@ARTICLE{Chicet_D._Comparative_2022, author={Chicet, D. and Toma, S. and Haraga, R. and Bejinariu, C.}, volume={vol. 67}, number={No 3}, journal={Archives of Metallurgy and Materials}, pages={869-878}, howpublished={online}, year={2022}, publisher={Institute of Metallurgy and Materials Science of Polish Academy of Sciences}, publisher={Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences}, abstract={In this study we analyzed the rolling contact fatigue behavior of two types of coatings made by thermal coating, by the method of atmospheric plasma spraying (APS) from two commercially available powders: Ni5Al5Mo and Al2O3 – 13 TiO2. The contact fatigue behavior was studied on an installation specially designed. The specimens were tested for 54 hours (at 1380 rpm), at a load of 944 N. For both types of coatings, the appearance of a wear path was observed, much more obvious in the case of the Ni matrix layer, also confirmed by profilometry. The mechanism of the wear phenomenon was predominantly of plastic deformation type (the material was pushed towards the edges of the wear path) in the case of NiAlMo coating. In the case of ceramic coating, the wear path width was very small (300-450 μm), with very few changes at the surface level of the coating, which recommends this type of material for applications that require wear resistance to rolling.}, type={Article}, title={Comparative Rolling Contact Behavior of Two APS Coatings with Different Matrix}, URL={http://journals.pan.pl/Content/124009/PDF-MASTER/AMM-2022-3-08-Toma.pdf}, doi={10.24425/amm.2022.139677}, keywords={Rolling Contact Fatigue, Atmospheric Plasma Spray, Wear Path Microstructure}, }