Nauki Techniczne

Bulletin of the Polish Academy of Sciences Technical Sciences

Opis

The Bulletin of the Polish Academy of Sciences Technical Sciences is published bimonthly by the Division IV Engineering Sciences of the Polish Academy of Sciences, since the beginning of the existence of the PAS in 1952. The journal is peer‐reviewed and is published both in printed and electronic form. It is established for the publication of original high quality papers from multidisciplinary Engineering sciences with the following topics preferred:

Artificial and Computational Intelligence,
Biomedical Engineering and Biotechnology,
Civil Engineering,
Control, Informatics and Robotics,

Electronics, Telecommunication and Optoelectronics,
Mechanical and Aeronautical Engineering, Thermodynamics,
Material Science and Nanotechnology,
Power Systems and Power Electronics.

Submit your article

Journal Metrics:

JCR Impact Factor 2023:	1.2
5 Year Impact Factor 2022:	1.1
CiteScore 2023:	2.8
SCImago Journal Rank (SJR) 2023:	0.282
Source Normalized Impact per Paper (SNIP) 2023:	0.573
Ministry of Education and Science:	100 points

Abbreviated title: Bull. Pol. Acad. Sci. Tech. Sci.

ISSN

ISSN 2300-1917

Editorial Board 2023-2025

Editor-in-Chief:

A. Rogalski, Military University of Technology

Honorary (Past) Editor-in Chief:

T. Kaczorek, Warsaw University of Technology

M.P. Kaźmierkowski, Warsaw University of Technology

Deputy Editor-in-Chief:

B. Błachowski, Institute of Fundamental Technological Research PAN

M. Mrozowski, Gdansk University of Technology

Board of Topical Co-editors:

Artificial and Computational Intelligence

S. Osowski, B. Sawicki and T. Leś, Warsaw University of Technology

Biomedical Engineering and Biotechnology

D. Pijanowska, Institute of Biocybernetics and Biomedical Engineering PAN

Civil Engineering

L. Czarnecki, Building Research Institute, ITB, Warsaw

Ł. Sadowski, Wroclaw University of Science and Technology

Control, Robotics and Informatics

J. Klamka and A. Babiarz, Silesian Technical University

J. Stefanowski, Poznan University of Technology

Electronics, Telecommunication and Optoelectronics

M. Mrozowski and A. Lamęcki, Gdansk University of Technology

Mechanical and Aeronautical Engineering, Thermodynamics

B. Błachowski, Institute of Fundamental Technological Research PAN

G. Zboiński, Institute of Fluid-Flow Machinery PAN and University of Warmia and Mazury in Olsztyn

Materials Science and Nanotechnology

B. Major and P. Czaja, Institute of Metallurgy and Materials Science PAN

Power Systems and Power Electronics

J. Rąbkowski and M. Jasiński, Warsaw University of Technology

International Editorial Advisory Board

R. Asthana, University of Wisconsin-Stout, Menomonie, USA

Xu Binshi, China Association of Plant Engineering, Beijing, P.R. China

F. Blaabjerg, Aalborg University, Denmark

C. Cecati, University of L’Aquila, Italy

A. Cichocki, RIKEN Institute, Tokyo, Japan

M. David, National Polytechnique de Toulouse, France

R. Ebner, Materials Centre Leoben, Leoben, Austria

E. Fornasini, University of Padova, Padova, Italy

L.G. Franquelo, University of Sevilla, Spain

M. Gad-el-Hak, Virginia Commonwealth University, Richmond, USA

M. Giersig, Free University of Berlin, Germany

D. van Gemert, Catholic University Leuven, KU Leuven, Belgium

L. Keviczky, Hungarian Academy of Sciences, Budapest, Hungary

V. Kučera, Czech Technical University in Prague, Prague, Czech Republic

R. Kennel, Technical University Munich, Germany

T.A. Kowalewski, Institute of Fundamental Technological Research PAN

E. Levi, Liverpool John Moore University, UK

G. Maier, Technical University of Milan, Milan, Italy

K.F. Man, City University of Hong Kong,

R. Maniewski, Institute of Biocybernetics and Biomedical Engineering PAN

H.A. Mang, Austrian Academy of Sciences, Vienna, Austria

H. Mihashi, Tohoku University, Aoba-ku, Sendai, Japan

S. Mindess, University of British Columbia, Vancouver, Canada

D.A. Mlynski, University of Karlsruhe, Karlsruhe, Germany

A.S. Nowak, University of Michigan, Ann Arbor, USA

K. Ohnishi, Keio University, Yokohama, Japan

A. Öberg, Linköping University, Linköping, Sweden

W. Pedrycz, University of Alberta, Canada

M. Razeghi, Northwestern University, Evanston, USA

J. Rodriguez, University of Andres Bello, Santiago, Chile

J.V. Sloten, Catholic University Leuven, Leuven, Belgium

B.M. Wilamowski, University of Auburn, Alabama, USA

A.L. Yarin, University of Illinois at Chicago, USA

Du Xiangwan, Chinese Academy of Engineering, China

J. Żurada, Department of Computer Engineering, University of Louisville, USA

Editorial Office:

Pałac Kultury i Nauki

Wydział IV Nauk Technicznych PAN

Pl. Defilad 1

PL 00-901 Warszawa

Managing Editor:

Renata Podraza, e-mail: Renata.Podraza@pan.pl

Finance:

Katarzyna Łasak, e-mail: Katarzyna.Lasak@pan.pl

The Bulletin of the Polish Academy of Sciences Technical Sciences is an open access journal with all content available with no charge in full text version.

The journal content is available under the licencse CC BY 4.0 https://creativecommons.org/licenses/by/4.0/.

Roczniki i numery
Instrukcja dla autorów
Dodatkowe informacje

Wybierz numer

Zawartość

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3

1 Contents

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3

Pobierz PDF Pobierz RIS Pobierz Bibtex

2 Lung cancer detection using an integration of fuzzy K-Means clustering and deep learning techniques for CT lung images

J. Maruthi Nagendra Prasad , S. Chakravarty , M. Vamsi Krishna

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e139006 | DOI: 10.24425/bpasts.2021.139006

Słowa kluczowe: fuzzy K-Means artificial neural networks SVM crow search optimization algorithm

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Computer aided detection systems are used for the provision of second opinion during lung cancer diagnosis. For early-stage detection and treatment false positive reduction stage also plays a vital role. The main motive of this research is to propose a method for lung cancer segmentation. In recent years, lung cancer detection and segmentation of tumors is considered one of the most important steps in the surgical planning and medication preparations. It is very difficult for the researchers to detect the tumor area from the CT (computed tomography) images. The proposed system segments lungs and classify the images into normal and abnormal and consists of two phases, The first phase will be made up of various stages like pre-processing, feature extraction, feature selection, classification and finally, segmentation of the tumor. Input CT image is sent through the pre-processing phase where noise removal will be taken care of and then texture features are extracted from the pre-processed image, and in the next stage features will be selected by making use of crow search optimization algorithm, later artificial neural network is used for the classification of the normal lung images from abnormal images. Finally, abnormal images will be processed through the fuzzy K-means algorithm for segmenting the tumors separately. In the second phase, SVM classifier is used for the reduction of false positives. The proposed system delivers accuracy of 96%, 100% specificity and sensitivity of 99% and it reduces false positives. Experimental results shows that the system outperforms many other systems in the literature in terms of sensitivity, specificity, and accuracy. There is a great tradeoff between effectiveness and efficiency and the proposed system also saves computation time. The work shows that the proposed system which is formed by the integration of fuzzy K-means clustering and deep learning technique is simple yet powerful and was effective in reducing false positives and segments tumors and perform classification and delivers better performance when compared to other strategies in the literature, and this system is giving accurate decision when compared to human doctor’s decision.

Przejdź do artykułu

Autorzy i Afiliacje

J. Maruthi Nagendra Prasad

S. Chakravarty

M. Vamsi Krishna

Centurion University of Technology and Management, Orissa, India
Chaitanya Engineering College, Kakinada, India

3 Dynamic semantic description and search methods for heterogeneous learning resources

Xiaocong Lai , Ying Pan , Xueling Jiang

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e139434 | DOI: 10.24425/bpasts.2021.139434

Słowa kluczowe: heterogeneous data learning resources semantic description semantic search

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Learning resources are massive, heterogeneous, and constantly changing. How to find the required resources quickly and accurately has become a very challenging work in the management and sharing of learning resources. According to the characteristics of learning resources, this paper proposes a progressive learning resource description model, which can describe dynamic heterogeneous resource information on a fine-grained level by using information extraction technology, then a semantic annotation algorithm is defined to calculate the semantic of learning resource and add these semantic to the description model. Moreover, a semantic search method is proposed to find the required resources, which calculate the content with the highest similarity to the user query, and then return the results in descending order of similarity. The simulation results show that the method is feasible and effective.

Przejdź do artykułu

Autorzy i Afiliacje

Xiaocong Lai

Ying Pan

Xueling Jiang

Guangxi Key Lab of Human-machine Interaction and Intelligent Decision, Nanning Normal University, Nanning 530001, People’s Republic of China

4 Single target tracking algorithm for lightweight Siamese networks based on global attention

Zhentao Wang , Xiaowei He , Rao Cheng

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e139961 | DOI: 10.24425/bpasts.2021.139961

Słowa kluczowe: target tracking siamese network semantic information training strategy feature fusion deep learning

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Object tracking based on Siamese networks has achieved great success in recent years, but increasingly advanced trackers are also becoming cumbersome, which will severely limit deployment on resource-constrained devices. To solve the above problems, we designed a network with the same or higher tracking performance as other lightweight models based on the SiamFC lightweight tracking model. At the same time, for the problems that the SiamFC tracking network is poor in processing similar semantic information, deformation, illumination change, and scale change, we propose a global attention module and different scale training and testing strategies to solve them. To verify the effectiveness of the proposed algorithm, this paper has done comparative experiments on the ILSVRC, OTB100, VOT2018 datasets. The experimental results show that the method proposed in this paper can significantly improve the performance of the benchmark algorithm.

Przejdź do artykułu

Autorzy i Afiliacje

Zhentao Wang

Xiaowei He

Rao Cheng

College of Mathematics and Computer Science, Zhejiang Normal University, Jinhua, Zhejiang, 321000, China

5 MFFNet: A multi-frequency feature extraction and fusion network for visual processing

Jinsheng Deng , Zhichao Zhang , Xiaoqing Yin

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e140466 | DOI: 10.24425/bpasts.2022.140466

Słowa kluczowe: deblurring multi-feature fusion deep learning attention mechanism

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Convolutional neural networks have achieved tremendous success in the areas of image processing and computer vision. However, they experience problems with low-frequency information such as semantic and category content and background color, and high-frequency information such as edge and structure. We propose an efficient and accurate deep learning framework called the multi-frequency feature extraction and fusion network (MFFNet) to perform image processing tasks such as deblurring. MFFNet is aided by edge and attention modules to restore high-frequency information and overcomes the multiscale parameter problem and the low-efficiency issue of recurrent architectures. It handles information from multiple paths and extracts features such as edges, colors, positions, and differences. Then, edge detectors and attention modules are aggregated into units to refine and learn knowledge, and efficient multi-learning features are fused into a final perception result. Experimental results indicate that the proposed framework achieves state-of-the-art deblurring performance on benchmark datasets.

Przejdź do artykułu

Autorzy i Afiliacje

Jinsheng Deng

Zhichao Zhang

Xiaoqing Yin

College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha 410000, China
College of Computer, National University of Defense Technology, Changsha 410000, China

6 Hierarchical Bi-LSTM based emotion analysis of textual data

Dashrath Mahto , Subhash Chandra Yadav

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e141001 | DOI: 10.24425/bpasts.2022.141001

Słowa kluczowe: emotion analysis machine learning emotion detection deep learning hierarchical Bi-LSTM

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Nowadays, Twitter is one of the most popular microblogging sites that is generating a massive amount of textual data. Such textual data is intended to incorporate human feelings and opinions with related events like tweets, posts, and status updates. It then becomes difficult to identify and classify the emotions from the tweets due to their restricted word length and data diversity. In contrast, emotion analysis identifies and classifies different emotions based on the text data generated from social media platforms. The underlying work anticipates an efficient category and prediction technique for analyzing different emotions from textual data collected from Twitter. The proposed research work deliberates an enhanced deep neural network (EDNN) based hierarchical Bi-LSTM model for emotion analysis from textual data; that classifies the six emotions mainly sadness, love, joy, surprise, fear, and anger. Furthermore, the emotion analysis result obtained by the proposed hierarchical Bi-LSTM model is being compared and validated with the traditional hybrid CNN-LSTM approach regarding the accuracy, recall, precision, and F1-Score. It can be observed from the results that the proposed hierarchical Bi-LSTM achieves an average accuracy of 89% for emotion analysis, whereas the existing CNN-LSTM model achieved an overall accuracy of 75%. This result shows that the proposed hierarchical Bi-LSTM approach achieves desired performance compared to the CNN-LSTM model.

Przejdź do artykułu

Autorzy i Afiliacje

Dashrath Mahto

e-mail:

ORCID:

Subhash Chandra Yadav

e-mail:

ORCID:

Department of Computer Science and Technology, Central University of Jharkhand, Ranchi, India
Department of Computer Science and Technology,Central University of Jharkhand, Ranchi, India

7 Ensemble of classifiers based on CNN for increasing generalization ability in face image recognition

Robert Szmurło , Stanislaw Osowski

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e141004 | DOI: 10.24425/bpasts.2022.141004

Słowa kluczowe: CNN ensemble of classifiers face recognition feature selection

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The paper considers the problem of increasing the generalization ability of classification systems by creating an ensemble of classifiers based on the CNN architecture. Different structures of the ensemble will be considered and compared. Deep learning fulfills an important role in the developed system. The numerical descriptors created in the last locally connected convolution layer of CNN flattened to the form of a vector, are subjected to a few different selection mechanisms. Each of them chooses the independent set of features, selected according to the applied assessment techniques. Their results are combined with three classifiers: softmax, support vector machine, and random forest of the decision tree. All of them do simultaneously the same classification task. Their results are integrated into the final verdict of the ensemble. Different forms of arrangement of the ensemble are considered and tested on the recognition of facial images. Two different databases are used in experiments. One was composed of 68 classes of greyscale images and the second of 276 classes of color images. The results of experiments have shown high improvement of class recognition resulting from the application of the properly designed ensemble.

Przejdź do artykułu

Autorzy i Afiliacje

Robert Szmurło

e-mail:

ORCID:

Stanislaw Osowski

e-mail:

ORCID:

Faculty of Electrical Engineering, Warsaw University of Technology, Koszykowa 75, 00-662 Warszawa, Poland
Faculty of Electronic Engineering, Military University of Technology, gen. S. Kaliskiego 2, 00-908 Warszawa, Poland

8 Robust zeroing neural networks with two novel power-versatile activation functions for solving dynamic Sylvester equation

Peng Zhou , Mingtao Tan

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e141307 | DOI: 10.24425/bpasts.2022.141307

Słowa kluczowe: recurrent neural network (RNN) zeroing neural network (ZNN) RZNN fixed-time convergence

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

In this work, two robust zeroing neural network (RZNN) models are presented for online fast solving of the dynamic Sylvester equation (DSE), by introducing two novel power-versatile activation functions (PVAF), respectively. Differing from most of the zeroing neural network (ZNN) models activated by recently reported activation functions (AF), both of the presented PVAF-based RZNN models can achieve predefined time convergence in noise and disturbance polluted environment. Compared with the exponential and finite-time convergent ZNN models, the most important improvement of the proposed RZNN models is their fixed-time convergence. Their effectiveness and stability are analyzed in theory and demonstrated through numerical and experimental examples.

Przejdź do artykułu

Autorzy i Afiliacje

Peng Zhou

Mingtao Tan

e-mail:

ORCID:

College of Electronic Information and Automation, Guilin University of Aerospace Technology, Guilin 541004, China
School of Computer and Electrical Engineering, Hunan University of Arts and Science, Changde 415000, China

9 Iterative learning fault-tolerant control for the networked control systems with initial state disturbance

Fu Xingjian , Zhao Qianjun

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e140934 | DOI: 10.24425/bpasts.2022.140934

Słowa kluczowe: networked control systems initial state disturbance iterative learning actuator failure fault-tolerant control

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The iterative learning fault-tolerant control strategies with non-strict repetitive initial state disturbances are studied for the linear discrete networked control systems (NCSs) and the nonlinear discrete NCSs. In order to reduce the influence of the initial state disturbance in iteration, for the linear NCSs, considering the external disturbance and actuator failure, the iterative learning fault-tolerant control strategy with impulse function is proposed. For the nonlinear NCSs, the external disturbance, packet loss and actuator failure are considered, the iterative learning fault-tolerant control strategy with random Bernoulli sequence is provided. Finally, the proposed control strategies are used for simulation research for the linear NCSs and the nonlinear NCSs. The results show that both strategies can reduce the influence of the initial state disturbance on the tracking effect, which verifies the effectiveness of the given method.

Przejdź do artykułu

Autorzy i Afiliacje

Fu Xingjian

Zhao Qianjun

School of Automation, Beijing Information Science and Technology University, Beijing 100192, China

10 Control of perishable inventory system with uncertain perishability process using neural networks and robust multicriteria optimization

Ewelina Chołodowicz , Przemysław Orłowski

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e141182 | DOI: 10.24425/bpasts.2022.141182

Słowa kluczowe: multiple objective programming optimal control genetic algorithm perishable inventories inventory control

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The inventory systems are highly variable and uncertain due to market demand instability, increased environmental impact, and perishability processes. The reduction of waste and minimization of holding and shortage costs are the main topics studied within the inventory management area. The main difficulty is the variability of perishability and other processes that occurred in inventory systems and the solution for a trade-off between sufficient inventory level and waste of products. In this paper, the approach for resolving this trade-off is proposed. The presented approach assumes the application of a state-feedback neural network controller to generate the optimal quantity of orders considering an uncertain deterioration process and the FIFO issuing policy. The development of the control system is based on state-space close loop control along with neural networks. For modelling the perishability process Weibull distribution and FIFO policy are applied. For the optimization of the designed control system, the evolutionary NSGA-II algorithm is used. The robustness of the proposed approach is provided using the minimax decision rule. The worst-case scenario of an uncertain perishability process is considered. For assessing the proposed approach, simulation research is conducted for different variants of controller structure and model parameters. We perform extensive numerical simulations in which the assessment process of obtained solutions is conducted using hypervolume indicator and average absolute deviation between results obtained for the learning and testing set. The results indicate that the proposed approach can significantly improve the performance of the perishable inventory system and provides robustness for the uncertain changes in the perishability process.

Przejdź do artykułu

Autorzy i Afiliacje

Ewelina Chołodowicz

e-mail:

ORCID:

Przemysław Orłowski

e-mail:

ORCID:

Faculty of Electrical Engineering, Department of Automation and Robotics, West Pomeranian University of Technology in Szczecin,al. Piastów 17, 70-310 Szczecin, Poland

11 Design of PI sliding mode control for Zeta DC-DC converter in PV system

Rini Nur Hasanah , Lunde Ardhenta , Tri Nurwati , Onny Setyawati , Dian Retno Sawitri , Hadi Suyono , Taufik Taufik

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e140952 | DOI: 10.24425/bpasts.2022.140952

Słowa kluczowe: photovoltaic Zeta converter sliding mode control PI sliding surface

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Solar energy has become one of the most potential alternative energies in the world. To convert solar energy into electricity, a photovoltaic (PV) system can be utilized. However, the fluctuation of sunlight intensity throughout the day greatly affects the generated energy in the PV system. A battery may be beneficial to store the generated energy for later use. A DC–DC converter is commonly exploited to produce a constant output voltage during the battery charging process. A Zeta converter is a DC–DC converter which can be used to produce output values above or below the input voltage without changing the polarity. To deal with the inherent non-linearity and time-varying properties of the converter, in this paper the sliding mode control (SMC) is first analyzed and exploited before being integrated with a proportional-integral (PI) control to regulate the output voltage of the PV system. Disturbances are given in the form of changes in input voltage, reference voltage, and load. Voltage deviation and recovery time to reach a steady-state condition of the output voltage after disturbances are investigated and compared to the results using a proportional-integral-differential (PID) controller. The results show that the proposed control design performs faster than the compared PID control method.

Przejdź do artykułu

Autorzy i Afiliacje

Rini Nur Hasanah

e-mail:

ORCID:

Lunde Ardhenta

e-mail:

ORCID:

Tri Nurwati

e-mail:

ORCID:

Onny Setyawati

Dian Retno Sawitri

Hadi Suyono

e-mail:

ORCID:

Taufik Taufik

Electrical Engineering Department, Universitas Brawijaya, Indonesia
Electrical Engineering Department, Universitas Dian Nuswantoro, Indonesia
Electrical Engineering Department, Cal Poly State University, USA

12 New stability tests for positive descriptor linear systems

Tadeusz Kaczorek

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e140688 | DOI: 10.24425/bpasts.2022.140688

Słowa kluczowe: descriptor positive continuous-time discrete-time system sufficient condition stability

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The asymptotic stability of positive descriptor continuous-time and discrete-time linear systems is considered. New sufficient conditions for stability of positive descriptor linear systems are established. The efficiency of the new stability conditions are demonstrated on numerical examples of continuous-time and discrete-time linear systems.

Przejdź do artykułu

Autorzy i Afiliacje

Tadeusz Kaczorek

e-mail: t.kaczorek@pb.edu.pl

ORCID:

Bialystok University of Technology, Faculty of Electrical Engineering, Wiejska 45D, 15-351 Bialystok, Poland

13 Preliminary research of a symmetrical controllable granular damper prototype

Anna Mackojc , Bogumil Chilinski , Robert Zalewski

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e141002 | DOI: 10.24425/bpasts.2022.141002

Słowa kluczowe: granular materials Vacuum Packed Particles Bouc-Wen model hysteresis loop experimental results model identification

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

This paper concerns the problem of empirical investigation and mathematical modelling of a novel controllable damper using vacuum packed particles. Vacuum packed particles tend to be placed among the group of so-called ‘smart structures’. The macroscopic mechanical features of such structures can be controlled by the partial vacuum parameter. The authors consider an application of Bouc-Wen model in order to represent the dynamic behaviour of the investigated device. The verification of the model response with experimental data is discussed. The Bouc-Wen model parameters identification is described.

Przejdź do artykułu

Autorzy i Afiliacje

Anna Mackojc

e-mail:

ORCID:

Bogumil Chilinski

e-mail:

ORCID:

Robert Zalewski

e-mail:

ORCID:

Institute of Machine Design Fundamentals, Warsaw University of Technology, Poland

14 Research of damage to the rear wheel rim in a tipper-truck

Przemyslaw Kubiak , Marek Wozniak , Sergiusz Zakrzewski , Krzysztof Siczek , Adam Rylski , Adam Mrowicki , Jan Matej , Jakub Deda , Lech Knap

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | No. 3 | e141000 | DOI: 10.24425/bpasts.2022.141000

Słowa kluczowe: tipper-truck rim tire failure

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Serious damage to the inner rim of the rear twin wheel in one dump truck was noted during the operation of the fleet performing transport tasks. It was a drive wheel, and its damage occurred while driving with a load exceeding the permissible value. The examination of selected fragments of the damaged rim surface was conducted visually as well as using a digital microscope with a portable head. The measurements of the Vickers hardness and microscopic observations of the material structure of the sample cut along the thickness of the rim disk were carried out. The drive torque loading of the twin wheels of the tipper-truck rear axle, under their mating with different kinds of road roughness and under various vertical loads of the wheels was calculated. An analysis of stress distributions in the rim modelled using the Finite Element Method was also conducted for several possible scenarios of wheel loading. The damage to the rim was caused by simultaneous action of several factors, such as overloading the car, poor condition of the tires, loading the drive wheel by a part of the vehicle weight and the driving torque, and hitting a wheel on a cavity in a dirt road, causing a temporary relief of one of the tires on a twin wheel.

Przejdź do artykułu

Autorzy i Afiliacje

Przemyslaw Kubiak

1 2

Marek Wozniak

Sergiusz Zakrzewski

Krzysztof Siczek

Adam Rylski

Adam Mrowicki

Jan Matej

Jakub Deda

Lech Knap

Faculty of Automotive and Construction Machinery Engineering, Warsaw University of Technology, Narbutta Str. 84, 02-524 Warsaw, Poland
Ecotechnology Team, Lodz University of Technology, Piotrkowska 266, 90-924 Lodz, Poland
Faculty of Mechanical Engineering, Lodz University of Technology, Stefanowskiego 1/15, 90-537 Lodz, Poland

15 Standalone brushless motor module optimized for legged robots

Piotr Wasilewski , Rafał Gradzki

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e141008 | DOI: 10.24425/bpasts.2022.141008

Słowa kluczowe: brushless motor quadruped robot actuator module

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The main focus of the article is an advanced actuator, designed and optimized for small dynamic legged robots. The presented actuator prototype is unique, as the market lacks similar solutions when dimensions and weight of the module are considered. The actuator has a modular structure, which makes it easy to replace in case of malfunction and simplifies the overall structure of the robot. High torque bandwidth, achieved by the module, is crucial to agile locomotion, obstacle avoidance and push recovery of the quadrupedal robot. The Authors have conducted a solution review aimed at similar small-size modules. It was found that there are no advanced actuators suitable for sub 5 kg quadruped robots. The unique design presented in this paper is described in all three aspects: mechanical, electrical and software. The mechanical section depicts the solutions implemented in the module, especially the low gear ratio gearbox. The custom brushless motor driver is presented in the electrical section, together with detailed diagrams and hardware descriptions. The last section depicts solutions implemented in the software, the main motor control algorithm and auxiliary modules such as automatic motor parameter identification and encoder misalignment correction. Tests performed in the last part of this paper validated the design goals established for the actuator. The results confirmed the high torque capability and exhibited the motor saturation region. Continuous and peak torque were measured based on the thermal characteristics of the module. Moreover, the automatic motor parameter identification process carried out by the controller itself was validated by manual measurements.

Przejdź do artykułu

Autorzy i Afiliacje

Piotr Wasilewski

Rafał Gradzki

e-mail:

ORCID:

Bialystok University of Technology, Faculty of Electrical Engineering, Wiejska 45D, 15-351 Bialystok, Poland
Bialystok University of Technology, Faculty of Mechanical Engineering, Department of Robotics and Mechatronics, Wiejska 45C, 15-351, Bialystok, Poland

16 The stress and strain distribution in X10CrMoVNb9-1 power engineering steel after long time degradation studied by the ESPI system

Mateusz Kopec

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e141181 | DOI: 10.24425/bpasts.2022.141181

Słowa kluczowe: damage P91 steel electronic speckle pattern interferometry (ESPI) optical measurements

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Maintenance of assets and equipment in power plants is essential for their safety and is required to help the plant stay active. In this paper, the specimens manufactured from a pipe of X10CrMoVNb9-1 (P91) power engineering steel in the as-received state and after operating for 80000 h at internal pressure of 8.4 MPa and temperature of 540ºC were subjected to tests using electronic speckle pattern interferometry (ESPI) under static loading of up to 2.5 kN. Such a procedure enables assessment of strain and stress distribution maps to compare material integrity in the as-received state and after exploitation in its elastic range. The measurements conducted showed no effect of long time operation on the mechanical response of P91 steel under the power installations conditions since the field strain distributions for each type of specimen were found to be similar.

Przejdź do artykułu

Autorzy i Afiliacje

Mateusz Kopec

1 2

e-mail:

ORCID:

Institute of Fundamental Technological Research, Polish Academy of Sciences, Pawińskiego 5B, 02-106 Warsaw, Poland
Department of Mechanical Engineering, Imperial College London, London SW7 2AZ, UK

17 Nonlinear magnetic circuit – self inductance definitions, passivity and waveforms distortion

Dariusz Spałek

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e141003 | DOI: 10.24425/bpasts.2022.141003

Słowa kluczowe: generalized magnetizing curve nonlinear magnetic circuits self inductance definitions passivity Fourier harmonics of distorted waveforms

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The generalized magnetizing curve series for the nonlinear magnetic circuit is proposed. Subsequently, three definitions of selfinductance for the nonlinear magnetic circuit are compared. The passivity of the magnetic circuit is reconsidered. Three theorems that describe features of Fourier harmonics of distorted waveforms have been proved.

Przejdź do artykułu

Autorzy i Afiliacje

Dariusz Spałek

e-mail:

ORCID:

Silesian University of Technology, Electrical Engineering Faculty, Akademicka 10, 44-100 Gliwice Poland

18 Effective lattice structures for separable two-dimensional orthogonal wavelet transforms

Dariusz Puchala

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e141005 | DOI: 10.24425/bpasts.2022.141005

Słowa kluczowe: two-dimensional orthogonal discrete wavelet transform lattice structures image processing VLSI circuits

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Discrete two-dimensional orthogonal wavelet transforms find applications in many areas of analysis and processing of digital images. In a typical scenario the separability of two-dimensional wavelet transforms is assumed and all calculations follow the row-column approach using one-dimensional transforms. For the calculation of one-dimensional transforms the lattice structures, which can be characterized by high computational efficiency and non-redundant parametrization, are often used. In this paper we show that the row-column approach can be excessive in the number of multiplications and rotations. Moreover, we propose the novel approach based on natively two-dimensional base operators which allows for significant reduction in the number of elementary operations, i.e., more than twofold reduction in the number of multiplications and fourfold reduction of rotations. The additional computational costs that arise instead include an increase in the number of additions, and introduction of bit-shift operations. It should be noted, that such operations are significantly less demanding in hardware realizations than multiplications and rotations. The performed experimental analysis proves the practical effectiveness of the proposed approach.

Przejdź do artykułu

Autorzy i Afiliacje

Dariusz Puchala

e-mail:

ORCID:

Institute of Information Technology, Technical University of Lodz, Poland

19 Power quality analysis in electrical drives and a case study of artificial intelligence prediction algorithm for fault deterrent electrical drives

Vishnu Murthy K. , Ashok Kumar L.

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e141180 | DOI: 10.24425/bpasts.2022.141180

Słowa kluczowe: voltage sag/swell voltage imbalance machine learning inverter drives artificial intelligence

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Since electrical drives have become an integral element of any industrial sector, power quality difficulties have been well expected, and delivering genuine quality of the same has proven to be a difficult challenge. Since power quality relies on load side non-linearity and high semiconductor technology consumption, it is a serious concern. The efficiency of the drive segment employed in the sector is increasingly becoming a topic of discussion in today’s market. Numerous reviews of available literature have found problems with the load side as well as with electrical drive proficiency, as a result of the issues listed above. A high level of power quality vulnerability is simply too much. Even the most advanced technology has its limits when it comes to drive operation. Research on the grid-side quality issues of electrical drives is the focus of this article. After field testing of grid power quality, each parametric analysis is performed to identify crucial parameters that can cause industrial drives to fail. Based on this discovery, a machine learning strategy was developed and an artificial intelligence technique was proposed to administer the fault deterrent prediction algorithm. An accurate forecast of anomalous behavior on the grid side ensures safe and dependable grid operation such that shutdown or failure probability is minimized to a greater extent by the results. Additional information gleaned from historical data will prove useful to equipment manufacturers in the future, providing a solution to this problem.

Przejdź do artykułu

Autorzy i Afiliacje

Vishnu Murthy K.

e-mail:

ORCID:

Ashok Kumar L.

e-mail:

ORCID:

Department of Electrical and Electronics Engineering, PSG College of Technology, Coimbatore, Tamilnadu, India

20 The thermal characteristics of ACCR lines as a function of wind speed – an analytical approach

Marek Zaręba , Jerzy Gołębiowski

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e141006 | DOI: 10.24425/bpasts.2022.141006

Słowa kluczowe: wind speed transient and steady temperature field ACCR line mathematical modeling

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The paper has investigated the effect of wind speed on selected thermal characteristics of the contemporary ACCR line. As wind speed functions, heating curves, stationary temperature profiles, steady-state current ratings and thermal time constants, have been determined. The composite core (Al–Al2O3) and the Al–Zr alloy braid were modeled as porous solids. As a result, the physical model is composed of a solid cylinder and a hollow cylinder with different material parameters of the above-mentioned elements. The mathematical model was formulated as the boundary-initial problem of the parabolic heat equation. The problem was solved by the state-superposition of and variable-separation method. On this basis, a computer program was developed in the Mathematica 10.4 environment and the velocity characteristics sought for were plotted. The results obtained analytically were positively verified by the finite-element method in the NISA v.16 environment. The physical interpretation of the determined characteristics has been given.

Przejdź do artykułu

Autorzy i Afiliacje

Marek Zaręba

Jerzy Gołębiowski

Faculty of Electrical Engineering, Bialystok University of Technology, ul. Wiejska 45D, 15-351 Białystok, Poland

21 Automatic pavement macrotexture depth calculation using a statistical approach based on the tire/road noise signal by directional microphones

Hao Liu , Yiying Zhang , Zhengwei Xu , Xiaojiang Liu

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e140519 | DOI: 10.24425/bpasts.2022.140519

Słowa kluczowe: statistical approach directional microphone pavement macrotexture depth automation

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

This paper develops an automatic method to calculate the macrotexture depth of pavement roads, using the tire/road noise data collected by the two directional microphones mounted underneath a moving test vehicle. The directional microphones collect valid tire/road noise signal at the travel speed of 10–110 km/h, and the sampling frequency is 50 kHz. The tire/road noise signal carries significant amount of road surface information, such as macrotexture depth. Using bandpass filter, principal component analysis, speed effect elimination, Gaussian mixture model, and reversible jump Markov Chain Monte Carlo, the macrotexture depth of pavement roads can be calculated from the tire/road noise data, automatically and efficiently. Compared to the macrotexture depth results by the sand-patch method and laser profiler, the acoustic method has been successfully demonstrated in engineering applications for the accurate results of macrotexture depth with excellent repeatability, at the test vehicle’s travel speed of 10-110 km/h.

Przejdź do artykułu

Autorzy i Afiliacje

Hao Liu

Yiying Zhang

Zhengwei Xu

Xiaojiang Liu

China Merchants Chongqing Communications Technology Research & Design Institute Co., Ltd, 33 Xuefu Road, Nan’an District, Chongqing, PR China, 400067
China Merchants Roadway Information Technology (Chongqing) Co., Ltd, 33 Xuefu Road, Nan’an District, Chongqing, PR China, 400067

22 Thermoelectric properties of bismuth-doped magnesium silicide obtained by the self-propagating high-temperature synthesis

Bartosz Bucholc , Kamil Kaszyca , Piotr Śpiewak , Krzysztof Mars , Mirosław J. Kruszewski , Łukasz Ciupiński , Krystian Kowiorski , Rafał Zybała

Bulletin of the Polish Academy of Sciences Technical Sciences | 2022 | 70 | 3 | e141007 | DOI: 10.24425/bpasts.2022.141007

Słowa kluczowe: thermoelectric materials magnesium silicide bismuth doping SHS synthesis spark plasma sintering

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Doping is one of the possible ways to significantly increase the thermoelectric properties of many different materials. It has been confirmed that by introducing bismuth atoms into Mg sites in the Mg2Si compound, it is possible to increase career concentration and intensify the effect of phonon scattering, which results in remarkable enhancement in the figure of merit (ZT) value. Magnesium silicide has gained scientists’ attention due to its nontoxicity, low density, and inexpensiveness. This paper reports on our latest attempt to employ ultrafast selfpropagating high-temperature synthesis (SHS) followed by the spark plasma sintering (SPS) as a synthesis process of doped Mg2Si. Materials with varied bismuth doping were fabricated and then thoroughly analyzed with the laser flash method (LFA), X-ray diffraction (XRD), scanning electron microscopy (SEM) with an integrated energy-dispersive spectrometer (EDS). For density measurement, the Archimedes method was used. The electrical conductivity was measured using a standard four-probe method. The Seebeck coefficient was calculated from measured Seebeck voltage in the sample subjected to a temperature gradient. The structural analyses showed the Mg2Si phase as dominant and Bi2Mg3 located at grain boundaries. Bismuth doping enhanced ZT for every dopant concentration. ZT = 0:44 and ZT=0.38 were obtained for 3wt% and 2wt% at 770 K, respectively.

Przejdź do artykułu

Autorzy i Afiliacje

Bartosz Bucholc

e-mail:

ORCID:

Kamil Kaszyca

e-mail:

ORCID:

Piotr Śpiewak

e-mail:

ORCID:

Krzysztof Mars

e-mail:

ORCID:

Mirosław J. Kruszewski

e-mail:

ORCID:

Łukasz Ciupiński

e-mail:

ORCID:

Krystian Kowiorski

e-mail:

ORCID:

Rafał Zybała

1 2

e-mail:

ORCID:

Łukasiewicz Research Network - Institute of Microelectronics and Photonics, Aleja Lotników 32/46, 02-668 Warsaw, Poland
Faculty of Materials Science and Engineering, Warsaw University of Technology, Wołoska 141, 02-507 Warsaw, Poland
Faculty of Materials Science and Ceramic, AGH University of Science and Technology, Kraków, Al. Mickiewicza 30, 30-059, Poland

Instrukcja dla autorów

Guide for Authors

https://www.editorialsystem.com/bpasts/journal/for_authors/

As of January 1st, 2025, there are changes in the fees for open access publications in Bulletin of the Polish Academy of Sciences Technical Sciences: 2000 PLN (approx. 500 EUR) - up to 8 pages of the journal format and mandatory over-length charges of 250 PLN (approx. 60 EUR) per page (see the above link with instructions for Authors for details)

Guide for Reviewers

https://www.editorialsystem.com/bpasts/journal/for_reviewers/

Call for Papers

https://www.editorialsystem.com/bpasts/journal/call_for_papers/

Guide for Guest Editors

https://www.editorialsystem.com/editor/bpasts/journal/page1/

Dodatkowe informacje

NEW PUBLICATION FEES
Articles submitted by December 31st, 2024: existing fee: 1500 PLN (and mandatory over-length charges of 230 PLN per page)
Articles submitted from January 1st, 2025: new fee: 2000 PLN (approx. 500 EUR- depending on the exchange rate) - a flat fee per paper up to 8 pages of the journal format (each additional page will be charged an additional 250 PLN).