TY - JOUR N2 - The addition of hard ceramic particles of nc-(Ti,Mo)C in carbon network into Ti matrix has been proved to be an efficient way to enhance their properties. The purpose of this work was to analyze the corrosion, tribological, mechanical and morphological effects of combining nc-(Ti,Mo)C/C with titanium metal, to create a unique composite via selective laser melting technique (SLM). Composites with different weight percentage (5, 10 and 20 wt %) of ceramic phase were produced. The samples of pure Ti and Ti-6Al-4V alloy were also tested, as a reference. These composites were examined for corrosion resistance in body fluid (artificial saliva solution). Moreover, the properties of titanium composites reinforced with nc-TiC powders were compared. It was stated that mechanical properties were significantly improved with increasing amount of nc-(Ti,Mo)C/C in Ti matrix. In terms of corrosion resistance, the composites showed worse properties compared to pure titanium and Ti-6Al-4V alloy, but better than TiC-reinforced composites. L1 - http://journals.pan.pl/Content/113623/PDF/AMM-2019-4-54-Figiel.pdf L2 - http://journals.pan.pl/Content/113623 PY - 2019 IS - No 4 EP - 1625 DO - 10.24425/amm.2019.130135 KW - nanocomposites KW - TiMCs KW - SLM KW - (Ti,Mo)C A1 - Figiel, P. A1 - Biedunkiewicz, A. A1 - Biedunkiewicz, W. A1 - Grzesiak, D. A1 - Pawlyta, M. PB - Institute of Metallurgy and Materials Science of Polish Academy of Sciences PB - Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences VL - vol. 64 DA - 2019.12.12 T1 - Corrosion Characteristics of Composites of (Mo,Ti)C Tiand TiC/Ti Type Manufactured with SLM technique SP - 1617 UR - http://journals.pan.pl/dlibra/publication/edition/113623 T2 - Archives of Metallurgy and Materials ER -