@ARTICLE{Krawczyk_J._The_2018, author={Krawczyk, J. and Rożniata, E. and Zimowski, S. and Kot, M. and Dądrowski, R. and Dziurka, R. and Frocisz, Ł.}, volume={vol. 63}, number={No 2}, journal={Archives of Metallurgy and Materials}, howpublished={online}, year={2018}, publisher={Institute of Metallurgy and Materials Science of Polish Academy of Sciences}, publisher={Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences}, abstract={The present paper describe the issue of tool materials wear in a high temperature conditions. The investigations were performed at the cast steel tool material at the tribological contact to the structural steel. The investigations aim was to determine the role of microstructure in a tribological properties between the structural steel and tool material. The results of such investigation could be referenced to the industry conditions and could answer about the problems of tool materials wear. The observations of the wear mechanisms were referred to the microstructure of the mill rolls. The laboratory tests ware aimed at evaluating the thermal treatment modification effect on the cast steels properties. A significant role of the morphology of ledeburitic cementite and secondary cementite on the tribological properties was exhibited. The investigations assumed the presence of an austenitic matrix with primary and secondary cementite. Influence of varying morphology carbides was described. in the cast steel microstructure. The investigation results make possible to point to a direction of carbide morphology change with the purpose of obtaining the assumed properties of hot operation tools.}, type={Artykuły / Articles}, title={The Role of Microstructure in High Temperature Tribology of Iron Alloys}, URL={http://journals.pan.pl/Content/106702/PDF/AMM-2018-2-48-Krawczyk.pdf}, doi={10.24425/122422}, keywords={microstructure, tribology, iron alloys, cast steel, wear, cementite}, }