Possibilities of using ash from thermal treatment of municipal solid waste in hardening slurries

Journal title

Archives of Environmental Protection




vol. 49


No 2


Szarek, Łukasz : Faculty of Building Services, Hydro and Environmental Engineering,Warsaw University of Technology, Poland ; Falaciński, Paweł : Faculty of Building Services, Hydro and Environmental Engineering,Warsaw University of Technology, Poland ; Drużyński, Piotr : Faculty of Building Services, Hydro and Environmental Engineering,Warsaw University of Technology, Poland



municipal solid waste ; fly ash ; hardening slurry ; cement-bentonite slurry ; cementitious materials ; circular economy

Divisions of PAS

Nauki Techniczne




Polish Academy of Sciences


  1. Almahdawi, F.H.M.; Al-Yaseri, A.Z. & Jasim, N. (2014). Apparent viscosity direct from Marsh funnel test. Iraqi Journal of Chemical and Petroleum Engineering, 15(1), pp. 51-57, ISSN: 1997-4884
  2. Alwaeli, M.; Alshawaf, M. & Klasik, M. (2022). Recycling of selected fraction of municipal solid waste as artificial soil substrate in support of the circular economy. Archives of Environmental Protection, 48(4), pp. 68–77. DOI:10.24425/aep.2022.143710
  3. Borys, M. (2012). Hardening slurry cut-off walls in dyke bodies and bases. Wiadomości melioracyjne i łąkarskie, 55(2), pp. 89-95. (in Polish).
  4. Borys, M.; Rycharska, J. (2006). Parameters of hardening slurries used for the construction of cut-off walls in dykes. Woda-Środowisko-Obszary Wiejskie, 6(1), pp.47-56. (in Polish)
  5. Chomkhamsri, K. & Pelletier, N. (2011). Analysis of existing environmental footprint methodologies for products and organizations: recommendations, rationale, and alignment. Institute for Environment and Sustainability, pp. 1-61.
  6. Domańska, W.; Bochenek, D.; Dawgiałło, U.; Gorzkowska, E.; Hejne, J.; Kiełczykowska, A.; Kruszewska, D.; Nieszałą, A.; Nowakowska, B.; Sulik, J.; Wichniewicz, A.; Wrzosek, A. (2022). Environment 2022. Statistics Poland. Warsaw, 157–158p.
  7. Falacinski, P. & Szarek, Ł. (2016). Possible applications of hardening slurries with fly ash from thermal treatment of municipal sewage sludge in environmental protection structures. Archives of Hydro-Engineering and Environmental Mechanics, 63, pp. 47-61.DOI: 10.1515/heem-2016-0004
  8. Falaciński, P. (2012). Possible applications of hardening slurries with fluidal ashes in environment protection structures. Archives of Environmental Protection 38, pp. 91-104. DOI:10.2478/v10265-012-0031-7
  9. Falaciński, P.; Kledyński, Z. (2006). Influence of aggressive liquids on hydraulic conductivity of hardening slurries with the addition of different fluidal fly ashes. Environmental Engineering: Proceedings of the 2nd National Congress on Environmental Engineering, 4-8 September 2005. CRC Press, pp. 295-300.
  10. Ferreira, C.; Ribeiro, A.; Ottosen, L. (2003). Possible applications for municipal solid waste fly ash. Journal of Hazardous Materials, 96(2-3), pp. 201-216.
  11. Garvin, S.L.; Hayles, C.S. (1999). The chemical compatibility of cement–bentonite cut-off wall material. Construction and Building Materials, 13(6), pp. 329-341.
  12. Jefferis, S. (2012). Cement-bentonite slurry systems. In Grouting and Deep Mixing 2012, pp.1-24.
  13. Jefferis, S. (2013). Grouts and slurries. In Construction Materials Reference Book. Routledge, pp. 173-202.
  14. Jefferis, S.A. (2008). Reactive transport in cut-off walls and implications for wall durability. In GeoCongress 2008: Geotechnics of Waste Management and Remediation, pp. 652-659.
  15. Kledynski, Z.; Machowska, A. (2013). Hardening slurries with ground granulated blast furnace slag activated with fluidal fly ash from lignite combustion. Przemysł Chemiczny 92(4), pp.490-497. (in Polish)
  16. Kledyński, Z. (1989). The use of statistical planning of experiments in the search for a frost resistant hardening slurry. Gospodarka Wodna, 9, pp. 181-184. (in Polish)
  17. Kledyński, Z. (2000). Corrosion resistance of hardening slurries in environmental facilities. Prace Naukowe Politechniki Warszawskiej. Inżynieria Środowiska, 33, pp. 3-101. (in Polish)
  18. Kledyński, Z.; Rafalski, L. (2009). Hardening slurries. Komitet Inżynierii Lądowej i Wodnej Polskiej Akademii Nauk Instytut Podstawowych Problemów Technicznych. Studia z Zakresu Inżynierii, 66. Warszawa. pp.1-234. (in Polish)
  19. Kledyński, Z.; Falaciński, P.; Machowska, A.; Dyczek, J. (2016). Utilisation of CFBC fly ash in hardening slurries for flood-protecting dikes. Archives of Civil Engineering, 62, pp. 75-88.
  20. Kledyński, Z.; Falaciński, P.; Machowska, A.; Szarek, Ł.; Krysiak, Ł. (2021). Hardening Slurries with Fluidized-Bed Combustion By-Products and Their Potential Significance in Terms of Circular Economy. Materials, 14(9). DOI: 10.3390/ma14092104
  21. Kumar, A.; Mittal, A. (2019). Utilization of municipal solid waste ash for stabilization of cohesive soil. In Environmental Geotechnology: Proceedings of EGRWSE 2018, Springer. Singapore, pp .133-139.
  22. Lam, C.H.K.; Barford, J.P.; McKay, G. (2011). Utilization of municipal solid waste incineration ash in Portland cement clinker. Clean technologies and environmental policy, 13, pp. 607-615.
  23. Liang, S.; Chen, J.; Guo, M.; Feng, D.; Liu, L.; Qi, T. (2020). Utilization of pretreated municipal solid waste incineration fly ash for cement-stabilized soil. Waste Management, 105:, pp. 425-432. DOI: 10.1016/j.wasman.2020.02.017
  24. Marsh, H.N. (1931). Properties and treatment of rotary mud. Transactions of the AIME, 92, pp. 234-251.
  25. Mewis, J. (1979). Thixotropy-a general review. Journal of Non-Newtonian Fluid Mechanics, 6, pp. 1-20.
  26. Opdyke, S.M.; Evans, J.C. (2005). Slag-Cement-Bentonite Slurry Walls. Journal of Geotechnical and Geoenvironmental Engineering, 131, pp. 673-681.
  27. Orr, J.; Gibbons, O.; Arnold, W. (2020). A brief guide to calculating embodied carbon.
  28. Pawnuk, M.; Szulczyński, B.; den Boer, E.; Sówka, I. (2022). Preliminary analysis of the state of municipal waste management technology in Poland along with the identification of waste treatment processes in terms of odor emissions. Archives of Environmental Protection, 48(3), pp. 3-20. DOI: 10.24425/aep.2022.142685
  29. Peters, G.P. (2010). Carbon footprints and embodied carbon at multiple scales. Current Opinion in Environmental Sustainability, 2, pp. 245-250.
  30. Primus, A.; Chmielniak, T.; Rosik-Dulewska, C. (2021). Concepts of energy use of municipal solid waste. Archives of Environmental Protection, 47(2), pp. 70-80. DOI: 10.24425/aep.2021.137279
  31. Rafalski, L. (1995). Właściwości i zastosowanie zawiesin twardniejących. Instytut Badawczy Dróg i Mostów.
  32. Ruffing, D.; Evans, J. (2019). Soil Mixing and Slurry Trench Cutoff Walls for Coal Combustion Residue Sites. 2019 World of Coal Ash.
  33. Siddique, R. (2010)a. Use of municipal solid waste ash in concrete. Resources. Conservation and Recycling, 55, pp. 83-91.
  34. Siddique, R. (2010)b. Utilization of municipal solid waste (MSW) ash in cement and mortar. Resources, Conservation and Recycling, 54, pp. 1037-1047.
  35. Stanisz, A. (2007). Przystępny kurs statystyki: z zastosowaniem STATISTICA PL na przykładach z medycyny. Analizy wielowymiarowe. StatSoft.
  36. Szarek, Ł. (2019). The influence of addition fly ash from thermal treatment of municipal sewage sludge on selected hardening slurries properties. In Monitoring and Safety of Hydrotechnical Constructions, pp.329-340. (in Polish)
  37. Szarek, Ł. (2020). Leaching of heavy metals from thermal treatment municipal sewage sludge fly ashes. Archives of Environmental Protection, 46(3), pp. 49-59. DOI: 10.24425/aep.2020.134535
  38. Talefirouz, D.; Çokça, E.; Omer, J. (2016). Use of granulated blast furnace slag and lime in cement-bentonite slurry wall construction. International journal of geotechnical engineering, 10, pp. 81-85.
  39. Uliasz-Bocheńczyk, A.; Deja, J.; Mokrzycki, E. (2021). The use of alternative fuels in the cement industry as part of circular economy. Archives of Environmental Protection, 47(4), pp. 109-117. DOI: 10.24425/aep.2021.139507
  40. Wiedmann, T.; Minx, J. (2008). A definition of ‘carbon footprint.’ Ecological economics research trends, 1, pp. 1-11.
  41. Wielgosiński, G. (2016). Spalarnie odpadów komunalnych w perspektywie 2020 r. Przegląd Komunalny, pp. 30-32.
  42. Wojtkowska, M.; Falaciński, P.; Kosiorek, A. (2016). The release of heavy metals from hardening slurries with addition of selected combustion by-products. Inżynieria i Ochrona Środowiska, 19, pp. 479-491. (in Polish)
  43. EN 450-1:2012 Fly ash for concrete. Definition, specifications and conformity criteria.
  44. ISO/TS 14067:2013 Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification and communication. .
  45. Regulation of the Minister of Climate of 2 January 2020 on the waste catalogue (Journal of Laws from 2020, item. 10 - Dz.U. 2020 poz. 10). (in Polish)
  46. Waste Act of 14 December 2012 r. (Journal of Laws from 2013, item. 21 - Dz.U. 2013 poz. 21). (in Polish)
  47. PN-EN 196-2:2013-11 Methods of testing cement -- Part 2: Chemical analysis of cement. (in Polish)
  48. PN EN 451-2:2017-06 Method of testing fly ash - Part 2: Determination of fineness by wet sieving. (in Polish)
  49. BN-90/1785-01:1990. Drilling mud. Field test methods. (in Polish)
  50. PN-85/G-02320:1985. Drilling. Cements and grouts for cementing in boreholes. (in Polish)






DOI: 10.24425/aep.2023.145899

Abstracting & Indexing

Abstracting & Indexing

Archives of Environmental Protection is covered by the following services:

AGRICOLA (National Agricultural Library)




BIOSIS Citation Index





Engineering Village


Google Scholar

Index Copernicus

Journal Citation Reports™

Journal TOCs






Ulrich's Periodicals Directory


Web of Science