Tytuł artykułu

High flow, low shear impellers versus high shear impellers; dispersion of oil drops in water and other examples

Tytuł czasopisma

Chemical and Process Engineering




vol. 42


No 2


Pacek, Andrzej W. : School of Chemical Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT, UK ; Nienow, Alvin W. : School of Chemical Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT, UK


Słowa kluczowe

high shear/high flow descriptors ; drop sizes ; mixing time ; bioprocessing

Wydział PAN

Nauki Techniczne




Polish Academy of Sciences Committee of Chemical and Process Engineering


Arai K., Konno M., Matumagata Y., Saito S., 1977. The effect of dispersed phase viscosity on the maximum stable drop size in turbulent flow. J. Chem. Eng. Jpn., 10, 325–330. DOI: 10.1252/jcej.10.325.

Baldyga J., Bourne J.R., Pacek A.W., Amanullah A., Nienow A.W., 2001. Effects of agitation and scale-up on drop size in turbulent dispersions: Allowance for intermittency. Chem. Eng. Sci., 56, 3377–3385. DOI: 10.1016/s0009-2509(01)00027-6.

Chapman C.M., Nienow A.W., Cooke M., Middleton J.C., 1983. Particle-gas-liquid mixing in stirred vessels: Part 2 – gas-liquid mixing. Chem. Eng. Res. Des., 61, 82–95.

Costariol E.,Rotondi M.C., Amini A., Hewitt C.J., NienowA.W., Heathman T.R.J., Rafiq Q.A., 2020. Demonstrating the manufacture of human CAR-T cells in an automated stirred-tank bioreactor. Biotechnol. J., 15, 2000177. DOI: 10.1002/biot.202000177.

Davies J.T., 1985. Droplet sizes of emulsions related to turbulent energy dissipation rates. Chem.Eng. Sci., 40, 839–842. DOI: 10.1016/0009-2509(85)85036-3.

Dyster K.N., Koutsakos E., Jaworski Z., Nienow A.W., 1993. An LDA study of the radial discharge velocities generated by a Rushton turbine: Newtonian fluids, Re ≥ 5. Chem. Eng. Res. Des., 71, 11–23.

Fondy P.L., Bates R.L., 1963.Agitation of liquid systems requiring a high shear characteristic. AIChE J., 9, 338–342. DOI: 10.1002/aic.690090312.

Ghotli R.A., Raman A.A.A., Ibrahim S., Baroutian S., 2013. Liquid – liquid mixing in stirred vessels: A review. Chem. Eng. Comm., 200, 595–627. DOI: 10.1080/00986445.2012.717313.

Hanga M.P., Ali J., Moutsatsou P., de la Raga F.A., Hewitt C.J., NienowA.W,Wall I., 2020.

Bioprocess development for scalable production of cultivated meat. Biotech. Bioeng., 117, 3029–3039. DOI: 10.1002/bit.27469.

Hass V.C., Nienow A.W., 1989. A new axial pumping agitator for the dispersion of gas in liquids. Chem. Ing. Technik, 61, 152–154. DOI: 10.1002/cite.330610213.

Ibrahim S., Nienow A.W., 2004. Suspension of microcarriers for cell culture with axial flow impellers. Chem. Eng. Res. Des., 82, 1082–1088. DOI: 10.1205/cerd.82.9.1082.44161.

Indco, 2021. The difference between high shear and low shear mixing. Available at:

Jaworski Z., Nienow A.W., Dyster K.N., 1996. An LDA study of the turbulent flow field in a baffled vessel agitated by an axial, down-pumping hydrofoil impeller. Can. J. Chem. Eng., 74, 3–15. DOI: 10.1002/cjce.5450740103.

Justen P., Paul G.C., Nienow A.W., Thomas C.R., 1996. Dependence of mycelial morphology on impeller type and agitation intensity. Biotech. Bioeng., 52, 672–684. DOI: 10.1002/(SICI)1097-0290(19961220)52:6672::AIDBIT5> 3.0.CO;2-L.

Langheinrich C., Nienow A.W., Eddleston T., Stevenson N.C., Emery A.N., Clayton T.M, Slater N.K.H., 1998.

Liquid homogenisation studies in animal cell bioreactors of up to 8m3 in volume. Food Bioprod. Process., 76, 107–116. DOI: 10.1205/096030898531873.

Leng D.E., Calabrese R.V., 2004. Immiscible liquid-liquid systems. In: Paul E.L., Atiemo-Obeng V.A., Kresta S.M. (Eds), Handbook of industrial mixing: Science and Practice, John Wiley, New York. 639–753. DOI: 10.1002/0471451452.ch12.

Leng D.E., Calabrese R.V., 2016. Immiscible liquid-liquid systems. In: Kresta S.M., Etchells III A.W., Dickey D.S., Atiemo-Obeng V.A. (Eds), Advances in industrial mixing: A companion to the handbook of industrial mixing. John Wiley, New York. 12, 457–464.

McManameyW.J., 1979. Sauter mean and maximum drop diameters of liquid-liquid dispersions in turbulent agitated vessel at low dispersed phase hold-up. Chem. Eng. Sci., 34, 432–434. DOI: 10.1016/0009-2509(79)85081-2.

Musgrove M., Ruszkowski S., 2000. Influence of impeller type,and agitation conditions on the drop size of immiscible liquid dispersions. Proceedings of the 10th European Conference on Mixing. Delft, the Netherlands, 2–5 July 2000, 165–172. DOI: 10.1016/b978-044450476-0/50022-4.

Nienow A.W., Coopman K., Heathman T.R.J., Rafiq Q.A., Hewitt C.J., 2016. Chapter 3 – Bioreactor engineering fundamentals for stem cell manufacturing. In: Cabral J.M.S. et al (Eds.) Stem Cell Manufacturing. Elsevier Science, Cambridge, USA. 43–75. DOI: 10.1016/B978-0-444-63265-4.00003-0.

Nienow A.W., Scott W.H., Hewitt C.J., Thomas C.R., Lewis G., Amanullah A., Kiss R., Meier S.J., 2013. Scaledown studies for assessing the impact of different stress parameters on growth and product quality during animal cell culture. Chem. Eng. Res. Des., 91, 2265–2274. DOI: 10.1016/j.cherd.2013.04.002.

Nienow A.W., 2021. The impact of fluid dynamic stress in stirred bioreactors-the scale of the biological entity: A personal view. Chem. Ing. Tech., 93, 17–30. DOI: 10.1002/cite.202000176.

Nienow A.W., 1997. On impeller circulation and mixing effectiveness in the turbulent flow regime. Chem. Eng. Sci., 52, 2557–2565. DOI: 10.1016/S0009-2509(97)00072-9.

Nienow A.W., 2014. Stirring and stirred tank reactors. Chem. Ing Tech., 86, 2063–2074. DOI: 10.1002/cite.201400087.

Nienow A.W., Bujalski W., 2002. Recent studies on agitated three phase (gas-liquid-solid) systems in the turbulent regime. Chem. Eng. Res. Des., 80, 832–838. DOI: 10.1205/026387602321143363.

NOV Chemineer, 2021. Available at:

Oh S.K.W., Nienow A.W., Emery A.N., Al-Rubeai M., 1992. Further studies of the culture of mouse hybridomas in an agitated bioreactor with and without continuous sparging. J. Biotechnol., 22, 245–270. DOI: 10.1016/0168-1656(92)90144-X.

Oldshue J.Y., 1983. Fluid mixing technology and practice, McGraw Hill, New York.

Pacek A.W, Nienow A.W., 1995. A problem for the description of turbulent dispersed liquid-liquid systems. Int. J. Multiphase Flow, 21, 323–325. DOI: 10.1016/0301-9322(94)00068-u.

Pacek A.W, Nienow A.W., Moore I.P.T., 1994b. On the structure of turbulent liquid-liquid dispersed flows in an agitated vessel. Chem. Eng. Sci., 49, 3485–3498. DOI: 10.1016/s0009-2509(94)85027-5.

Pacek A.W., Chamsart S., NienowA.W., Bakker A., 1999. The influence of impeller type on mean drop size and drop size distribution in an agitated vessel. Chem. Eng. Sci., 54, 4211–4222. DOI: 10.1016/s0009-2509(99)00156-6.

Pacek A.W., Moore I.P.T., Calabrese R.V., Nienow A.W., 1993. Evolution of drop size distributions and average drop diameters in liquid-liquid dispersions before and after phase inversion. Chem. Eng. Res. Des., 71, 340–341.

Pacek A.W., Moore I.P.T., Nienow A.W., Calabrese R.V., 1994a. A video technique for the measurement of the dynamics of liquid-liquid dispersion during phase inversion. AIChE J., 40, 1940–1949. DOI: 10.1002/aic.690401203.

Padron D.A., Okonkwo D.A., 2018. Effect of impeller type on drop size of turbulent, non-coalescing liquid-lquid dispersions. 16th European Conference on Mixing, Toulouse, France, 9–12 September 2018.

Paterson G.K., Pauls E.L., Kresta S.M., Etchells A.W., 2015. Mixing and chemical reaction. In: Kresta S.M., Etchells III A.W., Dickey D.S, Atiemo-Obeng V.A. (Eds.), Advances in industrial mixing: A companion to the handbook of industrial mixing. John Wiley, New York. 465–478.

Rotondi M., Grace N., Betts J., Bargh N., Costariol E., Zoro B., Hewitt C.J., Nienow A.W., Rafiq Q.A., 2021. Design and development of a new ambr250r bioreactor vessel for improved cell and gene therapy applications. Biotechnol. Lett., 43, 1103–1116. DOI: 10.1007/s10529-021-03076-3.

Sandadi S., Pedersen H., Bowers J.S., Rendeiro D., 2011. A comprehensive comparison of mixing, mass transfer, Chinese hamster ovary cell growth, and antibody production using Rushton turbine and marine impellers. Bioprocess. Biosyst. Eng., 34, 819. DOI: 10.1007/s00449-011-0532-0.

Sepro Mixing and Pumping, 2021. Mixing basics: Shear and flow. Available at:

Simmons M.J.H., Zhu H, BujalskiW., Hewitt C.J., Nienow A.W., 2007. Mixing in bioreactors using agitators with a high solidity ratio and deep blades. Chem. Eng. Res. Des., 85, 551–559. DOI: 10.1205/cherd06157.

SPX Flow, 2021. Lightnin Mixers. General Overview.Available at:

Wille M., Langer G., Werner U., 2001. The influence of macroscopic elongational flow on dispersion processes in agitated tanks. Chem. Eng. Technol., 24, 119–127. DOI: 10.1002/1521-4125(200102)24:2119::aidceat119>;2-g.






DOI: 10.24425/cpe.2021.137342 ; ISSN 0208-6425

Rada naukowa

Editorial Board

Ali Mesbach, UC Berkeley, USA

Anna Gancarczyk, Institute of Chemical Engineering, Polish Academy of Sciences, Poland

Anna Trusek, Wrocław University of Science and Technology, Poland

Bettina Muster-Slawitsch, AAE Intec, Austria

Daria Camilla Boffito, Polytechnique Montreal, Canada

Donata Konopacka-Łyskawa, Gdańsk University of Technology, Poland

Dorota Antos, Rzeszów University of Technology, Poland

Evgeny Rebrov, University of Warwick, UK

Georgios Stefanidis, National Technical University of Athens, Greece

Ireneusz Grubecki, Bydgoszcz Univeristy of Science and Technology, Poland

Johan Tinge, Fibrant B.V., The Netherlands

Katarzyna Bizon, Cracow University of Technology, Poland

Katarzyna Szymańska, Silesian University of Technology, Poland

Marcin Bizukojć, Łódź University of Technology, Poland

Marek Ochowiak, Poznań University of Technology, Poland

Mirko Skiborowski, Hamburg University of Technology, Germany

Nikola Nikacevic, University of Belgrade, Serbia

Rafał Rakoczy, West Pomeranian University of Technology, Poland

Richard Lakerveld, Hong Kong University of Science and Technology, Hong Kong

Tom van Gerven, KU Leuven, Belgium

Tomasz Sosnowski, Warsaw University of Technology, Poland

Zasady etyki publikacyjnej


Editors of the "Chemical and Process Engineering" pay attention to maintain ethical standards in scientific publications and undertake any possible measure to counteract neglecting the standards. Papers submitted for publication are evaluated with respect to reliability, conforming to ethical standards and the advancement of science. Principles given below are based on COPE's Best Practice Guidelines for Journal Editors, which may be found at:

Authors’ duties

Authorship should be limited to persons, who markedly contributed to the idea, project, realization and interpretation of results. All of them have to be listed as co-authors. Other persons, who affected some important parts of the study should be listed or mentioned as co-workers. Author should be certain that all co-authors were enlisted, saw and accepted final version of the paper and agreed upon its publication.

Disclosure and conflict of interests
Author should disclose all sources of financing of his/her study, the input of scientific institutions, associations and other subjects and all important conflicts of interests that might affect results and interpretation of the study.

Standards in reporting
Authors of papers based on original studies should present precise description of performed work and objective discussion on its importance. Source data should be accurately presented in the paper. The paper should contain detailed information and references that would enable others to use it. False or intentionally not true declarations are not ethical and are not accepted by the editors.

Access to and storage of data
Authors may be asked for providing raw data used in the paper for editorial assessment and should be prepared to store them within the reasonable time period after publication.

Multiple, unnecessary and competitive publications
As a rule author should not publish papers describing the same studies in more than one journal or primary publication. Submission of the same paper to more than one journal at the same time is not ethical and prohibited.

Confirmation of sources
Author should cite papers that affected the creation of submitted manuscript and every time he/she should confirm the use of other authors’ work.

Important errors in published papers
When author finds an important error or inaccuracy in his/her paper, he/she is obliged to inform Editorial Office about this as soon as possible.

Originality and plagiarism
Author may submit only original papers. He/she should be certain that the names of authors referred to in the paper and/or fragments of their texts are properly cited or mentioned.

Ghost writing/guest authorship are manifestation of scientific unreliability and all such cases will be revealed including notification of appropriate subjects. Signs of scientific unreliability, especially violation of ethical principles in science will be documented by the Editorial Office.

Duties of the Editorial Office

Editors’ duties
Editors know the rules of journal editing including the procedures applied in case of uncovering non-ethical practices.

Decisions on publication
Editor-in Chief is obliged to apply present legal status as to defamation, violation of author’s rights and plagiarism and bears the responsibility for decisions. He/she may consult thematic editors and/or referees in that matter.

Selection of referees
Editorial Office provides appropriate selection of referees and takes care about appropriate course of peer –reviewing (the review has to be substantive).

Every member of editorial team is not allowed to disclose information about submitted paper to any person except its author, referees, other advisors and editors.

To counteract discrimination the Editorial Office obeys the legally binding rules.

Disclosure and conflict of interests
Not published papers or their fragments cannot be used in the studies of editorial team or ref-erees without written consent of the author.

Referees' duties

Editorial decisions

Referee supports Editor-in-Chief in taking editorial decisions and may also support author in improving the paper.

Back information
In case a selected referee is not able to review the paper or cannot do it in due time period, he/she should inform secretary of the Editorial Office about this fact.

Objectivity standards
Reviews should be objective. Personal criticism is inappropriate. Referees should clearly ex-press their opinions and support them with proper arguments.

All reviewed papers should be dealt with as confidential. They should not be discussed or revealed to persons other than the secretary of the Editorial Office.

All reviews should be made anonymously and the Editorial Office does not disclose names of the authors to referees.

Disclosure and conflict of interests
Confidential information or ideas resulting from reviewing procedure should be kept secret and should not be used to gain personal benefits. Referees should not review papers, which might generate conflict of interests resulting from relationships with the author, firm or institution involved in the study.

Confirmation of sources
Referees should indicate publications which are not referred to in the paper. Any statement that the observation, source or argument was described previously should be supported by appropriate citation. Referee should also inform the secretary of the Editorial Office about significant similarity to or partial overlapping of the reviewed paper with any other published paper and about suspected plagiarism.