Title

Disk Laser Welding of Car Body Zinc Coated Steel Sheets / Spawanie Laserem Dyskowym Blach Ze Stali Karoseryjnej Ocynkowanej

Journal title

Archives of Metallurgy and Materials

Yearbook

2015

Issue

No 4 December

Authors

Burdzik, R. ; Folęga, P. ; Siwiec, G. ; Oleksiak, B. ; Konieczny, Ł. ; Lisiecki, A. ; Warczek, J.

Divisions of PAS

Nauki Techniczne

Publisher

Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences

Date

2015[2015.01.01 AD - 2015.12.31 AD]

Identifier

DOI: 10.1515/amm-2015-0465 ; e-ISSN 2300-1909

Source

Archives of Metallurgy and Materials; 2015; No 4 December

References

Wieczorek (2014), The role of operational factors in shaping of wear properties of alloyed Austempered Ductile Iron Part I Experimental studies abrasive wear of Austempered Ductile Iron ADI ) in the presence of loose quartz abrasive of Metallurgy and Materials, Archives, 59, 1665. ; Pankiewicz (2014), Modeling of powertrain system dynamic behavior with torsional vibration damper Materials, Advanced Research, 1036. ; Lisiecki (2014), Welding of thermomechanically rolled fine - grain steel by different types of lasers, Arch Metall Mater, 59, 1625. ; Yang (2013), Vacuum - Assisted Laser Welding of Zinc - Coated Steels in a Gap - Free Lap Joint Configuration, Welding Journal, 92. ; Tzeng (2006), Gap - free lap welding of zinc - coated steel using pulsed CO laser, Int J Adv Manuf Technol, 2, 287. ; Węgrzyn (2010), Oxide inclusions in steel welds of car body, Mat Sci Forum, 6. ; Górka (2014), Analysis of simulated welding thermal cycles S using a thermal imaging camera ISI, Adv Mat Res Proceedings, 700. ; Sitek (1995), Comparison of hardenability calculation methods of the heat - treatable constructional steels, Mat Proc Tech, 64, 117. ; Moskal (2015), Laser remelting of silicide coatings on Mo and TZM alloy, Sol St Phenomena, 226, doi.org/10.4028/www.scientific.net/SSP.226.121 ; Zawisza (2015), Energy loss and the choice of damper of torsional vibration combustion engines Solid State, Phenomena, 236. ; Burdzik (2014), Identification of structure and directional distribution of vibration transferred to car - body from road roughness submitted to Journal of, Vibroengineering, 16, 324. ; Ma (2013), etal Two - pass laser welding of galvanized high - strength dual - phase steel for a zero - gap lap joint configuration of Materials Processing Technology, Journal, 213. ; Ribolla (2005), The use of Nd : YAG laser weld for large scale volume assembly of automotive body in white of Materials Processing Technology, Journal, 164. ; Chen (2014), A study of fiber laser welding of galvanized steel using a suction method of Materials Processing Technology, Journal, 214. ; Oleksiak (2014), The obtained of concentrates containing precious metals for pyrometallurgical processing, Metalurgija, 53, 605. ; Dąbrowski (2015), The choice of vibroacoustic signal measures in mechanical fault diagnosis of diesel engines Solid State, Phenomena, 236. ; Dasgupta (2008), Laser welding of zinc coated steel : an alternative to resistance spot welding Science and Technology of Welding and, Joining, 13. ; Bonek (2010), Characterization performance of laser melted commercial tool steels, Mat Sci Forum, 654. ; Burdzik (2014), Analysis of impact of chosen parameters on the wear of camshaft, Arch Metall Mater, 59, 957. ; Reisgen (2010), Shielding gas influences on laser weldability of tailored blanks of advanced automotive steels Surface, Applied Science, 257. ; Milberg (2009), Defect - free joining of zinc - coated steels by bifocal hybrid laser welding, Prod Eng Res Devel, 3, 9, doi.org/10.1007/s11740-008-0140-2 ; Jezierski (2015), Parameters of a Gas - Solids Jet in Pneumatic Powder Injection into Liquid Alloys with a Non - Submerged Lance, Metalurgija, 54, 365. ; Burdzik (2013), Research on structure propagation and exposure to general vibration in passenger car for different damping parameters of, Journal Vibroengineering, 15, 1680. ; Kurc (2013), Analysis of Deformation Texture in AISI Steel Sol, St Phenomena, 304. ; Górka (2015), Weldability of thermomechanically treated steels having a high yield point, Arch Metall Mater, 60, 471. ; Golański (2012), Examination of Coil Pipe Butt Joint Made of CrMoVTib Steel After Service, Arch Metall Mater, 7, 1067. ; Bodzenta (2005), Analysis of thermograms based on FFT algorithm de Physique, Journal IV, 129. ; Grajcar (2014), Effect of Heat Input on Microstructure and Hardness Distribution of Laser Welded Si - Al TRIP - Type Steel Adv in Mat and Application examples for the different measurement modes of electrical properties of the solar cells, Sci Eng Arch Metall Mater, 59, 247. ; Oleksiak (2014), Surface tension of cu - bi alloys and wettability in a liquid alloy - refractory material - gaseous phase system, Arch Metall Mater, 59, 281. ; Golański (2014), Mechanical Properties of VM steel after hrs of ageing at temperature, Arch Metall Mater, 30, 600. ; Burdzik (2013), Research on the influence of engine rotational speed to the vibration penetration into the driver via feet - multidimensional analysis of, Journal Vibroengineering, 15, 2114. ; Węgrzyn (2013), Oxygen in steel WMD after welding with micro - jet cooling, Arch Metall Mater, 58, 1067. ; Węgrzyn (2013), Main micro - jet cooling gases for steel welding, Arch Metall Mater, 58, 555. ; Janicki (2014), Disk laser welding of armor steel, Arch Metall Mater, 59, 1641. ; Bonek (2014), The investigation of microstructures and properties of high speed steel hs after laser alloying, Arch Metall Mater, 6, 1647. ; Mei (2009), Research on laser welding of high - strength galvanized automobile steel sheets and Lasers in, Optics Engineering, 47.