TY - JOUR N2 - The paper reports the results of a physical modelling study of the production of a hypereutectic aluminium alloy to be used for making an alloy vapour source for operation in the magnetron. Within the study, targets from a hypereutectic aluminium-silicon alloy were made in laboratory conditions. Thus obtained material was subjected to heat treatment, porosity analysis, and the assessment of the microstructure and fitness for being used in the magnetron. The process of melting the hypereutectic Al-Si alloy was carried out at the Department of Foundry of the Czestochowa University of Technology. The investigation into the production of the alloy vapour source for the synthesis of the dielectric material from the hypereutectic aluminium alloy has confirmed. L1 - http://journals.pan.pl/Content/114522/PDF/AMM-2020-1-25-Nadolski.pdf L2 - http://journals.pan.pl/Content/114522 PY - 2020 IS - No 1 EP - 206 DO - 10.24425/amm.2019.131115 KW - aluminum-silicon alloy KW - magnetron sputtering processes KW - gravity casting KW - die casting A1 - Nadolski, M. A1 - Stradomski, G. A1 - Zdunek, K. A1 - Okrasa, S. PB - Institute of Metallurgy and Materials Science of Polish Academy of Sciences PB - Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences VL - vol. 65 DA - 2020.03.11 T1 - Physical Modelling of the Production of an Alloy Vapour Source for the Synthesis of Dielectric Material SP - 201 UR - http://journals.pan.pl/dlibra/publication/edition/114522 T2 - Archives of Metallurgy and Materials ER -