Szczegóły

Tytuł artykułu

Influence of Dual Filler Reinforcement on the Curing and Tribo-Mechanical Behaviour of Natural Rubber Nanocomposite for Tire Tread Application

Tytuł czasopisma

Archives of Metallurgy and Materials

Afiliacje

Harikrishna Kumar, M. : School of Building and Mechanical Sciences, Kongu Engineering College, Perundurai – 638060, Tamil Nadu State, India ; Subramaniam, Shankar : School of Building and Mechanical Sciences, Kongu Engineering College, Perundurai – 638060, Tamil Nadu State, India ; Rathanasamy, Rajasekar : School of Building and Mechanical Sciences, Kongu Engineering College, Perundurai – 638060, Tamil Nadu State, India ; Pal, Samir Kumar : Department of Mining Engineering, Indian Institute of Technology, Kharagpur – 721302, West Bengal State, India ; Palaniappan, Sathish Kumar : Department of Mining Engineering, Indian Institute of Technology, Kharagpur – 721302, West Bengal State, India

Autorzy

Słowa kluczowe

Natural Rubber ; Nanoclay ; Carbon black ; Composites ; Tire

Wydział PAN

Nauki Techniczne

Zakres

893-899

Wydawca

Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Commitee on Metallurgy of Polish Academy of Sciences

Bibliografia

[1] K . Pal, R. Rajasekar, D.J. Kang, Z.X. Zhang, S.K. Pal, C.K. Das, J.K. Kim, Mater. Des. 31 (2), 677-686 (2010). DOI : https://doi.org/10.1016/j.matdes.2009.08.014
[2] K . Pal, R. Rajasekar, T. Das, D. Kang, S. Pal, J. Kim, C. Das, Plast., Rubber Compos. 38 (7), 302-308 (2009). DOI : https://doi.org/10.1179/174328909X435393
[3] K . Pal, R. Rajasekar, D.J. Kang, Z.X. Zhang, J.K. Kim, C. Das, Mater. Des. 30 (10), 4035-4042 (2009). DOI : https://doi.org/10.1016/j.matdes.2009.05.021
[4] K . Roy, S.C. Debnath, P. Potiyaraj, J. Elastomers Plast., (2019).
[5] S .J. He, Y.Q. Wang, J. Lin, L.Q. Zhang, Adv. Mater. Res. 28-31 (2012).
[6] S . Ahmadi Shooli, M. Tavakoli, J. Macromol. Sci., Part B, 55 (10), 969-983 (2016). DOI : https://doi.org/10.1080/00222348.2016.1230464
[7] R . Sengupta, S. Chakraborty, S. Bandyopadhyay, S. Dasgupta, R. Mukhopadhyay, K. Auddy, A. Deuri, Polym. Eng. Sci. 47 (11), 1956-1974 (2007). DOI: https://doi.org/10.1002/pen.20921
[8] A. Malas, C.K. Das, J. Mater. Sci. 47 (4), 2016-2024 (2012). DOI : https://doi.org/10.1007/s10853-011-6000-z
[9] Q.-X. Jia, Y.-P. Wu, P. Xiang, Y. Xin, Y.-Q. Wang, L.-Q. Zhang, Polym. Polym. Compos. 13 (7), 709-719 (2005).
[10] H. Nabil, H. Ismail, Int. J. Polym. Anal. Charact. 19 (2), 159-174 (2014). DOI: https://doi.org/10.1080/1023666X.2014.873597
[11] R . Rajasekar, G. Heinrich, A. Das, C.K. Das, J. Nanotechnol. 2009, 1-5 (2009). DOI: https://doi.org/10.1155/2009/405153
[12] Y.-W. Mai, Z.-Z. Yu, Polym. Nanocompos., Woodhead publishing, (2006).
[13] R . Rajasekar, G. Nayak, C. Das, Plast., Rubber Compos. 40 (3), 146-150 (2011). DOI : https://doi.org/10.1179/1743289810Y.0000000010
[14] Y. Liang, Y. Wang, Y. Wu, Y. Lu, H. Zhang, L. Zhang, Polym. Test. 24 (1), 12-17 (2005). DOI : https://doi.org/10.1016/j.polymertesting.2004.08.004
[15] K . Pal, R. Rajasekar, S.K. Pal, J.K. Kim, C.K. Das, J. Nanosci. Nanotechnol. 10 (5), 3022-3033 (2010). DOI: https://doi.org/10.1166/ jnn.2010.2170
[16] R . Iyer, S. Suin, N.K. Shrivastava, S. Maiti, B. Khatua, Polym.- Plast. Technol. Eng. 52 (5), 514-524 (2013). DOI : https://doi.org/10.1080/03602559.2012.762024
[17] P. Saramolee, K. Sahakaro, N. Lopattananon, W.K. Dierkes, J.W. Noordermeer, J. Elastomers Plast. 48 (2), 145-163 (2016). DOI: https://doi.org/10.1177/0095244314568469
[18] N. Hayeemasae, I. Surya, H. Ismail, Int. J. Polym. Anal. Charact. 21 (5), 396-407 (2016). DOI : https://doi.org/10.1080/1023666X.2016.1160970
[19] R . Rajasekar, C. Das, Plast., Rubber Compos. 40 (8), 407-412 (2011). DOI: https://doi.org/10.1179/1743289810Y.0000000039
[20] A. Malas, C.K. Das, Mater. Des. 49, 857-865 (2013). DOI : https://doi.org/10.1016/j.matdes.2013.02.040
[21] R . Rajasekar, G. Nayak, A. Malas, C. Das, Mater. Des. 35 (1), 878-885 (2012). DOI: https://doi.org/10.1016/j.matdes.2011.10.018
[22] R . Mahaling, S. Kumar, T. Rath, C. Das, J. Elastomers Plast. 39 (3), 253-268 (2007). DOI: https://doi.org/10.1177/00952443070 76495
[23] P. Teh, Z.M. Ishak, A. Hashim, J. Karger-Kocsis, U. Ishiaku, Eur. Polym. J. 40 (11), 2513-2521 (2004). DOI : https://doi.org/10.1016/j.eurpolymj.2004.06.025
[24] H. Ismail, H. Chia, Eur. Polym. J. 34 (12), 1857-1863 (1998). DOI: https://doi.org/10.1016/S0014-3057(98)00029-9
[25] T. Mohan, J. Kuriakose, K. Kanny, J. Ind. Eng. Chem. 17 (2), 264-270 (2011). DOI: https://doi.org/10.1016/j.jiec.2011.02.019
[26] M.S. Kim, G.H. Kim, S.R. Chowdhury, Polym. Eng. Sci. 47 (3), 308-313 (2007). DOI: https://doi.org/10.1002/pen.20709
[27] A. Khalil, S.N. Shaikh, Z.R. Nudrat, S. Khaula, Adv. Mater. Phys. Chem. 2012, (2012).
[28] G .C.N. R. Rajasekar, C.K. Das, Materials Science & Technologies, 575-590, (2011).
[29] B.P. Kapgate, C. Das, D. Basu, A. Das, G. Heinrich, J. Ela-stomers Plast. 47 (3), 248-261 (2015). DOI: https://doi.org/10.1177/0095244313507807
[30] K . Pal, T. Das, R. Rajasekar, S.K. Pal, C.K. Das, J. Appl. Polym. Sci. 111 (1), 348-357 (2009). DOI: https://doi.org/10.1002/app.29128
[31] M. Balachandran, S. Bhagawan, J. Polym. Res. 19 (2), 9809 (2012). DOI: https://doi.org/10.1007/s10965-011-9809-x
[32] Y. Liu, L. Li, Q. Wang, Plast., Rubber Compos. 39 (8), 370-376 (2010). DOI: https://doi.org/10.1179/174328910X12691245469871

Data

2021.09.06

Typ

Article

Identyfikator

DOI: 10.24425/amm.2021.136395 ; ISSN 1733-3490

Źródło

Archives of Metallurgy and Materials
×