TY - JOUR N2 - The study consisted in assessing the influence of surface and volume modification on the characteristics of high-temperature creep of castings made of waste products of nickel-based superalloys IN 713C and the MAR-247. The results of high-temperature creep tests performed under conditions of two variants of research were analysed. The characteristics of creep according to variant I were obtained on the basis of earlier studies of these alloys with the parameters T=982o C, σ=150MPa [1]. Variant II included carrying out creep tests of alloy IN713C with the parameters T=760o C, σ =400MPa and alloy MAR247 with the parameters: T=982o C, σ=200MPa.Developed creep characteristics were compared with the results of these alloys with the parameters according to variant I of the study. It was observed that the conditions of experiments carried out depending upon the value of the creep test temperature and stress with the creep stability depends on the size of the macrograin (I variant of the studies) or such influence was not observed (II variant of the studies). Stability of samples with coarse structure in variant I of creep tests was significantly higher than the samples with fragmented grain. It was found that the observed stability conditions are dependent on the dominant deformation mechanisms under creep tests carried out - diffusion mechanism in variant I and a dislocation mechanism in variant II of the study. The conditions for the formation and growth of the cracks in the tested materials, including the morphological characteristics of their macro-and microstructure were tested. L1 - http://journals.pan.pl/Content/88272/PDF/02_paper.pdf L2 - http://journals.pan.pl/Content/88272 PY - 2014 IS - No 4 DO - 10.2478/afe-2014-0077 KW - Nickel-base superalloyIN-713C and Mar-247 KW - Macrostructure KW - Modification KW - Creep A1 - Cieśla, M. A1 - Findziński, R. A1 - Binczyk, F. A1 - Mańka, M. PB - The Katowice Branch of the Polish Academy of Sciences DA - 2014 T1 - The Influence of Macrostructure of Nickelbased Superalloys IN713C and MAR 247 on the Characteristics of High-temperature Creep UR - http://journals.pan.pl/dlibra/publication/edition/88272 T2 - Archives of Foundry Engineering ER -