TY - JOUR N2 - The paper presents the analysis of temperature fields, phase transformations, strains and stresses in a cuboidal element made from S235 steel, surfaced with multipass GMA (Gas Metal Arc) method. The temperature field is described assuming a dualdistribution heat source model and summing up the temperature fields induced by the padded weld and by the electric arc. Dependence of stresses on strains is assumed on the basis of tensile curves of particular structures, taking into account the influence of temperature. The calculations were carried out on the example of five welds in the middle of the plate made of S235 steel. The simulation results are illustrated in graphs of thermal cycles, volume shares of structural components and stresses at the selected points of cross-section, and the temperature and strain distributions in the whole cross section. L1 - http://journals.pan.pl/Content/109126/PDF-MASTER/pan_doi_blank.pdf L2 - http://journals.pan.pl/Content/109126 PY - 2018 IS - No 4 EP - 1628 DO - 10.24425/amm.2018.125085 KW - temperature field KW - phase transformation KW - Gas Metal Arc Weld surfacing A1 - Winczek, J. PB - Institute of Metallurgy and Materials Science of Polish Academy of Sciences PB - Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences VL - vol. 63 DA - 2018.12.12 T1 - The Analysis of Thermomechanical States in Multipass Arc Weld Surfaced Steel Elements SP - 1615 UR - http://journals.pan.pl/dlibra/publication/edition/109126 T2 - Archives of Metallurgy and Materials ER -