicate that industrial waste water can cause pollution in well waters and edible vegetables. So, this region is not suitable for cultivation and growing vegetables.
The aim of study was to investigate the effect of nutrient solution leakage during plant cultivation in greenhouse on soil pollution. Investigations were conducted in horticultural farms in the Wielkopolskie province (Greater Poland), specializing in soilless plant cultivation in greenhouse. In the first farm located on sandy soil tomato has been grown since its establishment (Object A). Prior to the beginning of crop culture soil samples were collected for analyses at every 0.2 m layer, to the depth of one meter. Successive samples were taken also in autumn after the completion of 1, 2, 3 and 7 culture cycles. For comparison, research was also conducted in a greenhouse located on loamy sand/sandy loam soil used for 8 years for tomato culture (Object B). In all these facilities plants in rockwool were grown and the fertigation in an open system was provided. Chemical analyzes showed the dynamics of soil properties changes and vertical distribution of cations and anions within the soil profile. Increased content of almost all nutrients and particularly of S-SO4, P, K, Zn, N-NH4, N-NO3 in the soil profile in object A and S-SO4, K, P, N-NO3 in the soli profile in object B were recorded. The results showed that the degradation rate of the soil environment as a result of open fertigation system application depends primarily on the duration of greenhouse operation. However, explicit changes in the chemical properties of soils were observed already after the first growth cycle. Smaller doses of fertilizers and water, and in consequence reduction of nutrients losses may be achieved by closed fertigation systems.
The study was conducted in the area of the impact of sulfur mine in Jeziórko. The aim of the study was to assess changes in pH, cation exchange capacity and content of available phosphorus, potassium and magnesium after 6 years of conducting remediation. In the experiment (plots with an area of 15 m2) degraded soil was rehabilitating by post-floating lime and compost from sewage sludge, sewage sludge and ash from combined heat and power (CHP). Composts at a dose of dry matter 180 t · ha-1 (6%), were determined in accordance with Minister of the Environment Regulation from 2001, applied the following options: control (only native soil limed), compost from municipal sewage sludge, sewage sludge compost (80%) and ash (20%), compost from sewage sludge (70%) and ash (30%). The reclaimed plots were sown with mixture of rehabilitation grass. Single de-acidification, land fertilization and a further 6-year extensive (without fertilization) use had a different influence on the properties of the native soilless substratum. Irrespective of the reclamation manner, after six years land use in the upper layers, observed increase in the average content of available phosphorus, available potassium content does not changed significantly but recorded a tenfold decrease in the content of available magnesium.
To subscribe to the magazine enter the email address:
*Fields marked with an asterisk are mandatory to be filled in and checked. To Subscribe to the journal you must agree to the processing of personal data.