TY - JOUR N2 - The paper presents the results of the application of a statistical analysis to evaluate the effect of the chemical composition of the die casting Al-Si alloys on its basic mechanical properties. The examinations were performed on the hypoeutectic Al-Si alloy type EN AC-46000 and, created on its basis, a multi-component Al-Si alloy containing high-melting additions Cr, Mo, W and V. The additions were introduced into the base Al-Si alloy in different combinations and amounts (from 0,05% to 0,50%). The tensile strength Rm; the proof stress Rp0,2; the unit elongation A and the hardness HB of the examined Al-Si alloys were determined. The data analysis and the selection of Al-Si alloy samples without the Cr, Mo, W and V additions were presented; a database containing the independent variables (Al-Si alloy's chemical composition) and dependent variables (Rm; Rp0,2; A and HB) for all the considered variants of Al-Si alloy composition was constructed. Additionally, an analysis was made of the effect of the Al-Si alloy's component elements on the obtained mechanical properties, with a special consideration of the high-melting additions Cr, Mo, V and W. For the optimization of the content of these additions in the Al-Si alloy, the dependent variables were standardized and treated jointly. The statistical tools were mainly the multivariate backward stepwise regression and linear correlation analysis and the analysis of variance ANOVA. The statistical analysis showed that the most advantageous effect on the jointly treated mechanical properties is obtained with the amount of the Cr, Mo, V and W additions of 0,05 to 0,10%. L1 - http://journals.pan.pl/Content/103399/PDF/AFE%201_2018_37.pdf L2 - http://journals.pan.pl/Content/103399 PY - 2018 IS - No 1 KW - mechanical properties KW - Statistical methods KW - Multi-component Al-Si alloys KW - Pressure die casting A1 - Szymszal, J. A1 - Gumienny, G. A1 - Szymczak, T. PB - The Katowice Branch of the Polish Academy of Sciences VL - vol.18 DA - 2018.03.20 T1 - Statistical Methods Used in the Assessment of the Influence of the Al-Si Alloy's Chemical Composition on its Properties UR - http://journals.pan.pl/dlibra/publication/edition/103399 T2 - Archives of Foundry Engineering ER -