TY - JOUR N2 - The article has presented the method of 3D Digital Light Processing printing as one of the technologies used for rapid prototyping of dental models and making elements of dentures. In this work the research was presented, which the aim was to determine the effect of additional exposure time on the properties of the obtained printouts. Dynamic Mechanical Analysis test showed significant differences in stiffness between uncured specimens as well as specimens cured for 10, 20 and 30 minutes. In turn the obtained TG and DTG curves allowed to determine the most optimal curing time for DLP printouts. These studies provide the basis for determining the most appropriate method for handling printouts after the process of printing from liquid resin, so that they are the best possible quality for dentists and prosthodontists. L1 - http://journals.pan.pl/Content/118795/PDF/AMM-2021-2-09-Redutko.pdf L2 - http://journals.pan.pl/Content/118795 PY - 2021 IS - No 2 EP - 424 DO - 10.24425/amm.2021.135873 KW - Digital Light Processing KW - dental models KW - light-cured resin KW - DMA KW - STA A1 - Redutko, J. A1 - Kalwik, A. A1 - Szarek, A. PB - Institute of Metallurgy and Materials Science of Polish Academy of Sciences PB - Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences VL - vol. 66 DA - 2021.05.13 T1 - Influence of Curing Time on Properties of Dental Photosensitive Resin Applied in DLP Technique of 3D Printing SP - 419 UR - http://journals.pan.pl/dlibra/publication/edition/118795 T2 - Archives of Metallurgy and Materials ER -