Infrared (IR) science and technology has been mainly dedicated to surveillance and security: since the 70’s specialized techniques have been emerging in thermal imaging for medical and cultural heritage diagnostics, building and aeronautics structures control, energy savings and remote sensing. Most of these applications were developed thanks to IR FPAs sensors with high numbers of pixels and, actually, working at room temperatures. Besides these technological achievements in sensors/ receivers, advanced developments of IR laser sources up to far IR bands have been achieved in the form QCL (quantum cascade laser), allowing wide band TLC and high sensitivity systems for security. recently new sensors and sources with improved performances are emerging in the very far IR region up to submillimeter wavelengths, the so called terahertz (THz) region.
A survey of the historical growth and a forecast of the future developments in Devices and Systems for the new frontier of IR will be discussed, in particular for the key questions: “From where and when is IR coming?”, “Where is it now?” and “Where will it go and when?”. These questions will be treated for key systems (Military/Civil), key devices (Sensors/ Sources), and new strategic technologies (Nanotech/TeraHertz).
The following discussion concerns modelling of fracture in steel plates during an impact test, in which both target and striker are manufactured from the same material, high-strength high-hardness armour steel – Mars® 300. The test conditions (3 mm thick targets, projectiles with different nose shapes at impact velocity lower than 400 m/s) result in severely damaged components, which results in an analysis of stress states showing material failure. Numerical analyses are performed using two material models: the Johnson-Cook approach, as traditionally used in impact simulations, accounting for the effect of stress triaxiality, strain rate and temperature and for comparison, a simulation by means of the stress triaxiality and Lode angle parameter-dependent Hosford-Coulomb model, also incorporating the effect of the strain rate on a fracture initiation. The aim of the study is to analyse the mechanisms of penetration and perforation observed in the armour steel plates and validation of the modelling approaches.
Recently, aluminum matrix syntactic foams (AMSFs) have become notably attractive for many different industrial areas like automotive, aerospace, construction and defense. Owing to their low density, good compression response and perfect energy absorption capacity, these advanced composite materials are also considered as strong alternatives to traditional particle reinforced composites and metal foams. This paper presents a promising probability of AMSF fabrication by means of industrial cold chamber die casting method. In this investigation, contrary to other literature studies restricted in laboratory scale, fully equipped custom-build cold chamber die casting machine was used first time and all fabrication steps were designed just as carried out in the real industrial high pressure casting applications. Main casting parameters (casting temperature, injection pressure, piston speed, filler pre-temperature and piston waiting time) were optimized in order to obtain flawless AMSF samples. The density alterations of the syntactic foams were analyzed depending upon increasing process values of injection pressure, piston speed and piston waiting time. In addition, macroscopic and microscopic investigations were performed to comprehend physical properties of fabricated foams. All these efforts showed almost perfect infiltration between filler particles at the optimized injection parameters.
The problem of performing software tests using Testing-as-a-Service cloud environment is considered and formulated as an~online cluster scheduling on parallel machines with total flowtime criterion. A mathematical model is proposed. Several properties of the problem, including solution feasibility and connection to the classic scheduling on parallel machines are discussed. A family of algorithms based on a new priority rule called the Smallest Remaining Load (SRL) is proposed. We prove that algorithms from that family are not competitive relative to each other. Computer experiment using real-life data indicated that the SRL algorithm using the longest job sub-strategy is the best in performance. This algorithm is then compared with the Simulated Annealing metaheuristic. Results indicate that the metaheuristic rarely outperforms the SRL algorithm, obtaining worse results most of the time, which is counter-intuitive for a metaheuristic. Finally, we test the accuracy of prediction of processing times of jobs. The results indicate high (91.4%) accuracy for predicting processing times of test cases and even higher (98.7%) for prediction of remaining load of test suites. Results also show that schedules obtained through prediction are stable (coefficient of variation is 0.2‒3.7%) and do not affect most of the algorithms (around 1% difference in flowtime), proving the considered problem is semi-clairvoyant. For the Largest Remaining Load rule, the predicted values tend to perform better than the actual values. The use of predicted values affects the SRL algorithm the most (up to 15% flowtime increase), but it still outperforms other algorithms.
Shear connectors are designed in steel-concrete composite construction to transmit the longitudinal shear, to prevent separation of steel and concrete slabs, and also to increase the structural efficiency of the whole system. In this study, the performances of different types of shear connectors in steel-concrete composite specimens are evaluated by conducting push-out tests under monotonic loading conditions. An ISMB 200 @ 25.4 kg/m universal steel beam measuring 400 mm and a reinforced cement concrete slab measuring 300 mm with a breadth of 200 mm and a thickness of 200 mm reinforced with 8 mm diameter steel rods are used for the experimental study. The results reveal that the load-slip relationships for various types of shear connectors and failure mechanisms are obtained to identify those shear connectors which are more relevant to the steel – concrete composite members.
The web-tapered I-columns have the capacity to resist the flexural buckling and lateral torsional buckling at a particular location where as in the rest of the member the capacity is lower. There needs a focusing on the nonprismatic members, to find the buckling capacity and standard procedures are to be framed in Indian Code IS 800:2007. This exploratory research explores simulated finite element models covering a total of 60 web tapered column sections having taper ratios (h2/h1) from 1.0 to 3.0 using FEA software ANSYS17.2. With an elaborate Eigenvalue buckling analysis, this research has come up with newer design equation for calculating the buckling load of web tapered I columns. This novel equation could predict the buckling stress for any taper ratio of web tapered I column of any length.
Polish exploration and exploitation of marine resources of Antarctic waters date back to the reconnaissance cruise of the Sea Fisheries Institutes (SFI) r/v Profesor Siedlecki in 1974. Since 1975, a co-operation between the Institute of Ecology, Polish Academy of Sciences (PAS) at Dziekanów Leśny and SFI in Gdynia with participation of the University of Agriculture in Szczecin, Faculty Marine Fisheries and Food Technology (UA) was established. Fishing fleets of the Polish Deep-Sea Fisheries Companies Odra, Dalmor and Gryf, since 1976 were operating in the Atlantic sector of Antarctic waters, south of the convergence.
Here are reported the first certainly indigenous agglutinated foraminifera known for the Eocene La Meseta Formation on Seymour Island, West Antarctica. The specimens were identified as Textularia sp. and occur in the upper portion of the unit, just below the contact with the overlying post-Eocene deposits. Despite being rare, the specimens are interpreted as autochthonous or parautochthonous due to their overall good preservation, fragility, and lack of sedimentary filling. The La Meseta Formation seems to have passed through a major diagenetic dissolution of calcareous microfossils, but the present findings suggest that indigenous agglutinated foraminifera can be found at least in some of its strata.
Anestrus is essential to an unsuccessful pregnancy in dairy cows. One of the many factors that influences anestrus is the inactive ovary. To characterize in detail the plasma metabolic pro- file, anestrus cows suffering from inactive ovaries were compared with those with natural estrus. The Holstein cows 60 to 90 day postpartum in an intensive dairy farm were assigned into inactive ovaries groups (IO, n=20) and natural estrus group (CON, n=22) according to estrus signs and rectal palpation of ovaries. Plasma samples from two groups of cows were collected from the tail vein to screen differential metabolites using gas chromatography/mass spectrometry (GC/MS) techniques and multivariate statistical analysis and pathways. The results showed that 106 compounds were screened by GC/MS and 14 compounds in the IO group were decreased by analyzing important variables in the projection values and p values of MSA.Through pathway analysis, 14 compounds, mainly associated with carbohydrate metabolism and amino acid meta- bolism, were identified to results in IO, which may seriously affect follicular growth. Metabolo- mics profiling, together with MSA and pathway analysis, showed that follicular growth and development in dairy cows is related to carbohydrate and amino acid metabolism by a single or multiple pathway(s).
An attempt was made in the present work to study the compressive strength and microstructure of geopolymer containing high calcium fly ash (HCFA) and silica fume. Concentration of sodium hydroxide solution 8M, 10M, 12M & 14M, liquid to binder ratio 0.5 and sodium hydroxide to sodium silicate ratio 2.5 were selected for the mixes. Geopolymer mortar test results indicated that the mix with 40% silica fume by the weight of HCFA yielded higher compressive strength under ambient curing. The XRD pattern typically shows the major portion of amorphous phase of geopolymer. The existence of C-A-S-H gel, N-A-S-H gel and hydroxysodalite gel products were observed through SEM which developed dense microstructure and thus enhanced strength of HCFA and silica fume geopolymer.
Infrared (IR) reflectography has been used for many years for the detection of underdrawings on panel paintings. Advances in the fields of IR sensors and optics have impelled the wide spread use of IR reflectography by several recognized Art Museums and specialized laboratories around the World. The transparency or opacity of a painting is the result of a complex combination of the optical properties of the painting pigments and the underdrawing material, as well as the type of illumination source and the sensor characteristics. For this reason, recent researches have been directed towards the study of multispectral approaches that could provide simultaneous and complementary information of an artwork. The present work relies on non−simultaneous multispectral inspection using a set of detectors covering from the ultraviolet to the terahertz spectra. It is observed that underdrawings contrast increases with wavelength up to 1700 nm and, then, gradually decreases. In addition, it is shown that IR thermography, i.e., temperature maps or thermograms, could be used simultaneously as an alternative technique for the detection of underdrawings besides the detection of subsurface defects.
Reference intervals (RIs) are one of the essential elements in the procedure of disease diagnosis. This is especially true for feline species in which RI is less available than in canine species. RIs are affected by biological, geographical and instrumental factors, yet published RIs with incomplete background are popularly used. Inappropriate interpretations of RIs may affect classification of disease and subsequent treatment. In this study, we demonstrated the step-by-step establishment of feline RIs following the American Society for Veterinary Clinical Pathology (ASVCP) reference interval guideline. A total of 51 parameters were examined, including 20 hematology and 31 biochemistry parameters, and the results were compared to one local RI and two foreign RIs. Overall, about 29% (10/35) of tested parameters were different form local RIs and 60% (30/50) were different from the two foreign RIs, highlighting geographical variations. A higher upper reference limit (URL) in red blood cell count (RBC), hematocrit (Hct), Hemoglobin (Hgb), albumin, creatinine and lower URL in potassium and white blood cell count (WBC) were identified, which may impact the interpretation. In addition, statistical analysis of age and gender were factored separately and indicated that 10 parameters were significantly higher in the adult group. For the impact of gender, percentage of basophil and total iron-binding capacity (TIBC) were lower in female and male cats, respectively. In conclusion, we have demonstrated that it is desirable to establish in-house RIs or RIs of local sources. An age specific RI for the geriatric feline population is advisable for better diagnosis and monitoring the disease.
In this paper we have studied the driftless control system on a Lie group which arises due to the invariance of Black-Scholes equation by conformal transformations. These type of studies are possible as Black-Scholes equation can be mapped to one dimensional free Schrödinger equation. In particular we have studied the controllability, optimal control of the resulting dynamics as well as stability aspects of this system.We have also found out the trajectories of the states of the system through two unconventional integrators along with conventional Runge-Kutta integrator.
The paper presents a method of measuring deformations of cylindrical samples on the testing machine for free tube hydroforming experiments. During experiments a sample made of a thin-walled metal tube is expanded by the internal pressure of the working liquid and additionally subjected to axial compression. This results in a considerable circumferential deformation of the tube and its shortening. Analysis of the load cases and their impact on the deformations can be helpful in determining e.g. tube material properties or general limiting conditions in the tube hydroforming process. In connection with the above, the value of deformations and knowledge of their course during experiment has become one of the most important problems related to the issue described above.
The chronic degenerative endometritis (CDE) is recognised as directly related to age and infertility in the mare. In this study, the 14 days post ovulation (PO) pregnancy rate was assessed in 60 barren mares affected by CDE, submitted to platelet-rich-plasma intrauterine infusion (PRPI) 24 hours PO. Data showed a significant positive effect of PRPI on the chance to become pregnant in mares affected by Kenney I-II CDE. The overall 14 days PO pregnancy rate was 75%. Sixty-nine % of the overall pregnancies was achieved with the 1st PRPI, but an additional 31% was obtained with the 2nd PRPI at the subsequent heat, increasing significantly the number of pregnancies. Although the 1st PRPI lead to a higher pregnancy rate than the 2nd PRPI (52 vs 23%), the repetition of the treatment had a significant positive effect on the overall pregnancies. Mare’s young age positively influenced the chance to become pregnant and was associated to endometritis Kenney I. Mares with endometritis Kenney I had better chance to become pregnant than those with endometritis Kenney II. The PRPI proved, therefore, to be beneficial in barren mares with CDE, and resulted in high overall pregnancy rate achievement in barren mares.