Tytuł artykułu

Contribution Overview to the Evaluation and Development of SpareParts Management Models: Meta-Heuristic and Probabilistic Methods

Tytuł czasopisma

Management and Production Engineering Review




vol. 12


No 1


Bounou, Oumaima : Mechanical Engineering Laboratory, Faculty of Science and Techniques, Morocco ; Barkany, Abdellah El : Mechanical Engineering Laboratory, Faculty of Science and Techniques, Morocco ; Biyaali, Ahmed El : Mechanical Engineering Laboratory, Faculty of Science and Techniques, Morocco


Słowa kluczowe

Spare parts ; maintenance ; inventory management ; probabilistic methods ; metaheuristic methods, ; risk management ; performance ; maintenance ; inventory management ; probabilistic methods ; metaheuristic methods ; risk management ; performance

Wydział PAN

Wydział IV Nauk Technicznych




Production Engineering Committee of the Polish Academy of Sciences, Polish Association for Production Management


2021.03.21 ; 2021.03.31


Article ; Artykuł /Article


DOI: 10.24425/mper.2021.136869 ; ISSN 2080-8208 ; eISSN 2082-1344


Management and Production Engineering Review; 2021; No 1; 24-37

O czasopiśmie

MISSION STATEMENT Management and Production Engineering Review (MPER) is a peer-refereed, international, multidisciplinary journal covering a broad spectrum of topics in production engineering and management. Production engineering is a currently developing stream of science encompassing planning, design, implementation and management of production and logistic systems. Orientation towards human resources factor differentiates production engineering from other technical disciplines. The journal aims to advance the theoretical and applied knowledge of this rapidly evolving field, with a special focus on production management, organisation of production processes, manage- ment of production knowledge, computer integrated management of production flow, enterprise effectiveness, maintainability and sustainable manufacturing, productivity and organisation, forecasting, modelling and simu- lation, decision making systems, project management, innovation management and technology transfer, quality engineering and safety at work, supply chain optimization and logistics. Management and Production Engineering Review is published under the auspices of the Polish Academy of Sciences Committee on Production Engineering and Polish Association for Production Management. The main purpose of Management and Production Engineering Review is to publish the results of cutting- edge research advancing the concepts, theories and implementation of novel solutions in modern manufacturing. Papers presenting original research results related to production engineering and management education are also welcomed. We welcome original papers written in English. The Journal also publishes technical briefs, discussions of previously published papers, book reviews, and editorials. Letters to the Editor-in-Chief are highly encouraged.
SUBMISSION Papers for submission should be prepared according to the Authors Instructions available at:
SUBSCRIPTION Only subscription guarantees receiving this journal. Subscription orders stating the period of time, along with the subscriber’s name and address should be sent directly to the Editorial Office. Back issues of all previously published volumes are available on request. Subscription price for 2021, Volume 12, including postage and handling, is 200 PLN.

Polityka Open Access

1. License The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on 2. Author’s Warranties The author warrants that the article is original, written by stated author/s, has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author/s. The undersigned also warrants that the manuscript (or its essential substance) has not been published other than as an abstract or doctorate thesis and has not been submitted for consideration elsewhere, for print, electronic or digital publication. 3. User Rights Under the Creative Commons Attribution license, the author(s) and users are free to share (copy, distribute and transmit the contribution) under the following conditions: 1. they must attribute the contribution in the manner specified by the author or licensor, 2. they may alter, transform, or build upon this work, 3. they may use this contribution for commercial purposes. 4. Rights of Authors Authors retain the following rights: - copyright, and other proprietary rights relating to the article, such as patent rights, - the right to use the substance of the article in future own works, including lectures and books, - the right to reproduce the article for own purposes, provided the copies are not offered for sale, - the right to self-archive the article - the right to supervision over the integrity of the content of the work and its fair use. 5. Co-Authorship If the article was prepared jointly with other authors, the signatory of this form warrants that he/she has been authorized by all co-authors to sign this agreement on their behalf, and agrees to inform his/her co-authors of the terms of this agreement. 6. Termination This agreement can be terminated by the author or the Journal Owner upon two months’ notice where the other party has materially breached this agreement and failed to remedy such breach within a month of being given the terminating party’s notice requesting such breach to be remedied. No breach or violation of this agreement will cause this agreement or any license granted in it to terminate automatically or affect the definition of the Journal Owner. The author and the Journal Owner may agree to terminate this agreement at any time. This agreement or any license granted in it cannot be terminated otherwise than in accordance with this section 6. This License shall remain in effect throughout the term of copyright in the Work and may not be revoked without the express written consent of both parties. 7. Royalties This agreement entitles the author to no royalties or other fees. To such extent as legally permissible, the author waives his or her right to collect royalties relative to the article in respect of any use of the article by the Journal Owner or its sublicensee. 8. Miscellaneous The Journal Owner will publish the article (or have it published) in the Journal, if the article’s editorial process is successfully completed and the Journal Owner or its sublicensee has become obligated to have the article published. Where such obligation depends on the payment of a fee, it shall not be deemed to exist until such time as that fee is paid. The Journal Owner may conform the article to a style of punctuation, spelling, capitalization and usage that it deems appropriate. The Journal Owner will be allowed to sublicense the rights that are licensed to it under this agreement. This agreement will be governed by the laws of Poland.

Indeksowanie w bazach

Index Copernicus
Web of Science - Clarivate (ESCI)
Scopus - Elsevier
(CiteScore 2020 - 2.5
SJR 2020 - 0.332
SNIP 2020 - 1.061)

Zasady etyki publikacyjnej

The ethics statements for the journal Management and Production Engineering Review are based on the guidelines of Committee on publication ethics (COPE) and the ELSEVIER publishing ethics resource kit.
For Authors: All articles, published in the journal Management and Production Engineering Review have to comprise a list of references which correspond with the journal’s Instructions to authors for paper preparation. The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted. All articles are tested using antyplagiarism programme. An author should not in general publish manuscripts describing essentially the same research in more than one journal or primary publication. Submitting the same manuscript to more than one journal concurrently constitutes unethical publishing behaviour and is unacceptable. Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study. The corresponding author should ensure that all co-authors have seen and approved the final version of the paper and have agreed to its submission for publication. All authors should disclose in their manuscript any financial or other substantive conflict of interest that might be construed to influence the results or interpretation of their manuscript. All sources of financial support for the project should be disclosed.
For Editor-in-Chief: The editor is responsible for decision which of the articles submitted to the journal should be published. The editor and editorial board and office must not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, potential reviewers, other editorial advisers, and the publisher, as appropriate. Unpublished materials disclosed in a submitted manuscript must not be used in an editor's own research without the express written consent of the author.
For Reviewers: Peer review helps the editor in making editorial decisions and also assist the author in improving the paper. Any selected referee who feels unqualified to review the research reported in a manuscript or knows that its prompt review will be impossible should notify the editor and excuse himself from the review process. Any manuscripts received for review must be treated as confidential documents. They must not be shown to or discussed with others except as authorized by the editor. Reviews should be conducted objectively. Personal criticism of the author is inappropriate. Reviewers should identify relevant published work that has not been cited by the authors. Any statement that an observation, derivation, or argument had been previously reported should be accompanied by the relevant citation. A reviewer should also call to the editor's attention any substantial similarity or overlap between the manuscript under consideration and any other published paper of which they have personal knowledge. Information obtained through peer review must be kept confidential and not used for personal advantage. Reviewers should not consider manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the papers. Other sources:

Procedura recenzowania

Received manuscripts are first examined by the Management and Production Engineering Review Editors. Manuscripts clearly not suitable for publication, incomplete or not prepared in the required style will be sent back to the authors without scientific review, but may be resubmitted as soon as they have been corrected. The corresponding author will be notified by e-mail when the manuscript is registered at the Editorial Office ( The ultimate decision to accept, accept subject to correction, or reject a manuscript lies within the prerogative of the Editor-in-Chief and is not subject to appeal. The editors are not obligated to justify their decision. All manuscripts submitted to MPER editorial office (e-mail: will be sent to at least two and in some cases three reviewers for passing the double-blind review process. The responsible editor will make the decision either to send the manuscript to another reviewer to resolve the difference of opinion or return it to the authors for revision.

The average time during which the preliminary assessment of manuscripts is conducted - 14 days
The average time during which the reviews of manuscripts are conducted - 6 months
The average time in which the article is published - 8.4 months


Zahid Hussain Agha Sarhad University of Science and IT Peshawar Pakistan
Mehmet Ali Akinlar Yildiz Technical University Turkey
Zoran Anisic University of Novi Sad, Faculty of Technical Sciences Serbia
Katarzyna Antosz Rzeszow University of Technology Poland
Rajesh As Maharaja Institute of Technology Thandavapura India
Erfan Babaee Tirkolaee Mazandaran University of Science and Technology Iran
Zbigniew Banaszak Koszalin University of Technology Poland
Jolanta Baran Silesian University of Technology Poland
Mariusz Bednarek WSB Warszawa Poland
Srinivasa Murthy Boorla Grupo Antolin Spain
Oumaima Bounou FST-Fez Marocco
Robert Cep VSB-TU OSTRAVA Czech Republic
Fatih Çetin Niğde Ömer Halisdemir University Turkey
Claudiu Cicea Bucharest University of Economic Studies Romania
Pedro Cunha Instituto Politécnico de Setúbal Portugal
Szymon Cyfert Poznań University of Economics and Business Poland
Asta Daunorienė Assoc. prof., Kaunas University of Technology Lithuania
Ahmed Deif Associate Prof. California Polytechnic State University USA
Yuliia Denysenko Sumy State University Ukraine
Jacek Diakun Poznań University of Technology Poland
Ewa Dostatni Poznan University of Technology Poland
Joanna Duda AGH University of Science and Technology Poland
Milan Edl University of West Bohemia Czech Republic
Joanna Ejdys Bialystok University of Technology Poland
Nurprihatin Filscha Department of Industrial Engineering, Universitas Bunda Mulia Indonesia
Adi Fitra Magister Industrial Engineering ,Mercubuana University Indonesia
Mosè Gallo Department of Chemical, Materials and Industrial Production Engineering, University of Napoli Federico II Italy
Józef Gawlik Cracow Univesity of Technology Poland
Andrzej Gessner Poznan University of Technology Poland
Arkadiusz Gola Lublin University of Technology, Poland Poland
Alireza Goli Department of industrial engineering, Yazd university, Yazd, Iran Iran
Błażej Góralski Poznan University of Technology Chair of Production Engineering Poland
Pop Grigore Marian Technical university of Cluj-Napoca Romania
Łukasz Grudzień Poznan University of Technology Poland
Vitalii Ivanov Sumy State University Ukraine
Małgorzata Jasiulewicz-Kaczmarek Poznan University of Technology Poland
Jozef Jurko Technical University in Košice Poland
Oksana Karpenko RUDN University Russia
Anna Karwasz Poznan University of Technology Poland
Sławomir Klos University of Zielona Góra, Institute of Mechanical Engineering Poland
Remigiusz Kozlowski University of Lodz Poland
Stanisław Krzyżaniak Poznań School of Logistics Poland
Anna Lewandowska-Ciszek State University of Applied Sciences in Konin Poland
Jerzy Lewandowski Warsaw University of Technology Poland
Anna Lis Gdańsk University of Technology Poland
Reza Lotfi Department of industrial engineering Yazd University Iran
Sylwia Łęgowik-Świącik Czestochowa University of Technology Poland
Iulian Malcoci PhD, Associate Professor / Mechanical Engineering Moldova
Damjan Maletic University of Maribor, Faculty of Organizational Sciences Slovenia
Paweł Mielcarek Poznań University of Economics and Business Poland
Anna Nagyova Technical University of Kosice Slovakia
Andrei Stefan Nestian Alexandru Ioan Cuza University Iasi, Romania Romania
Filip Osiński Poznan University of Technology Poland
Ivan Pavlenko Sumy State University Ukraine
Dragan Peraković University of Zagreb, Faculty of transport and traffic sciences Croatia
Niles Perera University of Moratuwa Sri Lanka
Jan Pitel Technical University of Kosice, Faculty of Manufacturing Technologies, Slovakia Slovakia
Paulina Rewers Poznan University od Technology Poland
Piotr Rogala Uniwersytet Ekonomiczny we Wrocłąwiu Poland
Izabela Rojek Kazimierz WIelki University Poland
Łukasz Rymaniak Poznan University of Technology Poland
Krzysztof Santarek Politechnika Warszawska Poland
Michał Sąsiadek Uniwersytet Zielonogórski Poland
Shah Rukh Shakeel University of Vaasa Finland Finland
Parveen Sharma Lovely Professional University Phagwara India
Dorota Stadnicka Rzeszow University of Technology Poland
Binod Timilsina University of Vaasa Finland
Justyna Trojanowska Poznan University of Technology Poland
Stefan Trzcielinski Poznan University of Technology, Faculty of Engineering Management Poland
Mariusz Uchroński Wroclaw University of Science and Technology Poland
Nicolae Stelian Ungureanu Technical University of Cluj-Napoca , Romania Romania
Wiesław Urban Politechnika Białostocka Poland
Wiesław Urban Bialystok University of Technology Poland
Gerhard-Wilhelm Weber FEM, PUT Poland
Ewa Więcek-Janka PUT Poland
Marek Wirkus Politechnika Gdańska, Wydział Zarządzenia i Ekonomii Poland
Rika Yunitarini Trunojoyo University Indonesia Indonesia
Jozef Zajac TU Kosice Slovakia
Paweł Zmarzły Kielce University of Technology Poland
Krzysztof Żywicki Poznan University of Technology Poland