@ARTICLE{Cho_Ju-Young_Effect_2021, author={Cho, Ju-Young and Song, Myung-Suk and Choa, Yong-Ho and Kim, Taek-Soo}, volume={vol. 66}, number={No 4}, journal={Archives of Metallurgy and Materials}, pages={955-958}, howpublished={online}, year={2021}, publisher={Institute of Metallurgy and Materials Science of Polish Academy of Sciences}, publisher={Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences}, abstract={To form the fine micro-structures, the Pr17Fe78B5 magnet powders were produced in the optimized gas atomization conditions and it was investigated that the formation of the textures, microstructures, and the changes in the magnetic properties with increasing the deformation temperatures and rolling directions. Due to the rapid cooling system than the casting process, the homogenous microstructures were composed of the Pr-rich and Pr2Fe14B without any oxides and α-Fe and enables grain refinement. The pore ratios were 2.87, 1.42, and 0.22% at the deformation temperatures of 600, 700, 800°C, respectively in the rolled samples to align the c-axis which is the magnetic easy axis. Because Pr-rich phase cannot flow into the pore with a liquid state at low temperature, the improvement of pore densification was gradually observed with increasing deformation temperature. To confirm the magnetic decoupling effects of Pr2Fe14B phases by Pr-rich phases, the magnetic properties were investigated in rolled samples produced at the deformation temperature of 800°C. Although the remanent field is slightly decreased by 30%, the coercivity fields increased by about 2 times than that previous casted ingot. It is suggested that the gas atomization method can be suitable for fabricating grain refined and pure PrFeB magnets, and the plastic deformation conditions and rolling directions are a critical role to manipulate microstructure and magnetic properties.}, type={Article}, title={Effect of Deformation Temperature on the Magnetic Properties of PrFeB Alloy Fabricated by Gas Atomization}, URL={http://journals.pan.pl/Content/119277/PDF/AMM-2021-4-06-Taek-Soo%20Kim.pdf}, doi={10.24425/amm.2021.136404}, keywords={PrFeB alloy, Gas atomization, plastic deformation, Rolling, REFeB magnet}, }