TY - JOUR N2 - Sand Casting process depends mainly on properties of the green sand mould, sand casting requires requires producing green sand mould without failure and breakage during separation the mould from the model, transportation and handling. Production of the green sand mould corresponding to dimensions and form of the desired model without troubles depends on the properties of the green sand. Ratio of constituents, preparation method of the green sand, mixing and pressing processes determine properties of green sand. In the present work, study effect of the moulding parameters of bentonite content, mixing time, and compactability percentage on the properties of the green sand mould have been investigated. Design of experiments through Taguchi method was used to evaluate properties of permeability, compressive strength, and tensile strength of the green sand. It was found that 47% of compactability, 9(min) of mixing time, and 6% of bentonite content gives highest values of these properties simultaneously. L1 - http://journals.pan.pl/Content/127005/PDF/AFE%202_2023_01_final%20version.pdf L2 - http://journals.pan.pl/Content/127005 PY - 2023 IS - No 2 EP - 9 DO - 10.24425/afe.2023.144288 KW - Green sand KW - Compactability KW - Tensile strength KW - Permeability KW - Taguchi method A1 - Abdulamer, Dheya PB - The Katowice Branch of the Polish Academy of Sciences VL - vol. 23 DA - 2023.04.28 T1 - Impact of the Different Moulding Parameters on Properties of the Green Sand Mould SP - 5 UR - http://journals.pan.pl/dlibra/publication/edition/127005 T2 - Archives of Foundry Engineering ER -