Tytuł artykułu

Modelling particle deagglomeration in a batch homogenizer using full CFD and mechanistic models

Tytuł czasopisma

Chemical and Process Engineering




vol. 42


No 2


Krzosa, Radosław : Warsaw University of Technology, Faculty of Chemical and Process Engineering, ul.Warynskiego 1, 00-645 Warsaw, Poland ; Wojtas, Krzysztof : Warsaw University of Technology, Faculty of Chemical and Process Engineering, ul.Warynskiego 1, 00-645 Warsaw, Poland ; Golec, Jakub : Warsaw University of Technology, Faculty of Chemical and Process Engineering, ul.Warynskiego 1, 00-645 Warsaw, Poland ; Makowski, Łukasz : Warsaw University of Technology, Faculty of Chemical and Process Engineering, ul.Warynskiego 1, 00-645 Warsaw, Poland ; Orciuch, Wojciech : Warsaw University of Technology, Faculty of Chemical and Process Engineering, ul.Warynskiego 1, 00-645 Warsaw, Poland ; Adamek, Radosław : ICHEMAD–Profarb, ul. Chorzowska 117, 44–100 Gliwice, Poland


Słowa kluczowe

population balance ; titanium dioxide ; CFD ; breakup ; high shear impeller

Wydział PAN

Nauki Techniczne




Polish Academy of Sciences Committee of Chemical and Process Engineering


Atiemo-Obeng V.A., Calabrese R.V., 2004. Rotor–stator mixing devices, In: Paul E.L., Atiemo-Obeng V.A., Kresta S.M. (Eds.), Handbook of industrial mixing. DOI: 10.1002/0471451452.ch8.

Bałdyga J., Makowski Ł., OrciuchW., Sauter C., Schuchmann H.P., 2008a. Deagglomeration processes in high-shear devices. Chem. Eng. Res. Des., 86, 1369–1381. DOI: 10.1016/j.cherd.2008.08.016.

Bałdyga J., Orciuch W., Makowski Ł., Malik K., Özcan-Taskin G., Eagles W., Padron G., 2008b. Dispersion of nanoparticle clusters in a rotor-stator mixer. Ind. Eng. Chem. Res., 47, 3652–3663. DOI: 10.1021/ie070899u.

Bałdyga J., Orciuch W., Makowski Ł., Malski-Brodzicki M., Malik K., 2007. Break up of nano-particle clusters in high-shear devices. Chem. Eng. Process. Process Intensif., 46, 851–861. DOI: 10.1016/j.cep.2007.05.016.

Boverhof D.R., Bramante C.M., Butala J.H., Clancy S.F., LafranconiW.M.,West J., Gordon S.C., 2015. Comparative assessment of nanomaterial definitions and safety evaluation considerations. Regul. Toxicol. Pharm., 73, 137–150. DOI: 10.1016/j.yrtph.2015.06.001.

Chung C.J., Lin H.I., Tsou H.K., Shi Z.Y., He J.L., 2008. An antimicrobial TiO2 coating for reducing hospitalacquired infection. J. Biomed. Mater. Res. Part B, 85b, 220–224. DOI: 10.1002/jbm.b.30939.

Fujishima A., Rao T.N., Tryk D.A., 2000. Titanium dioxide photocatalysis. J. Photochem. Photobiol., C, 1, 1–21. DOI: 10.1016/S1389-5567(00)00002-2.

Gajovic A., Stubicar M., Ivanda M., Furi K., 2001. Raman spectroscopy of ball-milled TiO2. J. Mol. Struct., 563–564, 315–320. DOI: 10.1016/S0022-2860(00)00790-0.

Gavi E., Kubicki D., Padron G.A., Özcan-Taskın N.G., 2018. Breakup of nanoparticle clusters using Microfluidizer M110-P. Chem. Eng. Res. Des., 132, 902–912. DOI: 10.1016/j.cherd.2018.01.011.

Gázquez M.J., Bolívar J.P., Garcia-Tenorio R., Vaca F., 2014. A review of the production cycle of titanium dioxide pigment. Mater. Sci. Appl., 5, 441–458. DOI: 10.4236/msa.2014.57048.

Hansen S., Khakhar D.V., Ottino J.M., 1998. Dispersion of solids in nonhomogeneous viscous flows. Chem. Eng. Sci., 53, 1803–1817. DOI: 10.1016/S0009-2509(98)00010-4.

Hass G., 1952. Preparation, properties and optical applications of thin films of titanium dioxide. Vacuum, 2, 331–345. DOI: 10.1016/0042-207X(52)93783-4.

Kamaly S.W., Tarleton A.C., Özcan-Taskın N.G., 2017. Dispersion of clusters of nanoscale silica particles using batch rotor-stators. Adv. Powder Technol., 28, 2357–2365. DOI: 10.1016/j.apt.2017.06.017.

Krzosa R., Makowski Ł., OrciuchW., Adamek R., 2021. Population balance application in TiO2 particle deagglomeration process modeling. Energies, 14, 3523. DOI: 10.3390/en14123523.

Mandzy N., Grulke E., Druffel T., 2005. Breakage of TiO2 agglomerates in electrostatically stabilized aqueous dispersions. Powder Technol., 160, 121–126. DOI: 10.1016/j.powtec.2005.08.020.

Marchisio D.L., Fox R.O., 2005. Solution of population balance equations using the direct quadrature method of moments. J. Aerosol Sci., 36, 43–73. DOI: 10.1016/j.jaerosci.2004.07.009.

Marchisio D.L., Vigil R.D., Fox R.O., 2003. Quadrature method of moments for aggregation-breakage processes. J. Colloid Interface Sci., 258, 322–334. DOI: 10.1016/S0021-9797(02)00054-1.

Martínez-de Jesús G., Ramírez-Munoz J., García-Cortés D., Cota L.G., 2018. Computational fluid dynamics study of flow induced by a grooved high-shear impeller in an unbaffled tank. Chem. Eng. Technol., 41, 580–589. DOI: 10.1002/ceat.201700091.

McGraw R., 1997. Description of aerosol dynamics by the quadrature method of moments. Aerosol Sci. Technol., 27, 255–265. DOI: 10.1080/02786829708965471.

Meacock G., Taylor K.D.A., Knowles M.J., Himonides A., 1997. The improved whitening of minced cod flesh using dispersed titanium dioxide. J. Sci. Food Agric., 73, 221–225. DOI: 10.1002/(SICI)1097-0010(199702)73:2221::AID-JSFA708>3.0.CO;2-U.

Middlemas S., Fang Z.Z., Fan P., 2015. Life cycle assessment comparison of emerging and traditional Titanium dioxide manufacturing processes. J. Clean. Prod., 89, 137–147. DOI: 10.1016/j.jclepro.2014.11.019.

Mikulášek P., Wakeman R.J., Marchant J.Q., 1997. The influence of pH and temperature on the rheology and stability of aqueous titanium dioxide dispersions. Chem. Eng. J., 67, 97–102. DOI: 10.1016/S1385-8947(97)00026-0.

Özcan-Taskin N.G., Padron G., Voelkel A., 2009. Effect of particle type on the mechanisms of break up of nanoscale particle clusters. Chem. Eng. Res. Des., 87, 468–473. DOI: 10.1016/j.cherd.2008.12.012.

Özcan-Taskın N.G., Padron G.A., Kubicki D., 2016. Comparative performance of in-line rotor-stators for deagglomeration processes. Chem. Eng. Sci., 156, 186–196. DOI: 10.1016/j.ces.2016.09.023.

Randolph A.D., Larson M.A., 1962. Transient and steady state size distributions in continuous mixed suspension crystallizers. AIChE J., 8, 639–645. DOI: 10.1002/aic.690080515.

Reck E., Richards M., 1999. TiO2 manufacture and life cycle analysis. Pigm. Resin Technol., 28, 149–157. DOI: 10.1108/03699429910271297.

Rodgers T.L., Cooke M., Siperstein F.R., Kowalski A., 2009. Mixing and dissolution times for a cowles disk agitator in large-scale emulsion preparation. Ind. Eng. Chem. Res., 48, 6859–6868. DOI: 10.1021/ie900286s.

Sen S., Ram M.L., Roy S., Sarkar B.K., 1999. The structural transformation of anatase TiO2 by high-energy vibrational ball milling. J. Mater. Res., 14, 841–848. DOI: 10.1557/JMR.1999.0112.

Shamlou P.A., Titchener-Hooker N., 1993. Turbulent aggregation and breakup of particles in liquids in stirred vessels, In: Shamlou P.A. (Ed.), Processing of Solid–Liquid Suspensions. Butterworth-Heinemann Ltd. 1–25. DOI: 10.1016/b978-0-7506-1134-3.50005-3.

Tang S., Ma Y., Shiu C., 2001. Modelling the mechanical strength of fractal aggregates. Colloids Surf., A, 180, 7–16. DOI: 10.1016/S0927-7757(00)00743-3.

Unadkat H., Rielly C.D., Nagy Z.K., 2011. PIV study of the flow field generated by a sawtooth impeller. Chem. Eng. Sci., 66, 5374–5387. DOI: 10.1016/j.ces.2011.07.046.

Weir A., Westerhoff P., Fabricius L., Hristovski K., Von Goetz N., 2012. Titanium dioxide nanoparticles in food and personal care products. Environ. Sci. Technol., 46, 2242–2250. DOI: 10.1021/es204168d.

Xie L., Rielly C.D., Eagles W., Özcan-Taskin G., 2007. Dispersion of nano-particle clusters using mixed flow and high shear impellers in stirred tanks. Chem. Eng. Res. Des., 85, 676–684. DOI: 10.1205/cherd06195.

Xie L., Rielly C.D., Özcan-Taskin G., 2008. Break-Up of nanoparticle agglomerates by hydrodynamically limited processes. J. Dispers. Sci. Technol., 29, 573–579. DOI: 10.1080/01932690701729211.

Yang H.G., Li C.Z., Gu H.C., Fang T.N., 2001. Rheological behavior of titanium dioxide suspensions. J. Colloid Interface Sci., 236, 96–103. DOI: 10.1006/jcis.2000.7373.

Yu J., Zhao X., Zhao Q.,Wang G., 2001. Preparation and characterization of super-hydrophilic porous TiO2 coating films. Mater. Chem. Phys., 68, 253–259 DOI: 10.1016/S0254-0584(00)00364-3.

Zhang J., Xu S., Li W., 2012. High shear mixers: A review of typical applications and studies on power draw, flow pattern, energy dissipation and transfer properties. Chem. Eng. Process., 57–58, 25–41. DOI: 10.1016/j.cep.2012.04.004.






DOI: 10.24425/cpe.2021.137344 ; ISSN 0208-6425

Rada naukowa

Editorial Board

Ali Mesbach, UC Berkeley, USA

Anna Gancarczyk, Institute of Chemical Engineering, Polish Academy of Sciences, Poland

Anna Trusek, Wrocław University of Science and Technology, Poland

Bettina Muster-Slawitsch, AAE Intec, Austria

Daria Camilla Boffito, Polytechnique Montreal, Canada

Donata Konopacka-Łyskawa, Gdańsk University of Technology, Poland

Dorota Antos, Rzeszów University of Technology, Poland

Evgeny Rebrov, University of Warwick, UK

Georgios Stefanidis, National Technical University of Athens, Greece

Ireneusz Grubecki, Bydgoszcz Univeristy of Science and Technology, Poland

Johan Tinge, Fibrant B.V., The Netherlands

Katarzyna Bizon, Cracow University of Technology, Poland

Katarzyna Szymańska, Silesian University of Technology, Poland

Marcin Bizukojć, Łódź University of Technology, Poland

Marek Ochowiak, Poznań University of Technology, Poland

Mirko Skiborowski, Hamburg University of Technology, Germany

Nikola Nikacevic, University of Belgrade, Serbia

Rafał Rakoczy, West Pomeranian University of Technology, Poland

Richard Lakerveld, Hong Kong University of Science and Technology, Hong Kong

Tom van Gerven, KU Leuven, Belgium

Tomasz Sosnowski, Warsaw University of Technology, Poland

Zasady etyki publikacyjnej


Editors of the "Chemical and Process Engineering" pay attention to maintain ethical standards in scientific publications and undertake any possible measure to counteract neglecting the standards. Papers submitted for publication are evaluated with respect to reliability, conforming to ethical standards and the advancement of science. Principles given below are based on COPE's Best Practice Guidelines for Journal Editors, which may be found at:

Authors’ duties

Authorship should be limited to persons, who markedly contributed to the idea, project, realization and interpretation of results. All of them have to be listed as co-authors. Other persons, who affected some important parts of the study should be listed or mentioned as co-workers. Author should be certain that all co-authors were enlisted, saw and accepted final version of the paper and agreed upon its publication.

Disclosure and conflict of interests
Author should disclose all sources of financing of his/her study, the input of scientific institutions, associations and other subjects and all important conflicts of interests that might affect results and interpretation of the study.

Standards in reporting
Authors of papers based on original studies should present precise description of performed work and objective discussion on its importance. Source data should be accurately presented in the paper. The paper should contain detailed information and references that would enable others to use it. False or intentionally not true declarations are not ethical and are not accepted by the editors.

Access to and storage of data
Authors may be asked for providing raw data used in the paper for editorial assessment and should be prepared to store them within the reasonable time period after publication.

Multiple, unnecessary and competitive publications
As a rule author should not publish papers describing the same studies in more than one journal or primary publication. Submission of the same paper to more than one journal at the same time is not ethical and prohibited.

Confirmation of sources
Author should cite papers that affected the creation of submitted manuscript and every time he/she should confirm the use of other authors’ work.

Important errors in published papers
When author finds an important error or inaccuracy in his/her paper, he/she is obliged to inform Editorial Office about this as soon as possible.

Originality and plagiarism
Author may submit only original papers. He/she should be certain that the names of authors referred to in the paper and/or fragments of their texts are properly cited or mentioned.

Ghost writing/guest authorship are manifestation of scientific unreliability and all such cases will be revealed including notification of appropriate subjects. Signs of scientific unreliability, especially violation of ethical principles in science will be documented by the Editorial Office.

Duties of the Editorial Office

Editors’ duties
Editors know the rules of journal editing including the procedures applied in case of uncovering non-ethical practices.

Decisions on publication
Editor-in Chief is obliged to apply present legal status as to defamation, violation of author’s rights and plagiarism and bears the responsibility for decisions. He/she may consult thematic editors and/or referees in that matter.

Selection of referees
Editorial Office provides appropriate selection of referees and takes care about appropriate course of peer –reviewing (the review has to be substantive).

Every member of editorial team is not allowed to disclose information about submitted paper to any person except its author, referees, other advisors and editors.

To counteract discrimination the Editorial Office obeys the legally binding rules.

Disclosure and conflict of interests
Not published papers or their fragments cannot be used in the studies of editorial team or ref-erees without written consent of the author.

Referees' duties

Editorial decisions

Referee supports Editor-in-Chief in taking editorial decisions and may also support author in improving the paper.

Back information
In case a selected referee is not able to review the paper or cannot do it in due time period, he/she should inform secretary of the Editorial Office about this fact.

Objectivity standards
Reviews should be objective. Personal criticism is inappropriate. Referees should clearly ex-press their opinions and support them with proper arguments.

All reviewed papers should be dealt with as confidential. They should not be discussed or revealed to persons other than the secretary of the Editorial Office.

All reviews should be made anonymously and the Editorial Office does not disclose names of the authors to referees.

Disclosure and conflict of interests
Confidential information or ideas resulting from reviewing procedure should be kept secret and should not be used to gain personal benefits. Referees should not review papers, which might generate conflict of interests resulting from relationships with the author, firm or institution involved in the study.

Confirmation of sources
Referees should indicate publications which are not referred to in the paper. Any statement that the observation, source or argument was described previously should be supported by appropriate citation. Referee should also inform the secretary of the Editorial Office about significant similarity to or partial overlapping of the reviewed paper with any other published paper and about suspected plagiarism.