Solidification/Stabilization Treatment for organic oil immobilization in Algerian Petroleum Drill Cuttings: Optimization and Acceptance Tests for Landfilling

Journal title

Archives of Environmental Protection








Abbas, Abbas Hadj : Laboratoire de géologie du Sahara, Université Kasdi Merbah Ouargla, Route de Ghardaia BP 511 Ouargla Algérie. ; Abbas, Abbas Hadj : Department of Chemical and Petroleum Engineering, University of Calgary, ; Aissa, Abidi Saad : Laboratoire de géologie du Sahara, Université Kasdi Merbah Ouargla, Route de Ghardaia BP 511 Ouargla Algérie ; Khodja, Mohamed : SONATRACH/Institut Algérien du Pétrole, Avenue 1 Novembre 35000 Boumerdès, Algeria ; Sagala, Farad : Department of Chemical and Petroleum Engineering, University of Calgary ; Sagala, Farad : Department of Energy, Minerals and Petroleum Engineering, Faculty of Applied Sciences and Technology, Mbarara, University of Science and Technology (MUST), Kihumuro Campus, Mbarara, Uganda ; Hacini, Messaoud : Laboratoire de géologie du Sahara, Université Kasdi Merbah Ouargla, Route de Ghardaia BP 511 Ouargla Algérie



compressive strength, ; Portland cement, ; solidification/stabilization, ; drill cuttings, ; drill cuttings, Total Petroleumdrill Hydrocarbon (TPH)

Divisions of PAS

Nauki Techniczne




Polish Academy of Sciences


  1. Abbas, A.H. (2011). Les bourbiers de forages pétroliers et des unités de production:Impact sur l’environnement et technique de traitement. Kasdi Merbeh Ouargla.
  2. Arafat, H.A., Hebatpuria, V.M., Rho, H.S., Pinto, N.G., Bishop, P.L. & Buchanan, R.C. (1999). Immobilization of phenol in cement-based solidified/stabilized hazardous wastes using regenerated activated carbon: Role of carbon. J. Hazard. Mater. 70, 139–156. DOI:10.1016/S0304-3894(99)00127-2
  3. Belferra, A., Kriker, A., Abboudi, S. & Bi, S.T. (2016). Effect of granulometric correction of dune sand and pneumatic waste metal fibers on shrinkage of concrete in arid climates. J. Clean. Prod. 112, 3048–3056. DOI : 10.1016/j.jclepro.2015.11.007
  4. Bodzek, M. (2022). Nanoparticles for water disinfection by photocatalysis: A review. Archives of Environmental Protection, 48, 1, pp. 3–17, DOI:10.24425/aep.2022.140541.
  5. Boutammine, H., Salem, Z. & Khodja, M. (2020). Petroleum drill cuttings treatment using stabilization/solidification and biological process combination. Soil Sediment Contam. 29, 369–383. DOI:10.1080/15320383.2020.1722982
  6. Clark, A.I. & Perry, R. (1985). Cement-Based Stabilization/Solidification Processes for the disposal of toxic wastes. Proceedings from a Workshop on Environmental Technology Assessment. Beaurmont, PWR, Jain, RK and Engelbrecht, RS, Eds. pp. 1 – 44.
  7. Coz, A., Andrés, A., Soriano, S., Viguri, J.R., Ruiz, M.C. & Irabien, J.A. (2009). Influence of commercial and residual sorbents and silicates as additives on the stabilisation/solidification of organic and inorganic industrial waste. J. Hazard. Mater. 164, 755–761. DOI:10.1016/j.jhazmat.2008.08.079
  8. Guide to disposal of chemically stabilized and solidified wastes, 1982. . U.S EPA SW872. DOI:10.1016/0016-2361(79)90171-6
  9. Kherfi, A. & Ganoune, L. (2018). Etude de l ’ efficacité des méthodes de traitement de boue de forage appliquée. Memoire de licence, Universite Kasdi Merbeh Ouargla.
  10. Khodja, M. (2008). Les Fluides De Forage : Etude Des Performances Et Considerations Environnementa 198.
  11. Krauthammer, T., Elfahal, M.M., Lim, J., Ohno, T., Beppu, M. & Markeset, G. (2003). Size effect for high-strength concrete cylinders subjected to axial impact. Int. J. Impact Eng. 28, 1001–1016. DOI:10.1016/S0734-743X(02)00166-5
  12. Lake, C.B. & Menzies, T. (2007). Assessment of two thermally treated drill mud wastes for landfill containment applications. Waste Management & Research: The Journal for a Sustainable Circular Economy 394–401. DOI:10.1177/0734242X07073652
  13. Larbi, A., Daaou, M. & Faraoun, A. (2015). Investigation of structural parameters and self-aggregation of Algerian asphaltenes in organic solvents. Pet. Sci. 12, 509–517. DOI:10.1007/s12182-015-0041-x
  14. Laroche, O., Wood, S.A., Tremblay, L.A., Ellis, J.I., Pawlowski, J., Lear, G., Atalah, J. & Pochon, X. (2016). First evaluation of foraminiferal metabarcoding for monitoring environmental impact from an offshore oil drilling site. Mar. Environ. Res. 120, 225–235. DOI:10.1016/j.mrenvres.2016.08.009
  15. Leonard, S.A., Roy, A.D. & Stegemann, J.A. (2010). Stabilization/solidification of petroleum drill cuttings: Thermal and microstructural studies of binder hydration products. Environ. Eng. Sci. 27, 889–903. DOI:10.1089/ees.2010.0147
  16. Leonard, S.A. & Stegemann, J.A. (2010). Stabilization/solidification of petroleum drill cuttings: Leaching studies. J. Hazard. Mater. 174, 484–491. DOI:10.1016/j.jhazmat.2009.09.078
  17. Liu, J., Nie, X., Zeng, X. & Su, Z. (2012). Cement-based solidification/stabilization of contaminated soils by nitrobenzene. Front. Environ. Sci. Eng. China 6, 437–443. DOI:10.1007/s11783-012-0406-y
  18. Malviya, R. & Chaudhary, R. (2006). Factors affecting hazardous waste solidification/stabilization: A review. J. Hazard. Mater. 137, 267–276. DOI:10.1016/j.jhazmat.2006.01.065
  19. Malviya, R. & Chaudhary, R. (2004). Study of the treatment effectiveness of a solidification/stabilization process for waste bearing heavy metals. J. Mater. Cycles Waste Manag. 6, 147–152. DOI:10.1007/s10163-004-0113-2
  20. Masrullita, Perry Burhan, R.Y. & Trihadiningrum, Y. (2018). Stabilization/solidification of waste containing heavy metals and hydrocarbons using OPC and land trass cement. J. Ecol. Eng. 19, 88–96. DOI:10.12911/22998993/92926
  21. Montgomery, D.M., Sollars, C.J., Perry, R., Tarling, S.E., Barnes, P. & Henderson, E. (1991). Treatment of Organic-Contaminated Industrial Wastes Using Cement-Based Stabilization/Solidification— Ii. Microstructural Analysis of the Organophilic Clay as a Pre-Solidification Adsorbent. Waste Manag. Res. 9, 113–125. DOI:10.1177/0734242X9100900116
  22. Ogechi Opete, S. E., Ibifuro, A.M. & Elijah, T.I. (2010). Stabilization/solidification of synthetic Nigerian drill cuttings. African J. Environ. Sci. Technol. 4, 149–153. DOI:10.5897/ajest09.012
  23. Paria, S. & Yuet, P.K. (2006). Solidification-stabilization of organic and inorganic contaminants using portland cement: A literature review. Environ. Rev. 14, 217–255. DOI:10.1139/A06-004
  24. Poon, C.S., Peters, C.J. & Perry, R. (1985). Mechanisms of Metal Stabilization by Cement Based Fixation Processes. Sci. Total Environ. Elsevier Holland pp. 55 – 71.
  25. Rho, H., Arafat, H.A., Kountz, B., Buchanan, R.C., Pinto, N.G. & Bishop, P.L. (2001). Decomposition of hazardous organic materials in the solidification/stabilization process using catalytic-activated carbon. Waste Manag. 21, 343–356. DOI:10.1016/S0956-053X(00)00080-5
  26. Rosener, M. (2008). Etude pétrophysique et modélisation des effets des transferts thermiques entre roche et fluide dans le contexte géothermique de Soultz-sous-Forêts . To cite this version : HAL Id : tel-00202959 Etude pétrophysique et modélisation des effets des transferts.
  27. Rusin, M., Gospodarek, J. & Nadgórska-Socha, A. (2021). Time-delayed effect of petroleum-derived products in soil and their bioremediation on plant – herbivore interaction. Archives of Environmental Protection, 47, 3,pp. 71-81, DOI:10.24425/aep.2021.138465.
  28. Tanikawa, W. & Shimamoto, T. (2006). Klinkenberg effect for gas permeability and its comparison to water permeability for porous sedimentary rocks. Hydrol. Earth Syst. Sci. Discuss. 3, 1315–1338. DOI:10.5194/hessd-3-1315-2006
  29. Vaccari, M. & Castro, F.D. (2019). Non-conventional stabilisation/solidification treatment of industrial wastes with residual powdered paints. Waste Manag. Res. 37, 1012–1024. DOI:10.1177/0734242X19860178
  30. Vehlow, J. (2012). Reduction of dioxin emissions from thermal waste treatment plants: A brief survey. Rev. Environ. Sci. Biotechnol. 11, 393–405. DOI:10.1007/s11157-012-9296-5
  31. Wang, Z., Sun, Y., Zhang, S. & Wang, Y. (2019). Effect of sodium silicate on Portland cement/calcium aluminate cement/gypsum rich-water system: Strength and microstructure. RSC Adv. 9, 9993–10003. DOI:10.1039/c8ra09901d
  32. Yoon, S., Bhatt, S.D., Lee, W., Lee, H.Y., Jeong, S.Y., Baeg, J.O. & Lee, C.W. (2009). Separation and characterization of bitumen from Athabasca oil sand. Korean J. Chem. Eng. 26, 64–71. DOI:10.1007/s11814-009-0011-3
  33. Young, J.F. (1992). Dense High Strength, Low Permeability Cement Based Materials for Containment. Proc. 1st Intl Symposium, Cement Industry Sol. to Waste Mgt, Canadian Portland Cement Assoc. Toronto pp. 13-22.
  34. Zhang, J. & Bishop, P.L. (2002). Stabilization/solidification (S/S) of mercury-containing wastes using reactivated carbon and Portland cement. J. Hazard. Mater. 92, 199–212. DOI:10.1016/S0304-3894(02)00019-5
  35. Zhao, T. Zhu, J. & Chi, P. (1999). Modification of Pore Chemicals in evaluation of High-Performance Concrete Permeability. ACI Mater. J. 96: 84 – 89.






DOI: 10.24425/aep.2022.140770



Abstracting & Indexing

Abstracting & Indexing

Archives of Environmental Protection is covered by the following services:

AGRICOLA (National Agricultural Library)




BIOSIS Citation Index





Engineering Village


Google Scholar

Index Copernicus

Journal Citation Reports™

Journal TOCs






Ulrich's Periodicals Directory


Web of Science