@ARTICLE{Piękoś_M._Investigations_2019, author={Piękoś, M. and Zych, J.}, volume={vol. 19}, number={No 1}, journal={Archives of Foundry Engineering}, pages={127-132}, howpublished={online}, year={2019}, publisher={The Katowice Branch of the Polish Academy of Sciences}, abstract={The influence of the chill on the AlSi7Mg alloy properties after the heat treatment T6, was realised in the system of the horizontally cast plate of dimensions 160x240 mm and thickness of 10 and 15 m. The cooling course in individual casting zones was recorded, which allowed to determine the solidification rate. Castings were subjected to the heat treatment T6 process. Several properties of the alloy such as: hardness BHN, density, tensile strength UTS, elongation %E were determined. The microstructure images were presented and the structural SDAS parameter determined. The performed investigations as well as the analysis of the results allowed to determine the influence zone of the chill. The research shows that there is a certain dependence between the thickness of the casting wall and the influence zone of the chill, being not less than 2g, where g is the casting wall thickness. The next aim of successive investigations will be finding the confirmation that there is the dependence between the casting wall thickness and the influence zone of the chill for other thicknesses of walls. We would like to prove that this principle is of a universal character.}, type={Artykuły / Articles}, title={Investigations of the Influence of the Zone of Chills on the Casting Made of AlSi7Mg Alloy with Various Wall Thicknesses}, URL={http://journals.pan.pl/Content/110904/PDF/AFE%201_2019_20.pdf}, doi={10.24425/afe.2019.127106}, keywords={mechanical properties, Thermal characteristics, Cooling rate, Chills, AlSi7Mg alloy}, }