Steel-concrete composite beam has been increasingly applied to large span cable-stayed bridges. It takes full advantage of the material properties of steel and concrete. However, the concrete deck bears tension in the negative moment zone, such as zero block, which is disadvantageous to structures. Aiming at this problem, a finite element model of the zero block in the negative moment zone of a semi-floating cable-stayed bridge is built, and the local mechanical performance of the bridge deck under completed status is studied. Based on the analysis results, three improvement measures have been proposed. The improvement effect of each method and composed of three methods has been studied. The numerical results show that the whole zero block zone is in the compressed state under the combined action of the bending moment and axial force of the stay cable. However, the local negative moment effect in the zero block zone is very prominent under the support of the diaphragm plate. Removing parts of the diaphragm plate at the bearing position can significantly improve local mechanical behavior in the concrete deck, which transfers the local support to the adjacent two diaphragm plates. The composed improvement effect is prominent when the three measures are adopted simultaneously.

Two-way curved arch bridges inherit the fine tradition of masonry structures, making full use of the advantages of prefabricated assembly, it adapts to the situation of no support construction and no large lifting machine and tools, and has the characteristics of convenient construction method and saving material consumption. In appearance, the two-way curved arch bridge has strong national cultural characteristics. The prefabricated components of the two-way curved arch bridge are fragmentary, complicated in bearing and poor in integrity. Most of the two-way curved arch bridges in service have been built for a long time and lack of maintenance and management. Increasing the cross-section reinforcement method is one of the two-way curved arch reinforcement methods. It has a significant effect, convenient construction, good rigidity and stability characteristics after the reinforcement. Through theoretical analysis, combined with a static load test results of the assessment of the bridge reinforcement effect. Through load test, it is found that the deflection of the arch rib after reinforcement is reduced by 9%~19% and the strain of the arch rib is reduced by 12%~22%. Through finite element calculation, the crack width of the reinforced arch rib decreases by 8.3%~14.2%. The results show that the stress and deflection are greatly improved by the method of increasing section.

Concrete-filled steel tube arch bridge is filled with concrete inside the steel tube. The radial constraint of the steel tube limits the expansion of the compression concrete, which makes the concrete in the three-way compression state, thus significantly improving the compressive strength of the concrete. At the same time, it can simplify the construction process and shorten the construction period. Since the rapid development of concretefilled steel tubular tied arch bridge in the 1990s, a large number of such Bridges have suffered from the defects of steel concrete, loose tie rod, and hanger rod rust, etc. Therefore, the reinforcement technology for various diseases has been studied, among which the reinforcement technology for hanger rod replacement is the most complicated and more difficult. As more and more bridges of this type enter the period of reinforcement, it ismore and more urgent to study the reinforcement technology of suspenders. Taking a bridge that has been in service for 23 years as an example, this paper discusses the construction method and construction monitoring of replacing the suspender, so as to guide the construction monitoring of the bridge. Finally, the construction monitoring results of the bridge are given, which can provide reference for the replacement of the suspender of this type of bridge.