TitleEvaluation of the unit weight of organic soils from a CPTM using an Artificial Neural Networks
Journal titleArchives of Civil Engineering
AffiliationStraż, Grzegorz : Rzeszow University of Technology, Faculty of Civil and Environmental Engineering and Architecture Civil Engineering, Powstańców Warszawy 12 Av., 35-959 Rzeszow, Poland ; Borowiec, Artur : Rzeszow University of Technology, Faculty of Civil and Environmental Engineering and Architecture Civil Engineering, Powstańców Warszawy 12 Av., 35-959 Rzeszow, Poland
Keywordssoil unit weight ; artificial neural networks ; organic soils ; organic content ; cone penetration test
Divisions of PASNauki Techniczne
PublisherWARSAW UNIVERSITY OF TECHNOLOGY FACULTY OF CIVIL ENGINEERING and COMMITTEE FOR CIVIL ENGINEERING POLISH ACADEMY OF SCIENCES
 EN 1997-1: 2008. Eurocode 7: Geotechnical Design – Part 1: General rules.
 EN 1997-2: 2009. Eurocode 7: Geotechnical Design – Part 2: Ground Investigation and Testing.
 P.K. Robertson, K.L. Cabal, “Guide to Cone Penetration Testing for Geotechnical Engineering”. Gregg Drilling & Testing, Inc, 5-th Edition, 2012.
 Y. Cal, “Soil classification by neural-network”, Adv. Eng. Softw. 22: pp. 95–97, 1995.
 A. Goh, “Empirical design in geotechnics using neural networks”, Geotechnique 45: pp. 709–714, 1995. https://doi.org/10.1680/geot.19126.96.36.1999
 M. Shahin, M. Jaksa, H. Maier, “Artificial neural network applications in geotechnical engineering”, Aust. Geomech. 36: 49–62, 2001.
 N. Nawari, R, Liang, J. Nusairat, “Artificial intelligence techniques for the design and analysis of deep foundations”. Electron. J. Geotech. Eng. 4: pp 1–21, 1999. Available online: http://geotech.civeng.okstate.edu/ejge/ppr9909/index.html (accessed on).
 D. Penumadu, C. Jean-Lou, “Geomaterial modeling using artificial neural networks”, In Artificial Neural Networks for Civil Engineers: Fundamentals and Applications, ASCE: Reston, WV, USA, pp 160–184, 1997.
 C.H. Zhiming, M. Guotao, Z. Ye, Z. Yanjie, H. Hengyang, “The application of artificial neural network in geotechnical engineering”, In Proceedings of the 2018 International Conference on Civil and Hydraulic Engineering (IConCHE 2018), Qingdao, China, 23–25 November 2018; IOP Publishing: Bristol, UK, 2018; http://dx.doi.org/10.1088/1755-1315/189/2/022054
 Z. Wang, Y. Li, “Correction of soil parameters in calculation of embankment settlement using a BP network back-analysis model”, Eng. Geol. 91: pp. 168–177, 2007. https://doi.org/10.1016/j.enggeo.2007.01.007
 M.J. Sulewska, “Applying Artificial Neural Networks for analysis of geotechnical problems”, Comput. Assist. Methods Eng. Sci. 18: pp. 230–241, 2011.
 M.J. Sulewska, “Artificial Neural modeling of compaction characteristics of cohesionless soil”, Comput. Assist. Methods Eng. Sci. 17: pp. 27–40, 2010.
 M.J. Sulewska, “Artificial Neural Networks in the Evaluation of Non-Cohesive Soil Compaction Parameters”, Committee Civil Engineering of the Polish Academy of Sciences: Warsaw, Poland, 2009.
 M.J. Sulewska, “Prediction Models for Minimum and Maximum Dry Density of Non-Cohesive Soils”, Pol. J. Environ. Stud. 19: pp. 797–804, 2010.
 M. Ochmański, J. Bzówka, “Selected examples of the use of artificial neural networks in geotechnics”, Civ. Environ. Eng. 4: pp. 287–294, 2013.
 A. Borowiec, K. Wilk, “Prediction of consistency parameters of fen soils by neural networks”, Comput. Assist. Methods Eng. Sci.21: pp. 67–75, 2014.
 M. Kłos, M.J. Sulewska, Z. Waszczyszyn, “Neural identification of compaction characteristics for granular soils”, Comput. Assist. Methods Eng. Sci.18: pp. 265–273, 2011.
 G. Wrzesiński, M.J. Sulewska, Z. Lechowicz, “Evaluation of the Change in Undrained Shear Strength in Cohesive Soils due to Principal Stress Rotation Using an Artificial Neural Network”, Appl. Sci. 8: p. 781, 2018. https://doi.org/10.3390/app8050781
 Z. Lechowicz, M. Fukue, S. Rabarijoely, M.J. Sulewska, “Evaluation of the Undrained Shear Strength of Organic Soils from a Dilatometer Test Using Artificial Neural Networks”, Appl. Sci. 8: p. 1395, 2018. https://doi.org/10.3390/app8081395
 S. Rabarijoely, “A new Approach to the Determination of Mineral and Organic Soil Types Based on Dilatometer Tests (DMT)”, Appl. Sci.8 (11):, p. 2249, 2018. https://doi.org/10.3390/app8112249
 G. Straż, A. Borowiec, “Estimating the Unit Weight of Local Organic Soils from Laboratory Tests Using Artificial Neural Networks”, Appl. Sci. 10 (7): p. 2261, 2020. http://dx.doi.org/10.3390/app10072261
 Voivodship Inspectorate for Environmental Protection in Rzeszów, “Report on the state of the environment of the Podkarpackie Voivodeship in 2013–2015”, Environmental Monitoring Library, Rzeszow, 2016.
 Geotech, Ltd. Department of Geological Services Design and Construction and the Environment, “Geological and Engineering Geological Conditions for Recognition – Engineering for the Construction of Multi-Storey Building at UL; Witolda in Rzeszów”: Rzeszow, Poland, 2010.
 PN-EN ISO 17892-2:2014. Geotechnical Investigation and Testing – Laboratory Testing of Soil – Part 2: Determination of Bulk Density.
 PN-EN ISO 22476-12:2009. Geotechnical Investigation and Testing – Field Testing – Part 12: Mechanical Cone Penetration Test.
 L. Wysokiński, W. Kotlicki, T. Godlewski, “Geotechnical design according to Eurocode 7”, Guide. ITB, Warsaw, 2011.
 P.W. Mayne, G.J. Rix, “Correlations Between Shear Wave Velocity and Cone Tip Resistance in Clays”, Soils and Foundations 35 (2): pp. 107–110, 1995.
 P.W. Mayne, “The 2nd James K. Mitchell Lecture: Undisturbed Sand Strength from Seismic Cone Tests,” Geomechanics and Geoengineering Vol. 1, No. 4: pp. 239–247, 2006.
 P.W. Mayne, “Cone Penetration Testing”, “A Synthesis of Highway Practice”, NCHRP Synthesis 368; Transportation Research Board: Washington, DC, USA, 2007.
 P.W. Mayne, J. Peuchen, D. Bouwmeester, “Soil unit weight estimation from CPTs”, In Proceedings of the 2nd International Symposium on Cone Penetration Testing, Huntington Beach, CA, USA, 9–11 May, pp 169–176, 2010.
 P.W. Mayne, “Evaluating effective stress parameters and undrained shear strengths of soft-firm clays from CPTu and DMT”, Geotechnical and Geophysical Site Characterisation 5 – Lehane, Acosta-Martínez & Kelly (Eds) © Australian Geomechanics Society, Sydney, Australia, 2016.
 P. Robertson, K. Cabal, “Estimating soil unit weight from CPT”, In Proceedings of the 2nd International
 Symposium on Cone Penetration Testing, Huntington Beach, CA, USA, 9–11 May, 2010.
 A.T. Ozer, S.F. Bartlett, E.C. Lawton, “CPTU and DMT for estimating soil unit weight of Lake Bonneville Clay”, Geotechnical and Geophysical Site Characterization 4: pp. 291–296, 2012.
 R.K. Ghanekar, “Unit weight estimation from CPT for Indian offshore soft calcareous clay”, in: “CPTU and DMT in soft clays and organic soils” (eds. Z. Młynarek and J. Wierzbicki), Exlemplum Press, Poznań, Poland, pp. 31–44, 2014.
 M.S. Kovacevic, K.G. Gavin, C. Reale, L. Libric, “The use of neural networks to develop CPT correlations for soils in northern Croatia”, Cone Penetration Testing 2018 – Hicks, Pisano & Peuchen (eds), Delft University of Technology, June 2018, The Netherlands.
 G. Straż, “Estimating soil unit weight from CPT for selected organic soils”, in: “Selected technical, economic and ecological aspects of contemporary construction” (eds. K. Pujer), Exante, pp. 63–77, 2016.
 S.O. Haykin, “Neural Networks and Learning Machines”, 3rd ed.; Pearson Education: Upper Saddle River, NJ, USA, 798, 2009.
 M.T. Hagan, H.B. Demuth, M.H. Beale, “Neural Network Design”, PWS Publishing: Boston, MA, USA, 1996.
 D. Marquardt, “An Algorithm for Least-Squares Estimation of Nonlinear Parameters”, SIAM J. Appl. Math.3: 11, pp. 431–441, 1963.
 M.T. Hagan, M. Menhaj, “Training feed-forward networks with the Marquardt algorithm”. IEEE Trans. Neural Netw. 5: pp. 989–993, 1994.
 J.E. Dennis, R.B. Schnabel, “Numerical Methods for Unconstrained Optimization and Nonlinear Equations”, Prentice-Hall: Englewood Clis, NJ, USA, 1983.
 D.J.C. MacKay, “Bayesian interpolation”, Neural Comput.4: pp. 415–447, 1992.
 Beale, M.H.; Hagan, M.T.; Demuth, H.B.Neural Network ToolboxUser’s Guide; TheMathWorks: Natick, MA,USA, 2010.
 GEO5. Geotechnical software. Fine – Civil Engineering Softwere. https://www.finesoftware.pl/.
 Statistica 13.3. TIBCO Software Inc. https://www.statsoft.pl/Czytelnia .
Publication Ethics PolicyETHICS POLICY
”Archives of Civil Engineering” respects and promotes the principles of publishing ethics. Being guided by COPE’s Guidelines ( https://publicationethics.org/resources/guidelines) we ensure that all participants of the publishing process comply with these rules, the journal pays special attention to:
1. Qualifying individual manuscripts for publication only on the basis of: (a) compliance with the guidelines provided to the authors, (b) substantive value, (c) originality, (d) transparency of presentation
2. Deciding whether the paper fulfills all requirements i.e. formal and scientific and which articles submitted to the journal should be published. In making these decisions, the editor may be guided by the policies of the journal’s editorial board as well as by legal requirements regarding libel, copyright infringement, and plagiarism.
3. Evaluating manuscripts for intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the author(s).
4. Ensuring scientific accuracy and complying with the principle of authorship; making sure that individual authors who contribute to the publication accept its form after the scientific editing
5. Providing a fair and appropriate peer review process.
6. Withdrawing manuscripts from publication, if any information about its unreliability appeared, also as a result of unintentional errors, features of plagiarism or violation of the rules of publishing ethics were identified.
7. Requiring all contributors to disclose relevant competing interests and publish corrections if competing interests are revealed after publication. If needed, other appropriate action should be taken, such as the publication of a retraction or expression of concern.
8. Maintaining the integrity of the academic record, precludes business needs from compromising intellectual and ethical standards, and is always willing to publish corrections, clarifications, retractions, and apologies when needed.
9. Not disclosing any information about a manuscript under consideration to anyone other than the author(s), reviewers and potential reviewers, and in some instances the editorial board members, as appropriate.
1. Cooperating with the scientific editor and / or editorial office and the authors in the field of improving the reviewed material;
2. Being objective and expressing the views clearly with appropriate supporting arguments.
3. Assessing of the entrusted works in a careful and objective manner, if possible with an assessment of their scientific reliability and with appropriate justification of the comments submitted;
4. identifying relevant published work that has not been cited by the authors
5. calling to the editor's attention any substantial similarity or overlap between the manuscript under consideration and any other published data of which they have personal knowledge
6. Maintaining the principle of fair play, excluding personal criticism of the author (s)
7. Maintaining confidentiality, which is not showing or discussing with others except those authorized by the editor. Any manuscripts received for review are treated as confidential documents.
8. Performing a review within the set time limit or accepting another solution jointly with ACE in the event of failure to meet this deadline.
9. Notifying the editor if the invited reviewer feels unqualified to review the manuscript or knows that its timely review will be impossible.
10. identifying relevant published work that has not been cited by the authors
11. Not considering evaluating manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the submission.
1. Results of original research should present an accurate account of the work performed as well as an objective discussion of its significance. Underlying data should be represented accurately in the manuscript. A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behaviour and are unacceptable.
2. The authors should follow the principle of originality, which is submitting only their own original works, and in the case of using the works of other authors, marking them in accordance with the rules of quotation, or obtaining consent for the publication of previously published materials from their owners or administrators;
3. An author should not in general publish manuscripts describing essentially the same research in more than one journal or primary publication. Parallel submission of the same manuscript to more than one journal constitutes unethical publishing behaviour and is unacceptable.
4. Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study and phenomena such as ghostwriting or guest authorship in the event of their detection must be actively counteracted.
5. All authors should report in a Reliable manner the sources they used to create their own study and their inclusion in the attachment bibliography;
6. All those who have made significant contributions should be listed as co-authors. Where there are others who have participated in certain substantive aspects of the research project, they should be named in an Acknowledgement section.
7. The corresponding author should ensure that all appropriate co-authors (according to the above definition) and no inappropriate co-authors are included in the author list of the manuscript, and that all co-authors have seen and approved the final version of the paper and have agreed to its submission for publication.
8. All authors should disclose in their manuscript any financial or other substantive conflict of interest that might be construed to influence the results or their interpretation in the manuscript. All sources of financial support for the project should be disclosed.
9. When an author discovers a significant error or inaccuracy in his/her own published work, it is the author’s obligation to promptly notify the journal’s editor or publisher and cooperate with them to either retract the paper or to publish an appropriate erratum.
In cases of alleged or proven scientific misconduct, fraudulent publication or plagiarism the publisher, in close collaboration with the editors, will take all appropriate measures to clarify the situation and to amend the article in question. This includes the prompt publication of an erratum or, in the most severe cases, the complete retraction of the affected work.
Peer-review ProcedureManuscript Peer-Review Procedure
”Archives of Civil Engineering” makes sure to provide transparent policies for peer-review, and reviewers have an obligation to conduct reviews in an ethical and accountable manner. There is clear communication between the journal and the reviewers which facilitates consistent, fair, and timely review.
-The model of peer-review is double-blind: the reviewers do not know the names of the authors, and the authors do not know who reviewed their manuscript (but if the research is published reviewers can eventually know the names of the authors). A complete list of reviewers is published in a traditional version of the journal: in-print.
-It is the editor who appoints two reviewers; however, if there are discrepancies in the assessment the third reviewer can be appointed.
-After having accepted to review the manuscript (one-week deadline), the reviewers have approximately 6 weeks to finish the process.
-The paper is published in ACE provided that the reviews are positive. All manuscripts receive grades from 1-5, 5 being positive, 1 negative, the authors receive reviews to read and consider the comments.
-Manuscript evaluations are assigned one of five outcomes: accept without changes, accept after changes suggested by the reviewer, rate manuscript once again after major changes and another review, reject, withdraw.
-Manuscripts requiring minor revision (accept after changes suggested by the reviewer) does not require a second review. All manuscripts receiving a "Rate manuscript once again after major changes and another review " evaluation must be subjected to a second review. Rejected manuscripts are given no further consideration. There are cases when the article can be withdrawn, often upon the request of an author, technical reason (e.g. names of authors are placed in the text, lack of references, or inappropriate structure of the text), or plagiarism.
-The revised version of the manuscript should be uploaded to the Editorial System within six weeks. If the author(s) failed to make satisfactory changes, the manuscript is rejected.
-On acceptance, manuscripts are subject to editorial amendment to suit house style.
-Paper publication requires the author's final approval.
- As soon as the publication appears in print and in electronic forms on the Internet there is no possibility to change the content of the article.
-The editor decides whether the paper fulfills all requirements i.e. formal and scientific and which articles submitted to the journal should be published.
-In making these decisions, the editor may be guided by the policies of the journal’s editorial board as well as by legal requirements regarding libel, copyright infringement, and plagiarism.
-The editor maintains the integrity of the academic record, precludes business needs from compromising intellectual and ethical standards, and is always willing to publish corrections, clarifications, retractions, and apologies when needed.
-The editor evaluates manuscripts for intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the author(s).
-The editor does not disclose any information about a manuscript under consideration to anyone other than the author(s), reviewers and potential reviewers, and in some instances the editorial board members, as appropriate.
Any manuscripts received for review are treated as confidential documents. They must not be shown to or discussed with others except if authorized by the editor. Privileged information or ideas obtained through peer review is kept confidential and not used for personal advantage Any invited reviewer who feels unqualified to review the manuscript or knows that its timely review will be impossible should immediately notify the editor so that alternative reviewers can be contacted. Reviewers should identify relevant published work that has not been cited by the authors. Any statement that an observation, derivation, or argument had been previously reported should be accompanied by the relevant citation. A reviewer should also call to the editor's attention any substantial similarity or overlap between the manuscript under consideration and any other published data of which they have personal knowledge. Reviewers should not consider evaluating manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the submission. Reviews should be conducted objectively. Personal criticism of the author is unacceptable. Referees should express their views clearly with appropriate supporting arguments. All reviews must be carried out on a special form available in the Editorial System.