The paper refers to the specific functional area, which identity was primarily based on the relationship with water – in major port cities, as well as related smaller settlemets. It discribes the phenomenon of using and reinterpreting the potential of a rich hydrographic network for constructing the contemporary spatial identity after the violent events of the 20th century. The case studies cited are differentiated due to the specifi city of the activities and the purpose of its implementation.

The article presents results of the author’s bachelor thesis, which deals with detailed cataloguing and analysing of findings of so-called Scythian character in the Moravia in the late Early Iron Age period. The author based this article on catalogue from his thesis. Relevant analogies and typological assignments were studied for concerning every subject in the catalogue and on their basis there was made general chronological classification of each piece. The aim of this article is to present observations that resulted from a detailed evaluation, on its basis occurrence of the subjects of so-called Scythian origin in the Moravia were divided into three time horizons.

The article presents selected issues from the Polish Energy Policy draft until 2040. From many issues, the authors chose the ones they considered the most revolutionary. Firstly, the National Power System should be restructured to meet the challenges of a changing environment, be adapted to the growing demand for electricity, and at the same time have the least impact on the natural environment. These goals can be achieved through reforms to reduce the importance of coal in the energy mix and the development of renewable energy sources, especially offshore wind energy. The next tasks are the development of electromobility, enabling the reduction of pollution caused by transport, and, in the longer term, after 2030, the development of nuclear energy in place of the withdrawn coal power.

Integration of transport subsystems in transfer nodes of public transport in Poznań based on city railway stations, Poznań, being one of the strongest urban centers in the country, has a significant zone of impact (functional area). A natural consequence of this development model are significant communication issues caused by dynamic development of the suburban area. The solution of those issues is assumed to be basing the public communication system on a railway junction and, on its basis, creating the Poznań Metropolitan Railway. However, to ensure efficient functioning of such a system the need arises to integrate it with other systems of transport using transfer nodes. The aim of this article is to illustrate the potential of creating a polycentric system of multi-modal transfer nodes, based on existing city railway stations (district stations). The study focuses on the perspective of the passenger and the primary research method is the in-depth interview. This enabled to learn the opinion and identify the needs of passengers who use the facilities which are the subject of this study. The study also concentrated on analyzing thee communication behaviors of passengers and analyzing thee functioning of city stations themselves. Additionally, information was also acquired regarding the approximate destination of the passengers’ travel, which further allowed to specify the hypothetical impact range of individual city stations. Results of the study allowed to develop a range of recommendations intended to optimize the functioning of selected city railway stations, from a technical, as well as organization and management perspective. They have the potential to become a basis for developing a concept of sustainable public transport with a metropolitan reach.

The article describes the relationship between the local community and the primary school considered as “place” within the meaning derived from the book by yi-Fu Tuan “Space and place: The perspective of experience”. The article compares the cases of two schools in the city of bielsko-biała (the city has a population of 175 thousands inhabitants). One school is overcrowded, yet its future existence has been secured. The second school, however, was first transferred to another location and it eventually went into liquidation in 2012. The article demonstrates then underlying reasons and consequences of losing the school as place. Moreover, it indicates potential problems emerging in such cases altogether with a set of possible solutions.

The possibility of the application of nontraditional method of greenhouse gas utilization by the injection of CO2 (sequestration) into porous geological deposits, treated as unconventional gas collectors, requires the fulfillment of basic criteria such as the impact on the environment and long term storage. The important issue is the physical behavior of the deposit during the porous structure saturation phase by carbon dioxide. What should be mentioned first and foremost is: the availability of CO2 transport along the porous structure and adsorption capacity. The work presents the results of water vapor sorption on coal samples from selected Hard Coal Mines of a differentiated carbon content. The received results were presented in the form of sorption and desorption isotherms performed in a temperature of 303 K. It was additionally described with a BET adsorption isotherm. Based on sorption data, a specific surface area was calculated, in accordance with BET theory. The amount of the adsorbed water vapor molecules for the analyzed coal samples was dependent on the degree of metamorphism. The obtained isotherms can be described as type II according to the BET classification. Volumetric type apparatus -adsorption- microburette liquid was used for the sorption experiments. Water vapor sorption in relation to coals allows for the quantitative determination of primary adsorption centers as a measure of adsorbed molecule interconnections with the adsorbent surface. Based on the BET adsorption equation, out of water vapor isotherms, the amount of adsorption active centers, which potentially may take part in CO2 adsorption in coal seams during injection of this gas, was determined. The sorption capacity of coals is determined by the degree of metamorphism, which also has very large impact on the sorption capacity of the deposit.

This article presents the evolution of the approach to the indicative designation of revitalization areas in Poland at central, regional and local level. The introduction shows rational for monitoring of degradation in Polish cities, i.e. a continuous assessment of its condition, and not just the designation of areas where intervention is needed. Monitoring ensures the comparability of observations and allows to evaluate the results of undertaken measures. Without it, it is impossible to fully assess the effects of revitalization in the previous financial perspectives. The first chapter of the article outlines the requirements for determining areas for revitalization before 2013, the reasons for their adoption, and the indicators used in the delimitations at the time. The second chapter contains the results of a study carried out in the fi rst half of 2016 at the Institute of Urban Development concerning the designation of degraded areas and revitalization areas just after the entry into force of the revitalization law. The results of the study are conclusions confirming the use of cities, which first delimited the areas of revitalization from the possibility of individualizing the approach to the designation of those areas, which was introduced by the Guidelines and the law.

The complexity of the phenomena associated with the course of the cognitive processes that determine an efficient learning, excludes the possibility of collecting knowledge in other ways than neuronal-information. It excludes also possibilities of interpreting it, in other ways than with use of respectively formalized cognitive models. The presented paper is a kind of summary of the latest achievements in this field.

W artykule podjęto próbę systematyzacji sposobów konceptualizacji pojęcia kultury przez jej rzeczywistych i potencjalnych konsumentów. Rozumienie kultury traktujemy jako poznawczy element postawy, który jest powiązany z praktykami uczestnictwa w kulturze. Badania jakościowe, prowadzone w ramach ewaluacji Europejskiej Stolicy Kultury Wrocław 2016, pozwoliły zidentyfikować cztery odmienne sposoby rozumienia kultury, które określają nadawany jej sens, znaczenie oraz sposoby uczestnictwa. W konkluzjach omawiamy zasadnicze czynniki różnicujące podejście do kultury. Wskazujemy także, że skuteczna polityka zorientowana na zwiększanie uczestnictwa w kulturze nie może ograniczać się do tworzenia oferty, ale powinna uwzględniać także kształtowanie i upowszechnianie inkluzywnych sposobów rozumienia kultury.

Wiek skamieniałości roślin odkrytych w Górach Świętokrzyskich określa się na 444 mln lat, co zmienia nasz dotychczasowy pogląd o ich ewolucji, a przede wszystkim dowodzi, że pojawiły się one na lądzie znacznie wcześniej, niż sądzono.

The analysis of the current state of weather and climatic conditions and evaluation of their predicted changes for im-mediate and distant prospect in the drained areas of Ukrainian Polissia region was carried out in the article. The main trendsin changes of meteorological characteristics and their possible effect on the conditions of functioning water management and ameliorative objects and complexes as well as on the natural and ameliorative state of drained areas were identified. The research uses a method of predictive-simulation modelling with used predictive assessment models of normalized dis-tribution of the basic meteorological characteristics in the long-term and one-year vegetation context. According to the re-sults of the research it was established that, for today a high variability in meteorological characteristics can lead to the sig-nificant deterioration of operation conditions of water management and ameliorative objects and units, as well as natural and ameliorative conditions of drained lands in Polissia region as a whole. Core measures regarding the adaptive potential enhancement and development in the region under the conditions of climate change were examined.

Chitin deacetylase is the only known enzyme which is able to deacetylate N-acetyl-D-glucosamine units in chitin or chitosan chains. As chitin can hardly be dissolved in organic/inorganic solvents, new solvents are still searched. Ionic liquids are promising for that application and for homophase enzymatic deacetylation. The aim of the work was to investigate the influence of selected ionic liquids on activity of chitin deacetylase.

It has been shown that [Amim] ionic liquids increase the activity of chitin deacetylase. The highest activity was observed for [Amim][Cl]. Ionic liquids with shorter (ethyl (C2)) and longer side chain (buthyl (C4)) only insignificantly influenced the activity of the enzyme. All tested ionic liquids with [Br] anion increased the activity of chitin deacetylase while the [Emim] and [Bmim] cation in combination with [Cl] anion inhibited the activity of the enzyme.

The results of statistical analysis applied in order to evaluate the effect of the high melting point elements to pressure die cast silumin on its tensile strength Rm, unit elongation A and HB were discussed. The base alloy was silumin with the chemical composition similar to ENAC 46000. To this silumin, high melting point elements such as Cr, Mo, V and W were added. All possible combinations of the additives were used. The content of individual high melting point additives ranged from 0.05 to 0.50%. The tests were carried out on silumin with and without above mentioned elements. The values of Rm, A and HB were determined for all the examined chemical compositions of the silumin. The conducted statistical analysis showed that each of the examined high melting point additives added to the silumin in an appropriate amount could raise the values of Rm, A and HB. To obtain the high tensile strength of Rm = 291 MPa in the tested silumin, the best content of each of the additives should be in the range of 0.05-0.10%. To obtain the highest possible elongation A of about 6.0%, the best content of the additives should be as follows: chromium in the range of 0.05-0.15%, molybdenum 0.05% or 0.15%, vanadium 0.05% and tungsten 0.15%. To obtain the silumin with hardness of 117 HB, chromium, molybdenum and vanadium content should be equal to about 0.05%, and tungsten to about 0.5%.

The Ca50Mg20Zn12Cu18 was assessed with different methods in order to characterize its basic characteristics, and to determine whether the amorphous alloy of such composition would be applicable as an implant material. The XRD analysis was conducted to conclude the structure of the initial material. The Ca50Mg20Zn12Cu18 ingot sample demonstrates crystalline structure containing two main intermetallic phases, however as-cast plates show features of an amorphous material, revealing the characteristic amorphous halo on the x-ray patterns. It was confirmed by the scanning electron microscopy method and fracture images revealing chevron pattern morphology with shell type fracture. Corrosion resistance, was studied using the potentiostatic analysis. The amorphous samples show higher resistance than the crystalline one. Post corrosion surface of the Ca50Mg20Zn12Cu18 alloy exhibits high concentration of magnesium and calcium hydroxides, forming the globular structures in large aggregates of spherical units.