@ARTICLE{Perzyk_M._Optimization_2015, author={Perzyk, M. and Kozlowski, J. and Mazur, M. and Szymczewski, K.}, number={No 1}, journal={Archives of Foundry Engineering}, howpublished={online}, year={2015}, publisher={The Katowice Branch of the Polish Academy of Sciences}, abstract={Simulation software can be used not only for checking the correctness of a particular design but also for finding rules which could be used in majority of future designs. In the present work the recommendations for optimal distance between a side feeder and a casting wall were formulated. The shrinkage problems with application of side feeders may arise from overheating of the moulding sand layer between casting wall and the feeder in case the neck is too short as well as formation of a hot spot at the junction of the neck and the casting. A large number of simulations using commercial software were carried out, in which the main independent variables were: the feeder’s neck length, type and geometry of the feeder, as well as geometry and material of the casting. It was found that the shrinkage defects do not appear for tubular castings, whereas for flat walled castings the neck length and the feeders’ geometry are important parameters to be set properly in order to avoid the shrinkage defects. The rules for optimal lengths were found using the Rough Sets Theory approach, separately for traditional and exothermic feeders.}, type={Artykuły / Articles}, title={Optimization of Side Feeders Systems by Means of Simulation of Solidification}, URL={http://journals.pan.pl/Content/88415/PDF/12_paper.pdf}, doi={10.1515/afe-2015-0012}, keywords={solidification process, Castings defects, Side feeders, Simulation, Design rules}, }