@ARTICLE{Helowicz_Andrzej_Measurement_2024,
 author={Helowicz, Andrzej},
 volume={vol. 70},
 number={No 3},
 journal={Archives of Civil Engineering},
 pages={225-239},
 howpublished={online},
 year={2024},
 publisher={WARSAW UNIVERSITY OF TECHNOLOGY FACULTY OF CIVIL ENGINEERING and COMMITTEE FOR CIVIL ENGINEERING POLISH ACADEMY OF SCIENCES},
 abstract={This paper describes the author’s method for the direct and continuous measurement of the temperature distribution during the initial period of hardening concrete, together with the results of tests obtained with its use. The first successful test using this method was conducted by the author in May 2001 [7]. In the following years, the author successfully used this method in the study of other structural elements [8] and [9]. He independently developed and made the necessary elements to measure the temperature in hardening concrete. The tested element is a reinforced concrete column with a diameter of 2.0 m and a height of 8.0 m, which is an intermediate support for the flyover under construction along the Wrocław city ring road. The structure consists of two independent continuous 15-span structures made of pre-stressed concrete (Fig. 1). The article additionally presents numerical model of the previously tested reinforced concrete pillar and the calculation results obtained. The numerical calculations were carried out using the Abaqus FEA software [1]. In conclusions, the author summarises the important elements of the on-site test and makes recommendations for further use of this method to predict the temperature distribution in other elements of the structure, provided that they are made of exactly the same concrete mixture.},
 type={Article},
 title={Measurement and modelling of the temperature distribution caused by the heat of cement hydration},
 URL={http://journals.pan.pl/Content/132734/14_2k.pdf},
 doi={10.24425/ace.2024.150980},
 keywords={mass concrete, cement, measurement and modelling, heat generated by cement hydration},
}