Tytuł artykułuStudy on modeling and production inaccuracies for artillery firing
Tytuł czasopismaArchive of Mechanical Engineering
RocznikAhead of print
AfiliacjeKhalil, Mostafa : Aerospace Engineering Department, Military Technical College, Cairo, Egypt
Słowa kluczoweartillery firing table ; modified point mass ; meteorological messages ; Coriolis effect ; genetic algorithm GA
Wydział PANNauki Techniczne
WydawcaPolish Academy of Sciences, Committee on Machine Building
Bibliografia J.A. Matts and D.H. McCoy. A graphical firing table model and a comparison of the accuracy of three utilization schemes. Report No. BRL-MR-2035, Army Ballistic Research Lab., Aberdeen Proving Ground, MD, U.S., April 1970.
 H.L. Reed Jr. Firing table computations on the ENIAC. In Proceeding of the 1952 ACM national meeting (Pittsburgh), pages 103-106, Pennsylvania, USA, 2 May, 1952. doi: 10.1145/609784.609796.
 E.R. Dickinson. The production of firing tables for cannon artillery. Report No. BRL-R-1371, Army Ballistic Research Lab., Aberdeen Proving Ground, MD, U.S., November 1967.
 S. Gorn and N.L. Juncosa. On the computational procedures for firing and bombing tables. Report No. BRL-R-889, Army Ballistic Research Lab., Aberdeen Proving Ground, MD, U.S., November 1954.
 C. Niekerk, and W. Rossouw. A proposed format for firing tables of a series of carrier projectiles possessing ballistic similarity with a HE projectile. In Proceeding of the 20th International Symposium on Ballistics, pages 187–194, Orlando, USA, 23–27 September, 2002.
 S.A. Ortac, U. Durak, U. Kutluay, K. Kucuk, and M.C. Candan. NABK based next generation ballistic table toolkit. In Proceeding of the 23rd International Symposium on Ballistics, pages 765–774, Tarragona, Spain, 16–20 April, 2007.
 A.J. Sowa. NATO shareable software developing into true suite supporting national operational fire control systems. In Proceeding of the 24th International Symposium on Ballistics, pages 126–133, Louisiana, USA, 22–26 September, 2008.
 Z. Leciejewski, T. Zawada, P. Kowalczuk, J. Szymonik, and P. Czyronis. Selected ballistic aspects of fire control system designed to anti-aircraft gun. In Proceeding of the 28th International Symposium on Ballistics, pages 655–665, Atlanta, USA, 22–26 September, 2014.
 NATO. The Modified Point Mass and five Degrees of Freedom Trajectory Models. Standard No. STANAG-4355, NATO Standardization Agency, Belgium, April 2009.
 M. Khalil, X. Rui, Q. Zha, H. Yu, and H. Hendy. Projectile impact point prediction based on self-propelled artillery dynamics and doppler radar measurements. Advances in Mechanical Engineering, 2013:53913, 2013. doi: 10.1155/2013/153913.
 L. Baranowski. Feasibility analysis of the modified point mass trajectory model for the need of ground artillery fire control systems. Journal of Theoretical and Applied Mechanics, 51(3):511–522, 2013.
 M. Khalil, X. Rui, and H. Hendy. Discrete time transfer matrix method for projectile trajectory prediction. Journal of Aerospace Engineering, 28(2):04014057, 2015. doi: 10.1061/(ASCE)AS.1943- 5525.0000381.
 L. Baranowski. Effect of the mathematical model and integration step on the accuracy of the results of computation of artillery projectile flight parameters. Bulletin of the Polish Academy of Sciences: Technical Sciences, 61(2):475–484, 2013. doi: 10.2478/bpasts-2013-0047.
 A. Szklarski, R. Głębocki, and M. Jacewicz. Impact point prediction guidance parametric study for 155 mm rocket assisted artillery projectile with lateral thrusters. Archive of Mechanical Engineering, 67(1):31–56, 2020. doi: 10.24425/ame.2020.131682.
 M. Aldoegre. Comparison Between Trajectory Models for Firing Table Application. MSc. Thesis, North-West University, Potchefstroom, South Africa, 2019.
 C. Donneaud, R. Cayzac and P. Champigny. Recent developments on aeroballistics of yawing and spinning projectiles: Part II: free flight tests. In Proceeding of the 20th International Symposium on Ballistics, pages 655–665, Orlando, USA, 23–27 September, 2002.
 A. Dupuis, C. Berner, and V. Fleck. Aerodynamic characteristics of a long-range spinning artillery shell: Part 1: from aeroballistic range free-flight tests. In Proceeding of the 21st International Symposium on Ballistics, Adelaide, Australia, 19–23 April, 2004.
 T. Brown, T. Harkins, M. Don, R. Hall, J. Garner, and B. Davis. Development and demonstration of a new capability for aerodynamic characterization of medium caliber projectiles. In Proceedings of the 28th International Symposium on Ballistics, pages 655–665, Atlanta, USA, 22–26 September, 2014.
 W. Zhou. An improved hybrid extended kalman filter based drag coefficient estimation for projectiles. In Proceedings of the 30th International Symposium on Ballistics, pages 80–91, California, USA, 11–15 September, 2017.
 M. Albisser, S. Dobre, C. Decrocq, F. Saada, B. Martinez, and P. Gnemmi. Aerodynamic characterization of a new concept of long range projectiles from free flight data. In Proceeding of the 30th International Symposium on Ballistics, pages 256–267, California, USA, 11–15 September, 2017.
 A. Ishchenko, V. Burkin, V. Faraponov, L. Korolkov, E. Maslov, A. Diachkovskiy, A. Chupashev, and A. Zykova. Determination of extra trajectory parameters of projectile layout motion. Journal of Physics: Conference Series, 919:012010, 2017, 1-5. doi: 10.1088/1742-6596/919/1/012010.
 G. Surdu, I. Vedinaş, G. Slămnoiu, and Ş. Pamfil. Projectile’s drag coefficient evaluation for small finite differences of his geometrical dimensions using analytical methods. In: International Conference of Scientific Paper (AFASES 2015), Brasov, Romania, 28–30 May, 2015.
 R.L. McCoy. Modern Exterior Ballistics: The Launch and Flight Dynamics of Symmetric Projectiles, 2nd ed., Schiffer Publishing, 2009.
 R. H. Whyte. SPIN-73 an Updated Version of the SPINNER Computer Program. Report No. TR-4588, Armament Systems Dept., VT, U.S., November 1973.
 W. Yingbin. The application of ballistic filtering theory in the production of firing tables. Journal of Ballistics, 7(1):65–70, 1995. (in Chinese)
 W. Liang, B. Jiang, and Y. Sa. The application of simple regression method in producing the curve of accommodation coefficient in test for firing table. Journal of of Shanxi Datong University (Natural Science Edition), 26(1):23–25, 2010. (in Chinese)
 C. Xinjun. A study of fitting method for making ground artillery firing tables. Journal of Ballistics, 9(2):76–79, 1997. (in Chinese)
 W.-Q. Huang. A series of base functions for global analytical approach to firing table. Applied Mathematics and Mechanics, 2(5):575–579, 1981. doi: 10.1007/bf01895460.
 N.P. Roberts. Ballistic analysis of firing table data for 155mm, M825 smoke projectile. Report No. BRL-MR-3865, Army Ballistic Research Lab., Aberdeen Proving Ground, MD, U.S., September 1990.
 S. Wu, Q. Kang, L. Fu, and X. Jinxiang. A study on comparing test and its application on the firing table design. Journal of Ballistics, 15(4):22–26, 2003. (in Chinese)
 S. Floroff and B. Salatino. 120-MM Ammunition Feasibility Assessment for Light Artillery. Report No. ARFSD TR 99002, U.S Army Armament Reseach, Development and Engineering Center, NJ, USA, March 2000.
 D.L. Johnson, B.C. Roberts, and W.W. Vaughan. Reference and standard atmosphere models. In Proceedings of the 10th Conference on Aviation, Range and Aerospace Meteorology, Boston, USA, 13–16 May, 2002.
 V. Cech and J. Jevicky. Improved theory of generalized meteo-ballistic weighting factor functions and their use. Defence Technology, 12(3):242–254, 2016. doi: 10.1016/j.dt.2016.01.009.
 V. Cech and J. Jevicky. Improved theory of projectile trajectory reference heights as characteristics of meteo-ballistic sensitivity functions. Defence Technology, 13(3):177–187, 2017. doi: 10.1016/j.dt.2017.04.001.
 G.E. Wood. Test Design Plan (TDP) for the Production Qualification Testing (PQT) of the 81mm M984/M983 High Explosive (HE) Cartridges. Report No. AD-A257 403, U.S Army Materiel Systems Analysis Activity, Aberdeen Proving Ground, MD, U.S., October 1992.
 W. Haifeng, W. Pengxin, W. Long, and D. Lijie. Discussion on the revision of artillery standard firing conditions of our army. Journal of Projectiles, Rockets, Missiles and Guidance, 37(4):153–156, 2017. (in Chinese)
 FT-122-2A18: Firing Tables for Cannon, 122mm Howitzer, 2A18. Former Soviet Union, 1968.
 S. Karel and B. Martin. Conversions of METB3 meteorological messages into the METEO11 format. In Proceedings of the 2017 International Conference on Military Technologies (ICMT), pages 278-284, Brno, Czech Republic, 31 May - 2 Jun, 2017. doi: 10.1109/MILTECHS.2017.7988770.
 FT-155-AM-2: Firing Tables for Cannon, 155mm Howitzer, M185. US Department of the Army, 1983.
 Manual of the ICAO Standard Atmosphere: Extended to 80 Kilometres. International Civil Aviation Organization, 1993.
 K. Šilinger, L. Potužák, and J. Šotnar. Conversion of the METCM into the METEO-11. In Proceedings of the 13th International Conference on Instrumentation, Measurement, Circuits And Systems (IMCAS '14), pages 212–218, Istanbul, Turkey, 15–17 December, 2014.
 Š. Karel, I. Jan, and P. Ladislav. Composition of the METEO11 meteorological message according to abstract of a measured meteorological data. In Proceedings of the 2017 International Conference on Military Technologies (ICMT), pages 194–199, Brno, Czech Republic, 31 May - 2 Jun, 2017. doi: 10.1109/MILTECHS.2017.7988755.
 NATO. Adoption of Standard Ballistic Meteorological Message. Standard No. STANAG 4061, NATO Standardization Agency, Belgium, October 2000.
 B. Karpov and L. Schmidt. The Aerodynamic Properties of the 155-mm Shell M101 from Free flight Range Tests of Full Scale and 1/12 Scale Models. Report No. BRL-MR-1582, Army Ballistic Research Lab., Aberdeen Proving Ground, MD, U.S., June 1964.
 M. Khalil, H. Abdalla, and O. Kamal. Dispersion analysis for spinning artillery projectile. In Proceeding of the 13th International Conference on Aerospace Sciences and Aviation Technology, pages 1-12, Cairo, Egypt, 26–28 May, 2009. doi: 10.21608/asat.2009.23740.
TypAhead of print
IdentyfikatorDOI: 10.24425/ame.2021.139802 ; ISSN 0004-0738, e-ISSN 2300-1895
The Editorial Board of the Archive of Mechanical Engineering (AME) sincerely expresses gratitude to the following individuals who devoted their time to review papers submitted to the journal. Particularly, we express our gratitude to those who reviewed papers several times.
List of reviewers of volume 68 (2021)
Ahmad ABDALLA – Huaiyin Institute of Technology, China
Sara ABDELSALAM – University of California, Riverside, United States
Muhammad Ilman Hakimi Chua ABDULLAH – Universiti Teknikal Malaysia Melaka, Malaysia
Hafiz Malik Naqash AFZAL – University of New South Wales, Sydney, Australia
Reza ANSARI – University of Guilan, Rasht, Iran
Jeewan C. ATWAL – Indian Institute of Technology Delhi, New Delhi, India
Hadi BABAEI – Islamic Azad University, Tehran, Iran
Sakthi BALAN – K. Ramakrishnan college of Engineering, Trichy, India
Leszek BARANOWSKI – Military University of Technology, Warsaw, Poland
Elias BRASSITOS – Lebanese American University, Byblos, Lebanon
Tadeusz BURCZYŃSKI – Institute of Fundamental Technological Research, Warsaw, Poland
Nguyen Duy CHINH – Hung Yen University of Technology and Education, Hung Yen, Vietnam
Dorota CHWIEDUK – Warsaw University of Technology, Poland
Adam CISZKIEWICZ – Cracow University of Technology, Poland
Meera CS – University of Petroleum and Energy Studies, Duhradun, India
Piotr CYKLIS – Cracow University of Technology, Poland
Abanti DATTA – Indian Institute of Engineering Science and Technology, Shibpur, India
Piotr DEUSZKIEWICZ – Warsaw University of Technology, Poland
Dinesh DHANDE – AISSMS College of Engineering, Pune, India
Sufen DONG – Dalian University of Technology, China
N. Godwin Raja EBENEZER – Loyola-ICAM College of Engineering and Technology, Chennai, India
Halina EGNER – Cracow University of Technology, Poland
Fehim FINDIK – Sakarya University of Applied Sciences, Turkey
Artur GANCZARSKI – Cracow University of Technology, Poland
Peng GAO – Northeastern University, Shenyang, China
Rafał GOŁĘBSKI – Czestochowa University of Technology, Poland
Andrzej GRZEBIELEC – Warsaw University of Technology, Poland
Ngoc San HA – Curtin University, Perth, Australia
Mehmet HASKUL – University of Sirnak, Turkey
Michal HATALA – Technical University of Košice, Slovak Republic
Dewey HODGES – Georgia Institute of Technology, Atlanta, United States
Hamed HONARI – Johns Hopkins University, Baltimore, United States
Olga IWASINSKA – Warsaw University of Technology, Poland
Emmanuelle JACQUET – University of Franche-Comté, Besançon, France
Maciej JAWORSKI – Warsaw University of Technology, Poland
Xiaoling JIN – Zhejiang University, Hangzhou, China
Halil Burak KAYBAL – Amasya University, Turkey
Vladis KOSSE – Queensland University of Technology, Brisbane, Australia
Krzysztof KUBRYŃSKI – Air Force Institute of Technology, Warsaw, Poland
Waldemar KUCZYŃSKI – Koszalin University of Technology, Poland
Igor KURYTNIK – State Higher School in Oswiecim, Poland
Daniel LESNIC – University of Leeds, United Kingdom
Witold LEWANDOWSKI – Gdańsk University of Technology, Poland
Guolu LI – Hebei University of Technology, Tianjin, China
Jun LI – Xi’an Jiaotong University, China
Baiquan LIN – China University of Mining and Technology, Xuzhou, China
Dawei LIU – Yanshan University, Qinhuangdao, China
Luis Norberto LÓPEZ DE LACALLE – University of the Basque Country, Bilbao, Spain
Ming LUO – Northwestern Polytechnical University, Xi’an, China
Xin MA – Shandong University, Jinan, China
Najmuldeen Yousif MAHMOOD – University of Technology, Baghdad, Iraq
Arun Kumar MAJUMDER – Indian Institute of Technology, Kharagpur, India
Paweł MALCZYK – Warsaw University of Technology, Poland
Miloš MATEJIĆ – University of Kragujevac, Serbia
Norkhairunnisa MAZLAN – Universiti Putra Malaysia, Serdang, Malaysia
Dariusz MAZURKIEWICZ – Lublin University of Technology, Poland
Florin MINGIREANU – Romanian Space Agency, Bucharest, Romania
Vladimir MITYUSHEV – Pedagogical University of Cracow, Poland
Adis MUMINOVIC – University of Sarajevo, Bosnia and Herzegovina
Baraka Olivier MUSHAGE – Université Libre des Pays des Grands Lacs, Goma, Congo (DRC)
Tomasz MUSZYŃSKI – Gdansk University of Technology, Poland
Mohamed NASR – National Research Centre, Giza, Egypt
Driss NEHARI – University of Ain Temouchent, Algeria
Oleksii NOSKO – Bialystok University of Technology, Poland
Grzegorz NOWAK – Silesian University of Technology, Gliwice, Poland
Iwona NOWAK – Silesian University of Technology, Gliwice, Poland
Samy ORABY – Pharos University in Alexandria, Egypt
Marcin PĘKAL – Warsaw University of Technology, Poland
Bo PENG – University of Huddersfield, United Kingdom
Janusz PIECHNA – Warsaw University of Technology, Poland
Maciej PIKULIŃSKI – Warsaw University of Technology, Poland
T.V.V.L.N. RAO – The LNM Institute of Information Technology, Jaipur, India
Andrzej RUSIN – Silesian University of Technology, Gliwice, Poland
Artur RUSOWICZ – Warsaw University of Technology, Poland
Benjamin SCHLEICH – Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany
Jerzy SĘK – Lodz University of Technology, Poland
Reza SERAJIAN – University of California, Merced, USA
Artem SHAKLEIN – Udmurt Federal Research Center, Izhevsk, Russia
G.L. SHI – Guangxi University of Science and Technology, Liuzhou, China
Muhammad Faheem SIDDIQUI – Vrije University, Brussels, Belgium
Jarosław SMOCZEK – AGH University of Science and Technology, Cracow, Poland
Josip STJEPANDIC – PROSTEP AG, Darmstadt, Germany
Pavel A. STRIZHAK – Tomsk Polytechnic University, Russia
Vadym STUPNYTSKYY – Lviv Polytechnic National University, Ukraine
Miklós SZAKÁLL – Johannes Gutenberg-Universität Mainz, Germany
Agnieszka TOMASZEWSKA – Gdansk University of Technology, Poland
Artur TYLISZCZAK – Czestochowa University of Technology, Poland
Aneta USTRZYCKA – Institute of Fundamental Technological Research, Warsaw, Poland
Alper UYSAL – Yildiz Technical University, Turkey
Gabriel WĘCEL – Silesian University of Technology, Gliwice, Poland
Marek WĘGLOWSKI – Welding Institute, Gliwice, Poland
Frank WILL – Technische Universität Dresden, Germany
Michał WODTKE – Gdańsk University of Technology, Poland
Marek WOJTYRA – Warsaw University of Technology, Poland
Włodzimierz WRÓBLEWSKI – Silesian University of Technology, Gliwice, Poland
Hongtao WU – Nanjing University of Aeronautics and Astronautics, China
Jinyang XU – Shanghai Jiao Tong University, China
Zhiwu XU – Harbin Institute of Technology, China
Zbigniew ZAPAŁOWICZ – West Pomeranian University of Technology, Szczecin, Poland
Zdzislaw ZATORSKI – Polish Naval Academy, Gdynia, Poland
Wanming ZHAI – Southwest Jiaotong University, Chengdu, China
Xin ZHANG – Wenzhou University of Technology, China
Su ZHAO – Ningbo Institute of Materials Technology and Engineering, China