Tytuł artykułu

Mechanical alloying of Mg-Zn-Ca-Er alloy

Tytuł czasopisma

Bulletin of the Polish Academy of Sciences: Technical Sciences








Hrapkowicz, Bartłomiej : Department of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18A, 44-100 Gliwice, Poland ; Lesz, Sabina : Department of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18A, 44-100 Gliwice, Poland ; Kremzer, Marek : Department of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18A, 44-100 Gliwice, Poland ; Karolus, Małgorzata : Institute of Materials Engineering, University of Silesia, ul. 75 Pułku Piechoty 1a, 41-500 Chorzów, Poland ; Pakieła, Wojciech : Department of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18A, 44-100 Gliwice, Poland


Słowa kluczowe

magnesium ; mechanical alloying ; erbium ; rare earth elements

Wydział PAN

Nauki Techniczne




  1.  C. Suryanarayana and N. Al-Aqeeli, “Mechanically alloyed nanocomposites,” Prog. Mater. Sci., vol. 58, no. 4, pp. 383–502, May 2013.
  2.  C. Suryanarayana, “Mechanical alloying and milling,” Prog. Mater. Sci., vol. 46, no. 1–2, pp. 1–184, Jan. 2001.
  3.  A. Drygała, L.A. Dobrzański, M. Szindler, M. Prokopiuk Vel Prokopowicz, M. Pawlyta, and K. Lukaszkowicz, “Carbon nanotubes counter electrode for dye-sensitized solar cells application,” Arch. Metall. Mater., vol. 61, no. 2A, pp. 803–806, 2016.
  4.  L.A. Dobrzański and A. Drygała, “Influence of Laser Processing on Polycrystalline Silicon Surface,” Mater. Sci. Forum, vol. 706–709, pp. 829–834, Jan. 2012.
  5.  L.A. Dobrzański, T. Tański, A.D. Dobrzańska-Danikiewicz, E. Jonda, M. Bonek, and A. Drygała, “Structures, properties and development trends of laser-surface-treated hot-work steels, light metal alloys and polycrystalline silicon,” in Laser Surface Engineering: Processes and Applications, Elsevier Inc., 2015, pp. 3–32.
  6.  C. Suryanarayana, “Mechanical alloying and milling,” Prog. Mater. Sci., vol. 46, no. 1–2, pp. 1–184, Jan. 2001.
  7.  M. Toozandehjani, K.A. Matori, F. Ostovan, S.A. Aziz, and M.S. Mamat, “Effect of milling time on the microstructure, physical and mechanical properties of Al-Al2O3 nanocomposite synthesized by ball milling and powder metallurgy,” Materials (Basel)., vol. 10, no. 11, p. 1232, 2017.
  8.  A. Kennedy et al., “A Definition and Categorization System for Advanced Materials: The Foundation for Risk-Informed Environmental Health and Safety Testing,” Risk Anal., vol. 39, no. 8, pp. 1783–1795, 2019.
  9.  M. Tulinski and M. Jurczyk, “Nanomaterials Synthesis Methods,” in Metrology and Standardization of Nanotechnology, Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2017, pp. 75–98.
  10.  K. Cesarz-Andraczke and A. Kazek-Kęsik, “PEO layers on Mg-based metallic glass to control hydrogen evolution rate,” Bull. Polish Acad. Sci. Tech. Sci., vol. 68, no. 1, pp. 119–124, 2020.
  11.  M. Beniyel, M. Sivapragash, S.C. Vettivel, and P.S. Kumar, “Optimization of tribology parameters of AZ91D magnesium alloy in dry sliding condition using response surface methodology and genetic algorithm,” Bull. Pol. Acad. Sci. Tech. Sci., pp. 1–10, 2021.
  12.  M. Abbasi, S.A. Sajjadi, and M. Azadbeh, “An investigation on the variations occurring during Ni3Al powder formation by mechanical alloying technique,” J. Alloys Compd., vol. 497, no. 1–2, pp. 171–175, May 2010.
  13.  F. Neves, F.M.B. Fernandes, I. Martins, and J.B. Correia, “Parametric optimization of Ti–Ni powder mixtures produced by mechanical alloying,” J. Alloys Compd., vol. 509, pp. S271–S274, Jun. 2011.
  14.  L. Beaulieu, D. Larcher, R. Dunlap, and J. Dahn, “Nanocomposites in the Sn–Mn–C system produced by mechanical alloying,” J. Alloys Compd., vol. 297, no. 1–2, pp. 122–128, Feb. 2000.
  15.  J.S. Benjamin and T.E. Volin, “The mechanism of mechanical alloying,” Metall. Trans., vol. 5, pp. 1929–1934, 1974.
  16.  S. Lesz, J. Kraczla, and R. Nowosielski, “Structure and compression strength characteristics of the sintered Mg–Zn–Ca–Gd alloy for medical applications,” Arch. Civ. Mech. Eng., vol. 18, no. 4, pp. 1288–1299, Sep. 2018.
  17.  S. Lesz, B. Hrapkowicz, M. Karolus, and K. Gołombek, “Characteristics of the Mg-Zn-Ca-Gd alloy after mechanical alloying,” Materials (Basel)., vol. 14, no. 1, pp. 1–14, 2021.
  18.  S. Lesz, T. Tański, B. Hrapkowicz, M. Karolus, J. Popis, and K. Wiechniak, “Characterisation of Mg-Zn-Ca-Y powders manufactured by mechanical milling,” J. Achiev. Mater. Manuf. Eng., vol. 103, no. 2, pp. 49–59, 2020.
  19.  M. Karolus and J. Panek, “Nanostructured Ni-Ti alloys obtained by mechanical synthesis and heat treatment,” J. Alloys Compd., vol. 658, pp. 709–715, Feb. 2016.
  20.  A. Chrobak, V. Nosenko, G. Haneczok, L. Boichyshyn, M. Karolus, and B. Kotur, “Influence of rare earth elements on crystallization of Fe 82Nb2B14RE2 (RE = Y, Gd, Tb, and Dy) amorphous alloys,” J. Non. Cryst. Solids, vol. 357, no. 1, pp. 4–9, Jan. 2011.
  21.  B. Hrapkowicz and S.T. Lesz, “Characterization of Ca 50 Mg 20 Zn 12 Cu 18 Alloy,” Arch. Foundry Eng., vol. 19, no. 1, pp. 75–82, 2019.
  22.  M.K. Datta et al., “Structure and thermal stability of biodegradable Mg–Zn–Ca based amorphous alloys synthesized by mechanical alloying,” Mater. Sci. Eng. B, vol. 176, no. 20, pp. 1637–1643, Dec. 2011.
  23.  J. Zhang et al., “The degradation and transport mechanism of a Mg-Nd-Zn-Zr stent in rabbit common carotid artery: A 20-month study,” Acta Biomater., vol. 69, pp. 372–384, 2018.
  24.  M. Yuasa, M. Hayashi, M. Mabuchi, and Y. Chino, “Improved plastic anisotropy of Mg–Zn–Ca alloys exhibiting high-stretch formability: A first-principles study,” Acta Mater., vol. 65, pp. 207–214, Feb. 2014.
  25.  L.M. Plum, L. Rink, and H. Haase, “The essential toxin: impact of zinc on human health.,” Int. J. Environ. Res. Public Health, vol. 7, no. 4, pp. 1342–65, 2010.
  26.  M. Salahshoor and Y. Guo, “Biodegradable Orthopedic Magnesium-Calcium (MgCa) Alloys, Processing, and Corrosion Performance.,” Mater. (Basel, Switzerland), vol. 5, no. 1, pp. 135–155, Jan. 2012.
  27.  H.S. Brar, M.O. Platt, M. Sarntinoranont, P.I. Martin, and M.V. Manuel, “Magnesium as a biodegradable and bioabsorbable material for medical implants,” Jom, vol. 61, no. 9. pp. 31–34, 2009.
  28.  M. Pogorielov, E. Husak, A. Solodivnik, and S. Zhdanov, “Magnesium-based biodegradable alloys: Degradation, application, and alloying elements,” Interventional Medicine and Applied Science, vol. 9, no. 1. pp. 27–38, 2017.
  29.  N. Hort et al., “Magnesium alloys as implant materials – Principles of property design for Mg–RE alloys,” Acta Biomater., vol. 6, no. 5, pp. 1714–1725, May 2010.
  30.  Y. Kawamura and M. Yamasaki, “Formation and mechanical properties of Mg97Zn1RE2 alloys with long-period stacking ordered structure,” Mater. Trans., vol. 48, no. 11, pp. 2986–2992, 2007.
  31.  C. Liu, Z. Ren, Y. Xu, S. Pang, X. Zhao, and Y. Zhao, “Biodegradable Magnesium Alloys Developed as Bone Repair Materials: A Review,” Scanning, vol. 2018. p. 9216314, 2018.
  32.  S. Seetharaman, S. Tekumalla, B. Lalwani, H. Patel, N.Q. Bau, and M. Gupta, “Microstructure and Mechanical Properties New Magnesium- Zinc-Gadolinium Alloys,” in Magnesium Technology 2016, Cham: Springer International Publishing, 2016, pp. 159–163.
  33.  S. Seetharaman et al., “Effect of erbium modification on the microstructure, mechanical and corrosion characteristics of binary Mg-Al alloys,” J. Alloys Compd., vol. 648, pp. 759–770, Jul. 2015.
  34.  R. Ahmad, N.A. Wahab, S. Hasan, Z. Harun, M.M. Rahman, and N.R. Shahizan, “Effect of erbium addition on the microstructure and mechanical properties of aluminium alloy,” in Key Engineering Materials, 2019, vol. 796, pp. 62–66.
  35.  C.L. Chen and Y.M. Dong, “Effect of mechanical alloying and consolidation process on microstructure and hardness of nanostructured Fe-Cr-Al ODS alloys,” Mater. Sci. Eng. A, vol. 528, no. 29–30, pp. 8374–8380, Nov. 2011.
  36.  K. Kowalski, M. Nowak, J. Jakubowicz, and M. Jurczyk, “The Effects of Hydroxyapatite Addition on the Properties of the Mechanically Alloyed and Sintered Mg-RE-Zr Alloy,” J. Mater. Eng. Perform., vol. 25, no. 10, pp. 4469–4477, Oct. 2016.
  37.  L.A. Dobrzański, B. Tomiczek, G. Matula, and K. Gołombek, “Role of Halloysite Nanoparticles and Milling Time on the Synthesis of AA 6061 Aluminium Matrix Composites,” Adv. Mater. Res., vol. 939, pp. 84–89, May 2014.
  38.  J. Dutkiewicz, S. Schlueter, and W. Maziarz, “Effect of mechanical alloying on structure and hardness of TiAl-V powders,” in Journal of Metastable and Nanocrystalline Materials, 2004, vol. 20–21, pp. 127–132.






DOI: 10.24425/bpasts.2021.137587 ; ISSN 2300-1917


Bulletin of the Polish Academy of Sciences: Technical Sciences; 2021; e137587