Details
Title
Numerical modelling of a microreactor for thermocatalytic decomposition of toxic compoundsJournal title
Chemical and Process EngineeringYearbook
2011Issue
No 3 SeptemberAuthors
Keywords
microreactor ; modelling ; slip boundary conditions ; CFDDivisions of PAS
Nauki TechniczneCoverage
215-227Publisher
Polish Academy of Sciences Committee of Chemical and Process EngineeringDate
2011Type
Artykuły / ArticlesIdentifier
DOI: 10.2478/v10176-011-0017-3 ; ISSN 2300-1925 (Chemical and Process Engineering)Source
Chemical and Process Engineering; 2011; No 3 September; 215-227References
Aoki N. (2004), Mixing in microreactors: effectiveness of lamination segments as a form of feed on product distribution for multiple reactions, Chem. Eng. J, 101, 323, doi.org/10.1016/j.cej.2003.10.015 ; Aoki N. (2007), Fluid segment configuration for improving product yield and selectivity of catalytic surface reactions in microreactors, Chem. Eng. J, 133, 105, doi.org/10.1016/j.cej.2007.02.006. ; Badur J. (2003), Numerical modelling of sustainable combustion In gas turbines. ; G.-B Chen (2007), Effects of catalytic walls on hydrogen/air combustion inside a micro-tube, Appl. Catal. A, 332, 89, doi.org/10.1016/j.apcata.2007.08.011 ; Deutschmann O. (2000), Hydrogen assisted catalytic combustion of methane on platinum, Catal. Today, 59, 141, doi.org/10.1016/S0920-5861(00)00279-0. ; Duan Z. (2007), Slip flow in non-circular microchannels, Microfluid Nanofluid, 3, 473, doi.org/10.1007/s10404-006-0141-4. ; Duran J. (2010), Modeling of annular reactors with surface reaction using computational fluid dynamics (CFD), Chem. Eng. Sci, 65, 1201, doi.org/10.1016/j.ces.2009.09.075 ; Ewart T. (2007), Tangential momentum accommodation in microtube, Microfluid Nanofluid, 3, 689, doi.org/10.1007/s10404-007-0158-3 ; Jebauer S. (2007), Implementation of velocity slip and temperature jump boundary conditions for microfluidic devices, ITFR Reports, 5, 1. ; Jóźwik P. (2010), Final report of research project OR00004905 on: Military application of micro, ultra and nanocrystalline alloys Ni<sub>3</sub>Al - Technology demonstrator of thermoactive elements for contaminated air treatment systems. ; Jóźwik P. (2010), Catalytic activity of Ni<sub>3</sub>Al foils in decomposition of selected chemical compounds, Inżynieria Materiałowa, 3, 654. ; Karniadakis G. (2005), Interdisciplinary Applied Mathematics, 29. ; Maxwell J. (1879), On stresses in rarified gases arising from inequalities of temperature, Phil. Trans. R. Soc. London, 170, 231, doi.org/10.1098/rstl.1879.0067 ; Morini G. (2005), A criterion for experimental validation of slip-models for incompressible rarefied gases through microchannels, Microfluid Nanofluid, 1, 190, doi.org/10.1007/s10404- 004-0028-1. ; Mu D. (2008), Determination of the effective diffusion coefficient in porous media including Knudsen effects, Microfluid Nanofluid, 4, 257, doi.org/10.1007/s10404-007-0182-3 ; Norton D. (2003), Combustion characteristics and flame stability at the microscale: a CFD study of premixed methane/air mixtures, Chem. Eng. Sci, 58, 4871, doi.org/10.1016/j.ces.2002.12.005. ; Olafsen A. (2006), Light alkanes CO<sub>2</sub> reforming to synthesis gas over Ni based catalysts, Catal. Today, 115, 179, doi.org/10.1016/j.cattod.2006.02.053. ; Pitakarnnop J. (2010), A novel experimental setup for gas microflows, Microfluid Nanofluid, 8, 57, doi.org/10.1007/s10404-009-0447-0 ; Reid R. (1966), The properties of gases and liquids. ; Xu B. (2005), Concentration slip and its impact on heterogeneous combustion in a micro scale chemical reactor, Chem. Eng. Sci, 60, 3561, doi.org/10.1016/j.ces.2005.01.022. ; Yakabe H. (2000), Evaluation and modeling of performance of anode-supported solid oxide fuel cell, J. Power Sources, 86, 423, doi.org/10.1016/S0378-7753(99)00444-9Editorial Board
Editorial Board
Ali Mesbah, UC Berkeley, USA 
0000-0002-1700-0600
Anna Gancarczyk, Institute of Chemical Engineering, Polish Academy of Sciences, Poland 0000-0002-2847-8992
Anna Trusek, Wrocław University of Science and Technology, Poland 0000-0002-3886-7166
Bettina Muster-Slawitsch, AAE Intec, Austria 0000-0002-5944-0831
Daria Camilla Boffito, Polytechnique Montreal, Canada 0000-0002-5252-5752
Donata Konopacka-Łyskawa, Gdańsk University of Technology, Poland 0000-0002-2924-7360
Dorota Antos, Rzeszów University of Technology, Poland 0000-0001-8246-5052
Evgeny Rebrov, University of Warwick, UK 0000-0001-6056-9520
Georgios Stefanidis, National Technical University of Athens, Greece 0000-0002-4347-1350
Ireneusz Grubecki, Bydgoszcz Univeristy of Science and Technology, Poland 0000-0001-5378-3115
Johan Tinge, Fibrant B.V., The Netherlands 0000-0003-1776-9580
Katarzyna Bizon, Cracow University of Technology, Poland 0000-0001-7600-4452
Katarzyna Szymańska, Silesian University of Technology, Poland 0000-0002-1653-9540
Marcin Bizukojć, Łódź University of Technology, Poland 0000-0003-1641-9917
Marek Ochowiak, Poznań University of Technology, Poland 0000-0003-1543-9967
Mirko Skiborowski, Hamburg University of Technology, Germany 0000-0001-9694-963X
Nikola Nikacevic, University of Belgrade, Serbia 0000-0003-1135-5336
Rafał Rakoczy, West Pomeranian University of Technology, Poland 0000-0002-5770-926X
Richard Lakerveld, Hong Kong University of Science and Technology, Hong Kong 0000-0001-7444-2678
Tom van Gerven, KU Leuven, Belgium 0000-0003-2051-5696
Tomasz Sosnowski, Warsaw University of Technology, Poland 0000-0002-6775-3766