@ARTICLE{Bałdyga_Jerzy_Effect_2018, author={Bałdyga, Jerzy and Jasińska, Magdalena and Dzięgielewska, Magdalena and Żochowska, Monika}, volume={vol. 39}, number={No 4}, journal={Chemical and Process Engineering}, pages={475–489}, howpublished={online}, year={2018}, publisher={Polish Academy of Sciences Committee of Chemical and Process Engineering}, abstract={The measured rate of release of intercellular protein from yeast cells by ultrasonication was applied for evaluating the effects of sonication reactor geometry on cell disruption rate and for validation of the simulation method. Disintegration of two strains of Saccharomyces cerevisiae has been investigated experimentally using a batch sonication reactor equipped with a horn type sonicator and an ultrasonic processor operating at the ultrasound frequency of 20 kHz. The results have shown that the rate of release of protein is directly proportional to the frequency of the emitter surface and the square of the amplitude of oscillations and strongly depends on the sonication reactor geometry. The model based on the Helmholtz equation has been used to predict spatial distribution of acoustic pressure in the sonication reactor. Effects of suspension volume, horn tip position, vessel diameter and amplitude of ultrasound waves on the spatial distribution of pressure amplitude have been simulated. A strong correlation between the rate of protein release and the magnitude of acoustic pressure and its spatial distribution has been observed. This shows that modeling of acoustic pressure is useful for optimization of sonication reactor geometry.}, type={Artykuły / Articles}, title={Effect of sonication reactor geometry on cell disruption and protein release from yeast cells}, URL={http://journals.pan.pl/Content/109017/PDF/art10_CPE-39-4_INTERNET.pdf}, doi={10.24425/cpe.2018.124973}, keywords={cell disruption, protein release, Saccharomyces cerevisiae, ultrasonication, yeast}, }