The analysis of after reclamation dusts generated during the reclamation treatment of test portions of two kinds of polydispersive material in the Regmas device, is presented in the hereby paper. For the comparative purpose the fresh moulding sand marked as quartz sand „Sibelco” –1K 0.40/0.32/0.20, J88, >14000C, WK = 1.20 (acc. PN-83/H-11077), as well as the spent moulding sand, which was previously subjected to the primary reclamation and to dedusting, were used. Conditions of the process treatment were forced by the frequency of supplying the vibratory drive motors being successively 40, 50 and 60Hz for 5, 10 and 15 min. and by causing a diversified material flow through the functional system of the device (charging hopper, abrasive chamber acting as a buffer space). Two states of the process treatment, when a material was flowing through the chamber, were applied. In the first one, an intergranular surface abrasion of grains occurred as a result of the granular material circulation in the chamber forced by the vibratory drive. In the second one, the forced material flow was performed in the presence of crushing elements (steel balls), additionally introduced into the abrasive chamber. Analyses of the device influence were performed by determinations of the amount of dusts separated in the pneumatic classifier and analysis of their grain sizes by means of Analysette 22NanoTec.