TY - JOUR N2 - The article presents tests results of the influence of deformation methods on the microstructure and properties of alloy WE43. There were direct extrusion tests and extrusion with KoBo method performed. An assessment of the influence of the methods of deformation on the microstructure and the mechanical properties of the achieved rods from alloy WE43 was conducted. There was an analysis of microstructure carried out with the use of light and scanning microscopy techniques in the initial state and after plastic deformation. Static tensile test was conducted in temperature of 350°C at a speed of 0.0001 m·s–1 and microhardness measurements were performed of HV0.2. On the basis of the achieved mechanical tests results it was stated that in the temperature of 350°C for samples deformed with the use of KoBo method there was an effect of superplastic flow found. The value of elongation achieved was 250% which was 3 times higher than in case of classic extrusion (80%). L1 - http://journals.pan.pl/Content/109173/PDF/AMM-2018-4-54-Bednarczyk.pdf L2 - http://journals.pan.pl/Content/109173 PY - 2018 IS - No 4 EP - 1980 DO - 10.24425/amm.2018.125132 KW - magnesium alloys KW - SPD method KW - microstructure KW - static tensile test A1 - Bednarczyk, I. A1 - Kuc, D. A1 - Tkocz, M. A1 - Tomaszewska, A. PB - Institute of Metallurgy and Materials Science of Polish Academy of Sciences PB - Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences VL - vol. 63 DA - 2018.12.12 T1 - The Influence of Deformation Method on the Microstructure and Properties of Magnesium Alloy WE43 SP - 1975 UR - http://journals.pan.pl/dlibra/publication/edition/109173 T2 - Archives of Metallurgy and Materials ER -