Management and Production Engineering Review

Content

Management and Production Engineering Review | 2023 | vol. 14 | No 4

Download PDF Download RIS Download Bibtex

Abstract

This paper describes the p-diagram (parameter-diagram) and its application in planning a DoE (Design of Experiments). A case study describing an actual problem from industry is presented where the planning phase started to go wrong as difficulties in selecting the right variables for the DoE were discovered. Furthermore, running these experiments became prohibitively expensive, due to the large number of such experiments that would be needed, and though the exploitation of a p-diagram it was then possible to come up with a feasible DoE.
Go to article

Authors and Affiliations

Matthew Barsalou
ORCID: ORCID
Karolina WILCYNSKA
Pedro Manuel SARAIVA
Download PDF Download RIS Download Bibtex

Abstract

In sequencing situations, it may affect parameters used to determine an optimal order in the queue, and consequently the decision of whether (or not) to rearrange the queue by sharing the realized cost savings. In this paper, we extend one machine sequencing situations and their related cooperative games under fuzzy uncertainty. Here, the agents costs per unit of time and processing time in the system are fuzzy intervals. In the sequel, we define sequencing fuzzy interval games and show that these games are convex. Further, fuzzy equal gain splitting rule is given. Finally, a numerical example is illustrated priority based scheduling algorithm.
Go to article

Authors and Affiliations

Ismail ÖZCAN
Sırma Zeynep ALPARSLAN GÖK
Gerhard-Wilhelm WEBER
Download PDF Download RIS Download Bibtex

Abstract

Environmental awareness among the masses compelled many companies to adopt sustainable practices in their business operations. Remanufacturing is a well-tested and successful business model practiced in many European countries. But in many African and Asian countries, it is still nascent, including India. This research study tries to identify the critical factors in the “Operational Management” area for the viability of remanufacturing business in India. For this purpose, a questionnaire was developed based on the important factors identified from the extensive literature review. An online questionnaire survey was conducted among Indian white goods appliance manufacturing companies and their suppliers. The responses were analyzed statistically and ranked based on their criticality in initiating remanufacturing business in India. The findings may help the Indian government and manufacturing firms to frame proper strategies related to the operational management issues of remanufacturing business in India.
Go to article

Authors and Affiliations

Ajay Kumar Sinha
Hanumantha Rao P.
Download PDF Download RIS Download Bibtex

Abstract

This paper uses a Genetic Algorithm (GA) to reduce total tardiness in an identical parallel machine scheduling problem. The proposed GA is a crossover-free (vegetative reproduction) GA but used for four types of mutations (Two Genes Exchange mutation, Number of Jobs mutation, Flip Ends mutation, and Flip Middle mutation) to make the required balance between the exploration and exploitation functions of the crossover and mutation operators. The results showed that use of these strategies positively affects the accuracy and robustness of the proposed GA in minimizing the total tardiness. The results of the proposed GA are compared to the mathematical model in terms of the time required to tackle the proposed problem. The findings illustrate the ability of the propounded GA to acquire the results in a short time compared to the mathematical model. On the other hand, increasing the number of machines degraded the performance of the proposed GA.
Go to article

Authors and Affiliations

Saleem Zeyad RAMADAN
Najat ALMASARWAH
Esraa S. ABDELALL
Gursel A. SUER
Nibal T. ALBASHABSHEH
Download PDF Download RIS Download Bibtex

Abstract

The article presents a business model based on an industrial network of companies capable of producing personalized products in an Industry 4.0 environment. Based on research conducted in Poland, in manufacturing companies, the critical problems associated with the implementation of Industry 4.0 technologies and the expected benefits associated with their implementation are addressed. The model’s task is to integrate a customer expecting personalized production with a network of companies with the appropriate production resources. The original achievement is the integration of the customer and the manufacturer around an e-business platform, which allows the rapid prototyping of a network of SME companies capable of realizing personalized production. The proposed model describes the architecture of enterprise cooperation under the conditions of implementing the Industry 4.0 concept and is dedicated to the SME sector. The model provides a basis for building prototypes of e-business platforms of small and medium-sized enterprises.
Go to article

Authors and Affiliations

Sandra GRABOWSKA
Sebastian SANIUK
Download PDF Download RIS Download Bibtex

Abstract

The paper presents a method for improving the lime production process by increasing the efficiency of the lime slurry transport that occurs in it. The aim of the study was to reduce the energy demand of the pump installed in the discharge line. The presented solution consists of applying an additive called deflocculant to the transported slurry in order to reduce its viscosity while increasing the concentration of solids content. The deflocculant applied to the slurry is composed of waste material from the lime slaking process and an environmentally neutral chemical substance in the form of sodium-water glass. The rheological studies conducted confirm the positive effect of the selected deflocculant on the properties of the slurry tested. As a result of the analysis, it has been shown that the proposed solution has a substantial effect on reducing the friction factor of the transported slurry, thus reducing the energy consumption in the investigated process.
Go to article

Authors and Affiliations

Beata Joanna JAWORSKA-JÓZWIAK
Download PDF Download RIS Download Bibtex

Abstract

Production problems have a significant impact on the on-time delivery of orders, resulting in deviations from planned scenarios. Therefore, it is crucial to predict interruptions during scheduling and to find optimal production sequencing solutions. This paper introduces a selflearning framework that integrates association rules and optimisation techniques to develop a scheduling algorithm capable of learning from past production experiences and anticipating future problems. Association rules identify factors that hinder the production process, while optimisation techniques use mathematical models to optimise the sequence of tasks and minimise execution time. In addition, association rules establish correlations between production parameters and success rates, allowing corrective factors for production quantity to be calculated based on confidence values and success rates. The proposed solution demonstrates robustness and flexibility, providing efficient solutions for Flow-Shop and Job-Shop scheduling problems with reduced calculation times. The article includes two Flow-Shop and Job-Shop examples where the framework is applied.
Go to article

Authors and Affiliations

Mateo DEL GALLO
Filippo Emanuele CIARAPICA
Giovanni MAZZUTO
Maurizio BEVILACQUA
Download PDF Download RIS Download Bibtex

Abstract

This study was conducted in a company that produces palm oil-based products such as cooking oil and margarine. The study aimed to encounter defects in packaging pouches. This study integrated the overall equipment effectiveness (OEE) with the six sigma DMAIC method. The OEE was performed to measure the efficiency of the machine. Three factors were measured in OEE: availability, performance, and quality. These factors were calculated and compared to the OEE world-class value. Then, the Multiple Linear Regression was performed using SPSS to determine the correlation between measurement variables toward the OEE value. Lastly, the six sigma method was implemented through the DMAIC approach to find the solution and improve the packaging quality. Supposing the recommendations are implemented, the OEE is expected to increase from 82% to 85%, with availability ratio, performance ratio, and quality ratio at, 99%, 86%, and 99.8%, respectively.
Go to article

Authors and Affiliations

Filscha Nurprihatin
Glisina Dwinoor Rembulan
Johanes Fernandes Andry
Maulidina Lubis
Ivana Tita Bella WIDIWATI
Ali VAEZI
Download PDF Download RIS Download Bibtex

Abstract

This research addresses an inventory classification problem in a company that manufactures plastic pallets. Classification of the inventory is difficult because it is subject to two restrictions: the number of changeovers and the size of inventory storage. A mathematical model is first proposed to maximize the fill rate by classifying all product items into four groups. Due to all items can be classified based on the monthly demand, in descending order. The present study then proposed a procedure to find the classification that is most efficient. According to the experimental results, the maximum fill rate in the current situation is 89.85%. The proposed methodology also tested different production batches and levels of demand. The proposed methodology was found to be appropriate for practical application.
Go to article

Authors and Affiliations

Yiyo KUO
Hao-Chen JIANG
Download PDF Download RIS Download Bibtex

Abstract

Management and Production Engineering Review (MPER) is a peer-refereed, international, multidisciplinary journal covering a broad spectrum of topics in production engineering and management. Production engineering is a currently developing stream of science encompassing planning, design, implementation and management of production and logistic systems. Orientation towards human resources factor differentiates production engineering from other technical disciplines. The journal aims to advance the theoretical and applied knowledge of this rapidly evolving field, with a special focus on production management, organisation of production processes, management of production knowledge, computer integrated management of production flow, enterprise effectiveness, maintainability and sustainable manufacturing, productivity and organisation, forecasting, modelling and simulation, decision making systems, project management, innovation management and technology transfer, quality engineering and safety at work, supply chain optimization and logistics. Management and Production Engineering Review is published under the auspices of the Polish Academy of Sciences Committee on Production Engineering and Polish Association for Production Management. The main purpose of Management and Production Engineering Review is to publish the results of cutting-edge research advancing the concepts, theories and implementation of novel solutions in modern manufacturing. Papers presenting original research results related to production engineering and management education are also welcomed. We welcome original papers written in English. The Journal also publishes technical briefs, discussions of previously published papers, book reviews, and editorials. Letters to the Editor-in-Chief are highly encouraged.
Go to article

Authors and Affiliations

Saltanat BEISEMBINA
Mamyrbek BEISENBI
Nurgul KISSIKOVA
Aliya Shukirova
Download PDF Download RIS Download Bibtex

Abstract

The engine is the most important component of a vehicle. It attaches to the main frame via the engine mounting bracket which supports weight and operating loads. The engine mount therefore plays a crucial role in the durability and comfort of the vehicle. This article contributes to the search for the most optimal model from the point of view of resistance, environmental impact, and manufacturing cost. This involves, on the one hand, optimizing the support by reducing its initial mass by 30%, and on the other hand, seeking suitable material and manufacturing process with the least environmental impact. To this end, topology optimization will be combined with an environmental assessment and a manufacturing cost analysis. Four materials will be tested and evaluated. Finally, a cost analysis will present a comparison between a conventional process and 3D printing.
Go to article

Authors and Affiliations

Hicham Fihri FASSI
Hadji ANIYOU
Download PDF Download RIS Download Bibtex

Abstract

The main goal of the research is to develop a set of guidelines for the development of business within the framework of the green industry, in compliance with all current environmental regulations, as applied to the realities of the current economic situation in China. The methodology basis is a combination of system analysis of the key principles of business development within the framework of environmental strategy in China with a comprehensive analysis of green industry concept as a factor limiting the activities of enterprises to avoid environmental pollution. The results obtained in the research indicate the presence of significant results in the interaction of government and business in the framework of mutually beneficial collaboration for the growth of the green industry. Chinese business structures invest in the development of “green” industrial and manufacturing technologies while ensuring the necessary level of environmental protection.
Go to article

Authors and Affiliations

Rustem KORABAYEV
Kazbek KORABAYEV

Instructions for authors

REVIEW PROCESS

Received manuscripts are first examined by the Management and Production Engineering Review Editors.
Manuscripts clearly not suitable for publication, incomplete or not prepared in the required style will be sent back to the authors without scientific review, but may be resubmitted as soon as they have been corrected.
The corresponding author will be notified by e-mail when the manuscript is registered at the Editorial Office (https://www.editorialsystem.com/mper/). The responsible editor will make the decision either to send the manuscript to another reviewer to resolve the difference of opinion or return it to the authors for revision. The ultimate decision to accept, accept subject to correction, or reject a manuscript lies within the prerogative of the Editor-in-Chief and is not subject to appeal. The editors are not obligated to justify their decision.
All manuscripts submitted to MPER editorial system ( https://www.editorialsystem.com/mper/) will be sent to at least two and in some cases three reviewers for passing the double-blind review process.
The material formatted in the MPER format must be unpublished and not under submission elsewhere.

REVIEWERS
Once a year a list of co-operating reviewers is publish in electronic version of MPER. All articles published in MPER are published in open access.


APC
In order to provide free access to readers, and to cover the costs of copyediting, typesetting, long-term archiving, and journal management, an article processing charge (APC) of 800 PLN (about 180 Euro, VAT included) for 10-page article applies to papers accepted after peer review. Each additional page of the article (over 10 pages) costs 80 PLN (about 18 Euro, VAT included).
Maximum length of the article is 18 pages (using MPER template).
There is no submission charge.

Guidelines for Authors

Template for Authors





Additional info

The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on https://creativecommons.org/licenses/by/4.0/.

Publication Ethics Policy

The ethics statements for the journal Management and Production Engineering Review are based on the guidelines of Committee on publication ethics (COPE) and the ELSEVIER publishing ethics resource kit.
For Authors: All articles, published in the journal Management and Production Engineering Review have to comprise a list of references which correspond with the journal’s Instructions to authors for paper preparation. The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted. All articles are tested using antyplagiarism programme. An author should not in general publish manuscripts describing essentially the same research in more than one journal or primary publication. Submitting the same manuscript to more than one journal concurrently constitutes unethical publishing behaviour and is unacceptable. Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study. The corresponding author should ensure that all co-authors have seen and approved the final version of the paper and have agreed to its submission for publication. All authors should disclose in their manuscript any financial or other substantive conflict of interest that might be construed to influence the results or interpretation of their manuscript. All sources of financial support for the project should be disclosed.
For Editor-in-Chief: The editor is responsible for decision which of the articles submitted to the journal should be published. The editor and editorial board and office must not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, potential reviewers, other editorial advisers, and the publisher, as appropriate. Unpublished materials disclosed in a submitted manuscript must not be used in an editor's own research without the express written consent of the author.
For Reviewers: Peer review helps the editor in making editorial decisions and also assist the author in improving the paper. Any selected referee who feels unqualified to review the research reported in a manuscript or knows that its prompt review will be impossible should notify the editor and excuse himself from the review process. Any manuscripts received for review must be treated as confidential documents. They must not be shown to or discussed with others except as authorized by the editor. Reviews should be conducted objectively. Personal criticism of the author is inappropriate. Reviewers should identify relevant published work that has not been cited by the authors. Any statement that an observation, derivation, or argument had been previously reported should be accompanied by the relevant citation. A reviewer should also call to the editor's attention any substantial similarity or overlap between the manuscript under consideration and any other published paper of which they have personal knowledge. Information obtained through peer review must be kept confidential and not used for personal advantage. Reviewers should not consider manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the papers. Other sources: http://apem-journal.org/

Peer-review Procedure

Received manuscripts are first examined by the Management and Production Engineering Review Editors. Manuscripts clearly not suitable for publication, incomplete or not prepared in the required style will be sent back to the authors without scientific review, but may be resubmitted as soon as they have been corrected. The corresponding author will be notified by e-mail when the manuscript is registered at the Editorial Office (marta.grabowska@put.poznan.pl; mper@put.poznan.pl). The ultimate decision to accept, accept subject to correction, or reject a manuscript lies within the prerogative of the Editor-in-Chief and is not subject to appeal. The editors are not obligated to justify their decision. All manuscripts submitted to MPER editorial office (https://www.editorialsystem.com/mper/) will be sent to at least two and in some cases three reviewers for passing the double-blind review process. The responsible editor will make the decision either to send the manuscript to another reviewer to resolve the difference of opinion or return it to the authors for revision.

The average time during which the preliminary assessment of manuscripts is conducted - 14 days
The average time during which the reviews of manuscripts are conducted - 6 months
The average time in which the article is published - 8.4 months

Reviewers

Degree Name Surname Affiliation Dr. Hind Ali University of Technology, Iraq Prof. Katarzyna Antosz Rzeszow University of Technology, Poland Dr. Bagus Arthaya Mechatronics Engineering Universitas Parahyangan, Indonesia Dr. Sarini Azizan Australian National University, Australia Prof. Zbiegniew Banaszak Koszalin University of Technology, Poland Prof. Lucia Bednarova Technical University of Kosice, Slovak Republic Prof. Kamila Borsekova UNIVERZITA MATEJA BELA V BANSKEJ BYSTRICI, Slovak Republic Prof. Rachid Boutarfa Hassan First University, Morocco Prof. Anna Burduk Wrocław University of Science and Technology, Poland Dr. Virginia Casey Universidad Nacional de Rosario, Argentina Claudiu Cicea Bucharest University of Economic Studies Romania, Romania Prof. Ömer Cora Karadeniz Technical University, Turkey Prof. Wiesław Danielak Uniwersytet Zielonogórski, Poland Dr. Jacek Diakun Poznan University of Technology, Poland Dr. Ewa Dostatni Poznan University of Technology, Poland Prof. Marek Dźwiarek Central Institute for Labor Protection Dr. Milan Edl University of West Bohemia, Czech Republic Joanna Ejdys Bialystok University of Technology, Poland Prof. Abdellah El barkany Sidi Mohamed Ben Abdellah University, Morocco Francesco Facchini Università degli Studi di Bari, Italy Prof. Mária Magdolna Farkasné Fekete Szent István University, Hungary Prof. Çetin Fatih Başkent Üniversitesi, Turkey Mose Gallo University of Napoli Federico, Italy Dr. Mit Gandhi Gujarat Gas Limited, India Prof. Józef Gawlik Cracow University of Technology, Poland Dr. Andrzej Gessner Poznan University of Technology, Poland Dr. Pedro Glass Universitatea Valahia din Targoviste, Romania Dr. Arkadiusz Gola Lublin University of Technology, Poland Alireza Goli Yazd university, Iran Dr. Magdalena Graczyk-Kucharska Poznan University of Technology, Poland Dr. Damian Grajewski Poznan University of Technology, Poland Dr. Łukasz Grudzień Poznan University of Technology, Poland Patrik Grznár University of Žilina, Slovak Republic Dr. Anouar Hallioui Sidi Mohamed Ben Abdellah University, Morocco Prof. Ali Hamidoglu Turkey Prof. Adam Hamrol Poznan University of Technology, Poland Dr. ni luh putu hariastuti itats, Indonesia Dr. Christian Harito Bina Nusantara University, Indonesia Dr. Muatazz Hazza School of Engineering, United Arab Emirates Dr. Ali Jaboob Dhofar University, Oman Prof. Małgorzata Jasiulewicz-Kaczmarek Poznan University of Technology, Poland Prof. Oláh Judit University of Debrecen, Hungary Prof. Jan Klimek Szkoła Główna Handlowa, Poland Dr. Nataliia Klymenko National University of Life and Environmental Sciences of Ukraine Prof. Sławomir Kłos University of Zielona Góra, Poland Dr. Peter Kostal Slovenská Technická Univerzita V Bratislave, Slovak Republic Prof. Martin Krajčovič University of Žilina, Slovak Republic Prof. Robert Kucęba Politechnika Częstochowska, Poland Dr. Agnieszka Kujawińska Poznan University of Technology, Poland Dr. Edyta Kulej-Dudek Politechnika Częstochowska, Poland Prof. Christian Landschützer Graz University of Technology, Austria Dr. Anna Lewandowska-Ciszek Poznan University of Economics and Business, Poland Dr. Damjan Maletič University of Maribor, Slovenia Prof. Marcela Malindzakova Technical University, Slovak Republic Prof. Józef Matuszek The Silesian Technical University Prof. Janusz Mleczko University of Bielsko-Biala Dr. Rami Mokao MIS - Management Information Systems, HIAST, Syria Prof. Maria Elena Nenni University of Naples, Italy Dr. Nor Hasrul Akhmal Ngadiman Universiti Teknologi Malaysia, Malaysia Dr. Dinh Son Nguyen University of Science and Technology, Viet Nam Dr. Duc Duy Nguyen Ho Chi Minh Technology University (HCMUT), Viet Nam Dr. Filscha Nurprihatin Sampoerna University, Indonesia Prof. ass. Filip Osiński Poznan University of Technology, Poland Dr. Ivan Pavlenko Sumy State University, Ukraine Robert Perkin BorgWarner, United States Prof. Alin Pop University of Oradea, Romania Prof. Ravipudi Venkata Rao National Institute of Technology, India Marta Rinaldi University of Campania, Italy Dr. Michał Rogalewicz Poznan University of Technology, Poland Prof. David Romero Tecnológico de Monterrey, Mexico Prof. Elmadani Saad Hassan First university of Settat, Morocco Prof. Krzysztof Santarek Warsaw University of Technology, Poland Prof. shankar sehgal Panjab University Chandigarh, India Dr. Robert Sika Poznan University of Technology, Poland Dr. Chansiri Singhtaun Kasetsart University, Thailand Prof. Bożena Skołud Silesian University of Technology, Poland Lucjan Sobiesław Jagiellonian University, Poland Dr. Fabiana Tornese University of Salento, Italy Prof. Stefan Trzcielinski Poznan University of Technology, Poland Amit Kumar Tyagi Centre for Advanced Data Science, India Dr. Cang Vo Binh Duong University, Viet Nam Dr. Jaroslav Vrchota University of South Bohemia České Budějovice, Czech Republic Dr. Radosław Wichniarek Poznan University of Technology, Poland Prof. Ewa Więcek-Janka Poznan University of Technology, Poland Prof. Josef Zajac Uniwersytet Techniczny w Koszycach, Slovak Republic Dr. Aurora Zen Universidade Federal do Rio Grande do Sul, Brazil

This page uses 'cookies'. Learn more