Details

Title

Wear and surface characteristics on tool performance with CVD coating of Al2O3/TiCN inserts during machining of Inconel 718 alloys

Journal title

Archive of Mechanical Engineering

Yearbook

Ahead of print

Affiliation

Agari, Shailesh Rao : Department of Industrial and Production Engineering, The National Institute of Engineering, Mysuru, Karnataka, India

Authors

Keywords

chip morphology ; tool wear ; surface roughness ; super alloy - Inconel 717

Divisions of PAS

Nauki Techniczne

Publisher

Polish Academy of Sciences, Committee on Machine Building

Bibliography

[1] R.M. Arunachalam, M.A. Mannan, and A.C. Spowage. Surface integrity when machining age hardened Inconel 718 with coated carbide cutting tools. International Journal of Machine Tools and Manufacture, 44(14):1481–1491, 2004. doi: 10.1016/j.ijmachtools.2004.05.005.
[2] L. Li, N. He, M.Wang, and Z.G.Wang. High-speed cutting of Inconel 718 with coated carbide and ceramic inserts. Journal of Materials Processing Technology, 129(1–3):127–130, 2002. doi: 10.1016/S0924-0136(02)00590-3.
[3] E.O. Ezugwu. Key improvements in the machining of difficult-to-cut aerospace superalloys. International Journal of Machine Tools and Manufacture, 45(12–13):1353–1367, 2005. doi: 10.1016/j.ijmachtools.2005.02.003.
[4] T. Kitagawa, A. Kubo, and K. Maekawa. Temperature and wear of cutting tools in high-speed machining of Inconel and Ti–6Al–6V–2Sn. Wear, 202(2):142–148, 1997. doi: 10.1016/S0043-1648(96)07255-9.
[5] S. Chinchanikar, S.S. Kore, and P. Hujare. A review on nanofluids in minimum quantity lubrication machining. Journal of Manufacturing Processes, 68(A):56–70, 2021. doi: 10.1016/j.jmapro.2021.05.028.
[6] A.C. Okafor and T.O. Nwoguh. Comparative evaluation of soybean oil–based MQL flow rates and emulsion flood cooling strategy in high-speed face milling of Inconel 718. The International Journal of Advanced Manufacturing Technology, 107(9–10):3779–3793, 2020. doi: 10.1007/s00170-020-05248-3.
[7] J. Kaminski and B. Alvelid. Temperature reduction in the cutting zone in water-jet assisted turning. Journal of Materials Processing Technology, 106(1–3):68–73, 2000. doi: 10.1016/S0924-0136(00)00640-3.
[8] A. Marques, M. Paipa Suarez, W. Falco Sales, and Á. Rocha Machado. Turning of Inconel 718 with whisker-reinforced ceramic tools applying vegetable-based cutting fluid mixed with solid lubricants by MQL. Journal of Materials Processing Technology, 266:530–543, 2019. doi: 10.1016/j.jmatprotec.2018.11.032.
[9] A. Suárez, L.N. López de Lacalle, R. Polvorosa, F. Veiga, and A. Wretland. Effects of highpressure cooling on the wear patterns on turning inserts used on alloy IN718. Materials and Manufacturing Processes, 32(6):678–686, 2017. doi: 10.1080/10426914.2016.1244838.
[10] R. Polvorosa, A. Suárez, L.N. López de Lacalle, I. Cerrillo, A. Wretland, and F. Veiga: Tool wear on nickel alloys with different coolant pressures: Comparison of Alloy 718 andWaspaloy. Journal of Manufacturing Processes, 26:44–56, 2017. doi: 10.1016/j.jmapro.2017.01.012.
[11] A.R.C. Sharman, J.I. Hughes, and K. Ridgway. Surface integrity and tool life when turning Inconel 718 using ultra-high pressure 786 and flood coolant systems. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222(6):653–664, 2008. doi: 10.1243/09544054JEM936.
[12] W.H. Pereira and S. Delijaicov. Surface integrity of Inconel 718 turned under cryogenic conditions at high cutting speeds. The International Journal of Advanced Manufacturing Technology, 104:2163–2177, 2019. doi: 10.1007/s00170-019-03946-1.
[13] H. González, O. Pereira, L.N. López de Lacalle, A. Calleja, I. Ayesta, and J. Muñoa. Flankmilling of integral blade rotors made in Ti6Al4V using cryo CO2 and minimum quantity lubrication. ASME. Journal of Manufacturing Science and Engineering, 143(9):091011, 2021. doi: 10.1115/1.4050548.
[14] A. Devillez, F. Schneider, S. Dominiak, D. Dudzinski, and D. Larrouquere. Cutting forces and wear in dry machining of Inconel 718 with coated carbide tools. Wear, 262(7–8):931–942, 2007. doi: 10.1016/j.wear.2006.10.009.
[15] N.R. Dhar, M.W. Islam, S. Islam, and M.A.H. Mithu. The influence of minimum quantity of lubrication (MQL) on cutting temperature, chip and dimensional accuracy in turning AISI- 1040 steel. Journal of Materials Processing Technology, 171(1):93–99, 2006. doi: 10.1016/j.jmatprotec.2005.06.047.
[16] D. Dudzinski, A. Devillez, A. Moufki, D. Larrouquère,V. Zerrouki, and J. Vigneau. A review of developments towards dry and high speed machining of Inconel 718 alloy. International Journal of Machine Tools and Manufacture, 44(4):439–456, 2004. doi: 10.1016/S0890-6955(03)00159-7.
[17] I.A. Choudhury and M.A. El-Baradie. Machining nickel base super alloys: Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 212(3):195–206, 1998. doi: 10.1243/0954405981515617.
[18] S.K. Thandra and S.K. Choudhury. Effect of cutting parameters on cutting force, surface finish and tool wear in hot machining. International Journal of Machining and Machinability of Materials, 7(3-4):260–273, 2010. doi: 10.1504/IJMMM.2010.033070.
[19] L.N. Lopez de Lacalle, J.A. Sanchez, A. Lamikiz, and A. Celaya. Plasma assisted milling of heatresistant superalloys. ASME Journal of Manufacturing Science and Engineering, 126(2):274– 285, 2016. doi: 10.1115/1.1644548.
[20] M.C. Shaw. Metal Cutting Principles. Clarendon, Oxford, 1984.
[21] E.O. Ezugwu, J. Bonney, and Y. Yamane. An overview of the machinability of aeroengine alloys. Journal of Materials Processing Technology, 134(2):233–253, 2003. doi: 10.1016/S0924-0136(02)01042-7.
[22] A. Jawaid, S. Koksal, and S. Sharif. Wear behavior of PVD and CVD coated carbide tools when face milling Inconel 718. Tribology Transactions, 43(2):325–331, 2000. doi: 10.1080/10402000008982347.
[23] T. Sugihara, H. Tanaka, and T. Enomoto. Development of novel CBN cutting tool for high speed machining of Inconel 718 focusing on coolant behaviors. Procedia Manufacturing, 10:436–442, 2017. doi: 10.1016/j.promfg.2017.07.021.
[24] G.A. Ibrahim, C.H.C. Haron, J.A. Ghani, A.Y.M. Said, and M.Z.A. Yazid. Performance of PVD-coated carbide tools when turning Inconel 718 in dry machining. Advances in Mechanical Engineering, 3:790975, 2011. doi: 10.1155/2011/790975.
[25] Z.P. Hao, Y.H. Fan, J.Q. Lin, and Z.X Yu. Wear characteristics and wear control method of PVD-coated carbide tool in turning Inconel 718. The International Journal of Advanced Manufacturing Technology, 78(5–8):1329–1336, 2015. doi: 10.1007/s00170-014-6752-0.
[26] B. Zhang, M.J. Njora, and Y. Sato. High-speed turning of Inconel 718 by using TiAlN- and (Al, Ti) N-coated carbide tools. The International Journal of Advanced Manufacturing Technology, 96(5–8):2141–2147, 2018. doi: 10.1007/s00170-018-1765-8.
[27] F. Zemzemi, J. Rech, W.B. Salem, A. Dogui, and P. Kapsa. Identification of friction and heat partition model at the tool-chip-workpiece interfaces in dry cutting of an Inconel 718 alloy with CBN and coated carbide tools. Advances in Manufacturing Science and Technology, 38(1):5-22, 2014. doi: 10.2478/amst-2014-0001.
[28] W. Grzesik, J. Małecka, Z. Zalisz, K. Zak, and P. Niesłony. Investigation of friction and wear mechanisms of TiAlV coated carbide against Ti6Al4V Titanium alloy using pin-on-disc tribometer. Archive of Mechanical Engineering, 63(1):114-127, 2016. doi: 10.1515/meceng-2016-0006.
[29] V. Bushlya, F. Lenrick, A. Bjerke, H. Aboulfadl, M. Thuvander; J.-E. Ståhl, and R. M’Saoubi: Tool wear mechanisms of PcBN in machining Inconel 718: Analysis across multiple length scale. CIRP Annals, 70(1):73–78, 2021. doi: 10.1016/j.cirp.2021.04.008.
[30] A.R.F. Oliveira, L.R.R. da Silva, V. Baldin, M.P.C. Fonseca, R.B. Silva, and A.R. Machado: Effect of tool wear on the surface integrity of Inconel 718 in face milling with cemented carbide tools. Wear, 476:203752, 2021. doi: 10.1016/j.wear.2021.203752.
[31] A.K.M.N. Amin, S.A. Sulaiman, and M.D. Arif. Development of mathematical model for chip serration frequency in turning of stainless steel 304 using RSM. Advanced Materials and Process Technology, 217-219:2206–2209, 2012. doi: .
[32] J. Hua, and R. Shivpuri. Prediction of chip morphology and segmentation during the machining of titanium alloys. Journal of Materials Processing Technology, 150(1-2):124–133, 2004. doi: 10.1016/j.jmatprotec.2004.01.028.
[33] K. Lin, W. Wang, R. Jiang and Y. Xiong. Effect of tool nose radius and tool wear on residual stresses distribution while turning in situ TiB2/7050Al metal matrix composites. The International Journal of Advanced Manufacturing Technology, 100:143–151, 2019. doi: 10.1007/s00170-018-2742-y.
[34] K. Mahesh, J.T. Philip, S.N. Joshi and B. Kuriachen. Machinability of Inconel 718: A critical review on the impact of cutting temperatures. Materials and Manufacturing Processes, 36(7):753–791, 2021. doi: 10.1080/10426914.2020.1843671.
[35] V. Sivalingam Y. Zhao, R. Thulasiram, J. Sun, G. Kai, and T. Nagamalai. Machining behaviour, surface integrity and tool wear analysis in environment friendly turning of Inconel 718 alloy. Measurement,174:109028, 2021. doi: 10.1016/j.measurement.2021.109028.
[36] Z. Peng, X. Zhang, and D. Zhang. Performance evaluation of high-speed ultrasonic vibration cutting for improving machinability of Inconel 718 with coated carbide tools. Tribology International, 155:106766, 2021. doi: 10.1016/j.triboint.2020.106766.
[37] D.G. Flom, R. Komanduri, and M. Lee. High-speed machining of metals. Annual Review of Material Science, 14:231–278, 1984. doi: 10.1146/annurev.ms.14.080184.001311.
[38] N.L. Bhirud and R.R. Gawande. Optimization of process parameters during end milling and prediction of work piece temperature rise. Archive of Mechanical Engineering, 64(3):327–346, 2017. doi: 10.1515/meceng-2017-0020.
[39] R.S. Pawade, S.S. Joshi, P.K. Brahmankar, and M. Rahman. An investigation of cutting forces and surface damage in high-speed turning of Inconel 718. J ournal of Materials Processing Technology, 192-193:139–146, 2007. doi: 10.1016/j.jmatprotec.2007.04.049.
[40] A. Shokrani, V. Dhokia, and S.T. Newman. Environmentally conscious machining of difficultto- machine materials with regard to cutting fluids. International Journal of Machine Tools and Manufacture, 57:83–101, 2012. doi: 10.1016/j.ijmachtools.2012.02.002.
[41] Y.S. Liao, H.M. Lin, and J.H. Wang. Behaviors of end milling Inconel 718 superalloy by cemented carbide tools. Journal of Materials Processing Technology, 201(1–3):460–465, 2008. doi: 10.1016/j.jmatprotec.2007.11.176.
[42] R. Komanduri and T.A. Schroeder. On shear instability in machining a nickel-iron base superalloy. Journal of Engineering for Industry, 108(2):93–100. 1986. doi: 10.1115/1.3187056.
[43] R. Rakesh and S. Datta. Machining of Inconel 718 using coated wc tool: effects of cutting speed on chip morphology and mechanisms of tool wear. Arabian Journal for Science and Engineering, 45:797–816, 2020. doi: 10.1007/s13369-019-04171-4.
[44] S. Belhadi, T. Mabrouki, J.F. Rigal, and L. Boulanouar. Experimental and numerical study of chip formation during straight turning of hardened AISI 4340 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 219(7):515– 524, 2005. doi: 10.1243/095440505X32445.
[45] A. Thakur and S. Gangopadhyay. Evaluation of micro-features of chips of Inconel 825 during dry turning with uncoated and chemical vapour deposition multilayer coated tools. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(6):979–994, 2018. doi: 10.1177/0954405416661584.
[46] M. Rahman,W.K.H. Seah, and T.T. Teo. The machinability of Inconel 718. Journal of Materials Processing Technology, 63(1–3):199–204, 1997. doi: 10.1016/S0924-0136(96)02624-6.
[47] S.P. Sahoo and S. Datta. Dry machining performance of AA7075-T6 alloy using uncoated carbide and MT-CVD TiCN-Al2O3 coated carbide Inserts. Arabian Journal of Science and Engineering,45:9777–9791, 2020. doi: 10.1007/s13369-020-04947-z.
[48] H.Z. Li, H. Zeng, and X.Q. Chen. An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts. Journal of Materials Processing Technology, 180(1–3):296–304, 2006. doi: 10.1016/j.jmatprotec.2006.07.009.

Date

1.12.2021

Type

Ahead of print

Identifier

DOI: 10.24425/ame.2021.139647 ; ISSN 0004-0738, e-ISSN 2300-1895

Reviewers


The Editorial Board of the Archive of Mechanical Engineering (AME) sincerely expresses gratitude to the following individuals who devoted their time to review papers submitted to the journal. Particularly, we express our gratitude to those who reviewed papers several times.

List of reviewers of volume 68 (2021)
Ahmad ABDALLA – Huaiyin Institute of Technology, China
Sara ABDELSALAM – University of California, Riverside, United States
Muhammad Ilman Hakimi Chua ABDULLAH – Universiti Teknikal Malaysia Melaka, Malaysia
Hafiz Malik Naqash AFZAL – University of New South Wales, Sydney, Australia
Reza ANSARI – University of Guilan, Rasht, Iran
Jeewan C. ATWAL – Indian Institute of Technology Delhi, New Delhi, India
Hadi BABAEI – Islamic Azad University, Tehran, Iran
Sakthi BALAN – K. Ramakrishnan college of Engineering, Trichy, India
Leszek BARANOWSKI – Military University of Technology, Warsaw, Poland
Elias BRASSITOS – Lebanese American University, Byblos, Lebanon
Tadeusz BURCZYŃSKI – Institute of Fundamental Technological Research, Warsaw, Poland
Nguyen Duy CHINH – Hung Yen University of Technology and Education, Hung Yen, Vietnam
Dorota CHWIEDUK – Warsaw University of Technology, Poland
Adam CISZKIEWICZ – Cracow University of Technology, Poland
Meera CS – University of Petroleum and Energy Studies, Duhradun, India
Piotr CYKLIS – Cracow University of Technology, Poland
Abanti DATTA – Indian Institute of Engineering Science and Technology, Shibpur, India
Piotr DEUSZKIEWICZ – Warsaw University of Technology, Poland
Dinesh DHANDE – AISSMS College of Engineering, Pune, India
Sufen DONG – Dalian University of Technology, China
N. Godwin Raja EBENEZER – Loyola-ICAM College of Engineering and Technology, Chennai, India
Halina EGNER – Cracow University of Technology, Poland
Fehim FINDIK – Sakarya University of Applied Sciences, Turkey
Artur GANCZARSKI – Cracow University of Technology, Poland
Peng GAO – Northeastern University, Shenyang, China
Rafał GOŁĘBSKI – Czestochowa University of Technology, Poland
Andrzej GRZEBIELEC – Warsaw University of Technology, Poland
Ngoc San HA – Curtin University, Perth, Australia
Mehmet HASKUL – University of Sirnak, Turkey
Michal HATALA – Technical University of Košice, Slovak Republic
Dewey HODGES – Georgia Institute of Technology, Atlanta, United States
Hamed HONARI – Johns Hopkins University, Baltimore, United States
Olga IWASINSKA – Warsaw University of Technology, Poland
Emmanuelle JACQUET – University of Franche-Comté, Besançon, France
Maciej JAWORSKI – Warsaw University of Technology, Poland
Xiaoling JIN – Zhejiang University, Hangzhou, China
Halil Burak KAYBAL – Amasya University, Turkey
Vladis KOSSE – Queensland University of Technology, Brisbane, Australia
Krzysztof KUBRYŃSKI – Air Force Institute of Technology, Warsaw, Poland
Waldemar KUCZYŃSKI – Koszalin University of Technology, Poland
Igor KURYTNIK – State Higher School in Oswiecim, Poland
Daniel LESNIC – University of Leeds, United Kingdom
Witold LEWANDOWSKI – Gdańsk University of Technology, Poland
Guolu LI – Hebei University of Technology, Tianjin, China
Jun LI – Xi’an Jiaotong University, China
Baiquan LIN – China University of Mining and Technology, Xuzhou, China
Dawei LIU – Yanshan University, Qinhuangdao, China
Luis Norberto LÓPEZ DE LACALLE – University of the Basque Country, Bilbao, Spain
Ming LUO – Northwestern Polytechnical University, Xi’an, China
Xin MA – Shandong University, Jinan, China
Najmuldeen Yousif MAHMOOD – University of Technology, Baghdad, Iraq
Arun Kumar MAJUMDER – Indian Institute of Technology, Kharagpur, India
Paweł MALCZYK – Warsaw University of Technology, Poland
Miloš MATEJIĆ – University of Kragujevac, Serbia
Norkhairunnisa MAZLAN – Universiti Putra Malaysia, Serdang, Malaysia
Dariusz MAZURKIEWICZ – Lublin University of Technology, Poland
Florin MINGIREANU – Romanian Space Agency, Bucharest, Romania
Vladimir MITYUSHEV – Pedagogical University of Cracow, Poland
Adis MUMINOVIC – University of Sarajevo, Bosnia and Herzegovina
Baraka Olivier MUSHAGE – Université Libre des Pays des Grands Lacs, Goma, Congo (DRC)
Tomasz MUSZYŃSKI – Gdansk University of Technology, Poland
Mohamed NASR – National Research Centre, Giza, Egypt
Driss NEHARI – University of Ain Temouchent, Algeria
Oleksii NOSKO – Bialystok University of Technology, Poland
Grzegorz NOWAK – Silesian University of Technology, Gliwice, Poland
Iwona NOWAK – Silesian University of Technology, Gliwice, Poland
Samy ORABY – Pharos University in Alexandria, Egypt
Marcin PĘKAL – Warsaw University of Technology, Poland
Bo PENG – University of Huddersfield, United Kingdom
Janusz PIECHNA – Warsaw University of Technology, Poland
Maciej PIKULIŃSKI – Warsaw University of Technology, Poland
T.V.V.L.N. RAO – The LNM Institute of Information Technology, Jaipur, India
Andrzej RUSIN – Silesian University of Technology, Gliwice, Poland
Artur RUSOWICZ – Warsaw University of Technology, Poland
Benjamin SCHLEICH – Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany
Jerzy SĘK – Lodz University of Technology, Poland
Reza SERAJIAN – University of California, Merced, USA
Artem SHAKLEIN – Udmurt Federal Research Center, Izhevsk, Russia
G.L. SHI – Guangxi University of Science and Technology, Liuzhou, China
Muhammad Faheem SIDDIQUI – Vrije University, Brussels, Belgium
Jarosław SMOCZEK – AGH University of Science and Technology, Cracow, Poland
Josip STJEPANDIC – PROSTEP AG, Darmstadt, Germany
Pavel A. STRIZHAK – Tomsk Polytechnic University, Russia
Vadym STUPNYTSKYY – Lviv Polytechnic National University, Ukraine
Miklós SZAKÁLL – Johannes Gutenberg-Universität Mainz, Germany
Agnieszka TOMASZEWSKA – Gdansk University of Technology, Poland
Artur TYLISZCZAK – Czestochowa University of Technology, Poland
Aneta USTRZYCKA – Institute of Fundamental Technological Research, Warsaw, Poland
Alper UYSAL – Yildiz Technical University, Turkey
Gabriel WĘCEL – Silesian University of Technology, Gliwice, Poland
Marek WĘGLOWSKI – Welding Institute, Gliwice, Poland
Frank WILL – Technische Universität Dresden, Germany
Michał WODTKE – Gdańsk University of Technology, Poland
Marek WOJTYRA – Warsaw University of Technology, Poland
Włodzimierz WRÓBLEWSKI – Silesian University of Technology, Gliwice, Poland
Hongtao WU – Nanjing University of Aeronautics and Astronautics, China
Jinyang XU – Shanghai Jiao Tong University, China
Zhiwu XU – Harbin Institute of Technology, China
Zbigniew ZAPAŁOWICZ – West Pomeranian University of Technology, Szczecin, Poland
Zdzislaw ZATORSKI – Polish Naval Academy, Gdynia, Poland
Wanming ZHAI – Southwest Jiaotong University, Chengdu, China
Xin ZHANG – Wenzhou University of Technology, China
Su ZHAO – Ningbo Institute of Materials Technology and Engineering, China

×