TY - JOUR N2 - The article presents the results of investigation of ultra-strength nanostructured bainitic steel Fe-0.6%C-1.9%Mn-1.8%Si-1.3%Cr-0.7%Mo (in wt. %) subjected to shear and uniaxial compression under high strain rate loading. Steel of microstructure consisted of carbide-free bainite and carbon enriched retained austenite presents a perfect balance of mechanical properties especially strength to toughness ratio. Two retained austenite morphologies exist which controlled ductility of the steel: film between bainite laths and separated blocks. It is well established that the strain induced transformation of carbon enriched retained austenite to martensite takes place during deformation. Shear localisation has been found to be an important and often dominant deformation and fracture mode in high-strength steels at high strain rate. Deformation tests were carried out using Gleeble simulator and Split Hopkinson Pressure Bar. Shear and compression strength were determined and toughness and crack resistance were assessed. Susceptibility of nanostructured bainitic steel to the formation of adiabatic shear bands (ASBs) and conditions of the bands formation were analysed. The results suggest that the main mechanism of hardening and failure at the dynamic shearing is local retained austenite transformation to high-carbon martensite which preceded ASBs formation. In the area of strain localization retained austenite transformed to fresh martensite and then steel capability to deformation and strengthening decreases. L1 - http://journals.pan.pl/Content/113036/PDF/AMM-2019-3-55-Marcisz.pdf L2 - http://journals.pan.pl/Content/113036 PY - 2019 IS - No 3 EP - 1162 DO - 10.24425/amm.2019.129508 KW - nanostructured bainitic steel KW - high strain rate material properties KW - adiabatic shear bands KW - shear energy A1 - Marcisz, J. A1 - Janiszewski, J. PB - Institute of Metallurgy and Materials Science of Polish Academy of Sciences PB - Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences VL - vol. 64 DA - 2019.09.03 T1 - Mechanical Behaviour of Nanostructured Bainitic Steel Under High Strain Rate Shear and Compression Loading SP - 1151 UR - http://journals.pan.pl/dlibra/publication/edition/113036 T2 - Archives of Metallurgy and Materials ER -