Search results

Filters

  • Journals
  • Authors
  • Contributor
  • Keywords
  • Date
  • Type

Search results

Number of results: 1536
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

This article presents the results of studies assesing the significance of the most important macro- and microeconomic factors affecting investors’ propensity to invest in mining. The Polish mining industry in recent years has seen intensive restructuring processes which have considerably affected the status of fixed assets required for the exploitation of useful minerals. In order to efectively manage technological progress in mining plants, it is necessary to understand the role of individual, variable factors influencing investors’ propensity tomake specific expenditures. In the analysis, mathematical statistics and econometric modelling methods were applied to determine the nature of correlations between the values studied and their significance. This examination applied statistical data accumulated by economic entities from 2000–2010. A linear econometric model waspresented illustrating the relationship between capital expenditure in mining and such indicators as fixed assetsvalue, GDP, real interest rate, consumption levels of fixed asset components in mining, and various other factors. Structural parameters of a function specifying the level of investment expenditure can be determined based on statistical data which has been appropriately processed so that the model constructed reflects the economic process studied in relevant way.

Such a model is not free of defects typical in statistical models; however, it simultaneously enables one toobtain valuable information concerning the impact of the factors studied on the value of such expenditure, and the theoretical possibilities to exchange the specific quantity of one factor for another factor. In the final version of the model, it is often sufficient to include only these independent variables which contribute the most essential information to the independent variable. This often simplifies the final form of the model without simultaneous limiting of its importance in explaining the economic phenomenon studied and the possibilities of its practical application. In the final selection of significant variables captured in the model, the method of information capacity indicators was used.

Go to article

Authors and Affiliations

Tadeusz Franik
Download PDF Download RIS Download Bibtex

Abstract

This article concerns the issues of modeling and the optimizational approach for the performance of ore comminution circuits. A typical, multi-stage comminution circuit was analyzed with the high-pressure grinding rolls unit operating at a fine crushing stage. The final product of the circuit under investigation was, at the same time, a flotation feed in which particle size distribution initially determined the effectiveness of flotation operations. In order to determine the HPGR-based comminution circuit performance, a suitable mathematical model was built wherein the target function was linked directly with the effectiveness of the flotation processes. The target function in the presented model considers the issue in terms of the flotation operation’s effectiveness. The particle size distribution of individual comminution products and resulting from the weight recoveries of individual size fractions were criteria determining the quality of the comminution product. Weight recoveries of individual size fractions, in turn, were tied with the technical operating parameters of individual comminution devices. In the first model, profit maximization was the target function, while the second variant of the model took into account maximization of the useful mineral weight recovery in the concentrate. The HPGR application into ore processing circuits also results in energy saving benefits which were presented in a comparative analysis of the energy consumption of two comminution circuits – the first based on conventional crushing devices, and the second on the HPGR unit application which replaced the rod mills. The main benefit of such a modernization was almost two times lower energy consumption by the fine crushing stage and a decrease in the ball mills’ grinding operations load through bypassing a part of the material directly for the rough flotation operations.

Go to article

Authors and Affiliations

Daniel Saramak
Download PDF Download RIS Download Bibtex

Abstract

The paper concerns the accuracy of determining particle size distributions of the fine-grained materials by means of laser diffraction method. Selection of measuring method for determination of materials granulation depends on various properties of the sample, but mainly on the range of particle size in the sample. It must be taken into consideration that each of the measurement methods inherently generate different information about particle size distribution. The applied measurement method generates the main impact on the results of research because it uses various material properties, like: geometric properties, density or type of the surface (porosity).

Influence of density and particle shape on the results of measurements by laser diffraction was studied in the paper. This method becomes a standard for measuring particle size of mineral powders. Analysis of raw materials particle size distribution was performed using a laser particle-meter Analysette 22. Investigations included measurements of particle size of raw materials characterized by various densities (coal, porphyry, barite) and the shape of the particles (copper shale ore, fly ash from coal combustion). The density of raw materials was determined by helium pycnometer, while the particle shape was expressed by coefficient which was calculated on the basis of particles geometric parameters. Geometry of the grains was measured using an optical microscope with a digital record of images by means of image analysis method. The accuracy of laser granulometric analyzes was expressed by variation coefficient of narrow particle fractions contents. Results of analyzes confirmed that the laser granulometric analysis provides accurate information about the finestparticle size distribution. No significant effect of the material density on the accuracy of granulometric analysis was observed. Effect of particle shape of the tested materials caused more stable values of the variation coefficient for particles of more spherical shape what is related to the applied method of laser measurement. The accuracy of laser granulometric analyzes varies dependably on the measured particle size range of particles. The most accurate analyzed materials are these ones being the part of narrow particle fractions.

Go to article

Authors and Affiliations

Damian Krawczykowski
Aldona Krawczykowska
Kazimierz Trybalski
Download PDF Download RIS Download Bibtex

Abstract

Anisotropy of variations of Polish mineral deposit parameters is rarely the subject of interest of geologists who carry on the assessment projects . However, if the anisotropy is strong its description and mathematical modeling are rational and justified as it may affect the accuracy of many calculations suitably for mining geology and mining engineering, e.g. estimation of resources and grade of particular raw-material, interpolation of deposit parameters values and construction of their contour maps, designing of optimum grade mining operations or densification of sampling grid. In geostatistics anisotropy is described with directional semivariograms which represent average variability of values of particular deposit parameter in various directions, depending on the distance between sampling sites. Convenient graphic presentation of anisotropy is map of directional semivariograms and good mathematical presentation are functions describing the anisotropy models.

The paper presents the results of geostatistical descriptions of various anisotropy types in selected examples of Polish mineral deposits. Taking into account the spherical variability model, the influence of anisotropy on the results of deposit parameters estimations has been theorized for both the interpolation point and calculation block (area). It was found that anisotropy is effective for parameters estimation if three mutually interrelated factors are considered: power of directional diversification of parameters variation, contribution of random component to total, observed variation of parameters and the range of semivariograms (autocorrelation) of parameter referred to the average sampling grid density.

The results demonstrate that anisotropy influences much more the estimations of parameters value in interpolation points than those of average values of parameters calculated for particular parts of deposit (calculation blocks). Moreover, anisotropy is unimportant when the random component of variability dominates the overall variability of analyzed parameter. Therefore, the simpler, isotropic variability model can be applied to geostatistical estimations of deposit parameters.

Go to article

Authors and Affiliations

Jacek Mucha
ORCID: ORCID
Monika Wasilewska-Błaszczyk
ORCID: ORCID
Download PDF Download RIS Download Bibtex

Abstract

This article presents values of porosity and compression strength of hard coals from the area of the Upper Silesian Coal Basin. The change of the stage of carbonification, which results from conversion of coal substance in the process of coalification, is a source of many changes in the structure of coal. These changes exert influence on values of physical parameters, including the values of porosity and strength. Porosity and compression strength change with the degree of carbonification, a result of the depth of deposition. This study determined the values of effective porosity of coals and their strength considering the age chronology of coal seams and the depth of their occurrence. It examined coals of the Cracow Sandstone Series, the Mudstone Series, the Upper Silesian Sandstone Series, and the Paralic Series from depths ranging from about 350 m to 1200 m. The authors have shown that effective porosity of the Upper Silesian coals changes for particular stratigraphic groups and assumes values from a few to a dozen or so per cent, while compression strength from several to several dozen megapascals. It has been observed, from a chronostratigraphic perspective, that there is a shifting of the upper and lower limits of intervals of porosity variations towards higher values for younger coals. With the increase in compression strength, value of porosity in particular stratigraphic groups generally decreases. However, no regular changes were observed in mean, uniaxial compressive strength with the increase in the age of subsequent stratigraphic groups. On the other hand, for bright coal and semi-bright coal, a visible decrease in compression strength with the depth of deposition of strata was observed.

Go to article

Authors and Affiliations

Mirosława Bukowska
ORCID: ORCID
Urszula Sanetra
Mariusz Wadas
Download PDF Download RIS Download Bibtex

Abstract

Fly-ash is a form of production waste produced as a result of the burning of coal for energy production. Millions of tonnes of this waste are produced worldwide every year; hence it is extremely important to dispose of it in a useful way, including through treating the initial raw material to obtain a material of higher quality. The aim of the present work is to determine the suitability of processed fly-ash from lignite for reinforcing (stabilizing) soils used in the building of road foundations and embankments. The results provide a method of recycling this waste while at the same time obtaining new materials and technologies for use in road building. This is an important issue both environmentally and in terms of the positive effect that processed fly-ash can have on the stability of road structures.

This article presents the results of experiments carried out using fly-ash produced from lignite at the P¹tnów Power Plant. This ash was first modified (activated) using a Wapeco magnetic activator, and then used to produce hydraulic binders (with the addition of cement) and soil-binder mixtures. These mixtures were made using natural soils from seven different deposits in the Lubuskie region (western Poland). They were stabilized using two hydraulic binders (strength ratings 3 MPa and 9 MPa) added in different amounts (6% and 8% relative to the mass of the soil). During the experiment, a determination was made of the increase in the strength of the analysed samples (after 14, 28, and 42 days) and the increase in the bearing ratio (immediately after consolidation and after 7 days).

Interpretation of the results of the experiment made it possible to assess the dynamics of the increase in compression strength and load-bearing capacity of various soils stabilized with hydraulic binders produced from lignite ash, and to indicate possibilities for the use of these materials.

The analysis showed that it is possible to use these binders for the stabilisation of soils, enabling soils formerly considered to have weak load-bearing capacity (clayey sand; clayey, sandy gravel; clays) to be classified as fully usable in road construction.

Go to article

Authors and Affiliations

Urszula Kołodziejczyk
Michał Ćwiąkała
Aleksander Widuch
Download PDF Download RIS Download Bibtex

Abstract

Each year, mine and mill operations generate enormousamounts of two waste types – fine-grained tailings andcoarse-grained waste rocks. Fine-grained tailings are either discharged in slurry form to surface tailings dams ordelivered in cementitious form to underground mine stopes as backfilling, while coarse-grained rocks are typicallystored by depositing as a dry material in large dumps. The engineering design of surface tailings dams orunderground mine stopes is often controlled by the high compressibility and low shear strength characteristics offine-grained tailings. Cemented paste backfill CPB indicating saturated, fine-grained backfills can undergo majorconsolidation settlement during early curing stages. Thus, a better understanding of the rate and magnitude of bothdifferential and total settlement of CPB cured under stressis essential for a proper backfill geotechnical design. Theconsolidation parameters of CPB can be determined from an improved lab setup called CUAPS (curing underapplied pressure system). This setup is capable of simulating the CPB placement and curing conditions, andmeasuring the consolidation parameters of CPB cured under effective stresses ranging between 0.5 and 400 kPa.In this study, a series of one-dimensional consolidation tests were conducted on CPB samples allowing forexamination of the effects of binder type and rate as well as curing time on the compression properties (e.g.,coefficient of consolidationcv, compression indexCc, and recompression indexCr) and the final geotechnicalindex properties (e.g., void ratioef, water contentwf, and degree of saturationSf). Results showed that as the bindercontent increases, the initial resistance to consolidation increases. Thecvvalue decreases over the course of timedue to evolution of the CPB microstructure generated by the hydration process.

Go to article

Authors and Affiliations

Erol Yilmaz
Tikou Belem
Mostafa Benzaazoua
Download PDF Download RIS Download Bibtex

Abstract

Requirements for environmental protection, such as reducing emissions of CO2, NOx, and SO2 are the reason for growing interest in new technologies for coal utilization. One of the most promoted technologies is coal gasification. However, like any technology using coal, this process produces wastes – fly ash and slag. Due to the small number of coal gasification plants, these wastes are poorly understood. Therefore, before making decisions on the introduction of coal gasification technology, a waste utilization plan should be developed. This also applies to the slags formed in underground coal gasification technology. One of the options under consideration is to use these wastes as a component in mineral binders of a pozzolanic character. This paper compares the properties of two types of slags. The first slag (MI) comes from fuel gasification, and the second slag (BA) is from underground coal gasification. Slag MI can be classified as basic slag with a chemical composition similar to that of silica fly ash from coal combustion. Slag BA – because of its four times greater content of calcium oxide – belongs to a group of weakly basic slags. The main and only mineral component of slag MI is glassy phase. Slag BA forms – besides the glassy phase – crystalline phases such as mullite (3 Al2O3 · 2 SiO2), quartz (-SiO2), anorthite (Ca(Al2Si2O8)), gehlenit (Ca2Al[(Si,Al)2O7]), wollastonite (Ca3[Si3O9]), 2CaO · SiO2, and 4 CaO · Al2O3 · Fe2O3. The results of analyses have shown that slag BA has better pozzolanic properties (the pozzolanic activity index is 75.1% at 90 days) than slag MI (69.9% at 90 days) The preliminary studies lead to the conclusion that these slags are characterized by very low pozzolanic activity and cannot be used as a pozzolanic material.

Go to article

Authors and Affiliations

Maciej Mazurkiewicz
Ewelina Tkaczewska
Radosław Pomykała
Alicja Uliasz-Bocheńczyk
ORCID: ORCID
Download PDF Download RIS Download Bibtex

Abstract

Due to the occurrence of zinc and lead ore deposits in dolomite rocks, the sphalerite concentrates obtained from these ores contain an admixture of dolomite. In practice, a substantial amount of magnesium included in zinc ores passes to the last production stage, i.e. zinc electrolysis. The magnesium present in electrolyte impairs electrical conductance and appears in the technical and economical indexes. This paper deals the attempts to remove magnesium removal from initial sphalerite concentrates by means of chemical flotation using spent electrolyte derived from zinc electrolysis. The authors attempt to substantiate the existing relationships, as well as to derermine the optimum conditions for the procedure suggested. The leaching efficiency of magnesium amounted to about 80%, and is dependent upon the stage of the leaching. Losses of zinc were below 2%, and the magnesium concentration in solution amounted to about 20%. These solution can produce magnesium and zinc, which will be presented in the following paper.

Go to article

Authors and Affiliations

Andrzej Jarosiński
Adam Kozak
Sylwester Żelazny
Piotr Radomski
Download PDF Download RIS Download Bibtex

Abstract

The quality of coal has been analyzed basing on the data from geological exploration and chemical – geological analyses of coal carried out on the samples obtained from the boreholes and mining pits. The operated coal seams indexed as 382 and 385/2 reveals the changeable morphology due to the thickness of carbon shoals and stent intergrowths. The other parameters, such as the ash content or the calorific value are strongly linked with the non-coal rock interlayers, which presence causes the decrease in the calorific value and increase in the amount of after-burning ash. These parameters are less dependable on the sedimentation environment of the coal formation material. The content of total sulfur in the analyzed seams does not show any link with the values of the parameters analyzed before. The total sulfur is made up from sulphide gathered in coal and sulphates deriving from the decomposition of plants and supplied by deposit waters in different phases of coal seam formation. The obtained results could be useful in the reconnaissance of the prospective seams lying below the currently exploited ones (e.g. 389) and the seams in the neighboring areas.

Go to article

Authors and Affiliations

Jacek Misiak
ORCID: ORCID

Authors and Affiliations

Tadeusz Markowski
Maciej Turała
Download PDF Download RIS Download Bibtex

Abstract

In the construction industry carbonate aggregates are commonly used in processes such as concrete production. Aggregates which contain (in their mineral composition) dolomite and an admixture of clay minerals and amorphous silica , can react with alkalis. These reactions can lead to a destructive expansion in concrete. This article explains the mechanisms and the essence of this phenomenon. What is more, some effective and fast methods of the estimation and evaluation of Polish aggregates consisting of carbonate rocks suggests effective methods to determine the usefulness of Polish carbonate aggregates in concrete production are discussed in the paper. Underneath the quality criteria to determine the reactivity of the aggregates will be given. It has been agreed that alkaline reaction and expansion are two separate phenomena related to each other genetically. The aggregates in which reactions caused by clay-siliceous admixtures occur are subjected to expansion. Mineral composition of expansive aggregates as well as their texture indicate that epigenetic dolomites with a distinctive texture are the most reactive. The phase transformations do not end with a complete disintegration of dolomite. They have a cyclical character. They consist of interchangeable reactions of dedolomitization and dolomitization of secondary calcite formed as a result of dolomite's disintegration. The secondary calcite can be effected by Mg+2 ions from pores' solutions and it can form a secondary dolomite. The Mg2+ ions originate from brucite [Mg(OH)2], created in dolomitization process. As a consequence of its reaction with silica, brucite can dissolve and enrich secondary calcite with magnesium. Therefore the reactions which take place in reactive carbonate aggregates and concrete that ismade of it are in fact ongoing processes which consist of dolomite's changes into calcite and vice versa. They are reactions between dedolomitization products (brucite, silica) and products from outside (water, alkalis). The described dedolomitization reactions are a phase of the process that enables expansion due to formation of pressure in inter-granular cracks, with pressure being a result of dry clay-minerals' expansion under the influence of water solutions. Loosening of the aggregate's structure as an effect of dedolomitization reaction makes it easier for water solutions to migrate far into the aggregate's grains followed by their contact with clay minerals.

Go to article

Authors and Affiliations

Stefan Góralczyk
Download PDF Download RIS Download Bibtex

Abstract

The application of enhanced oil recovery processes (EOR – Enhanced Oil Recovery) on oil fields increases recovery efficiency. This is especially important in depleted and mature fields. This should result in an increase in production by raising the recovery factor (the ratio of oil produced to total geological reserves). This review presents the growing trend of gas injection (particularly carbon dioxide). In Polish oil fields, conventional methods are currently used. This means that much can still be done in this area. The selection of the optimum method for a given field is a complex procedure consisting of many stages, from collecting data about the field, through more advanced data interpretation, to working out a detailed proposal for the most efficient method of extraction. The pre-selection stage involves excluding methods which, owing to their specific mechanisms, cannot be used for a particular field – e.g. thermal methods in light oil fields or nitrogen injection into shallow reservoirs. This paper analyzes the potential for the application of EOR methods in Poland using a binary technical screening method. Forty-nine, mature Polish oil fields were analyzed. Apart from the rock type, other parameters were also taken into account in the analysis as follows: oil density and viscosity, average porosity, permeability and thickness of the reservoir, and also depth of deposit. In regard to the criteria for the EOR methods applied, the subjects of analysis are oil fields with medium density and viscosity and low permeability (double porosity in carbonate rocks), which are at a relatively shallow or medium depth of deposit. The results of analysis show that gas injection methods, especially carbon dioxide or nitrogen, have the highest potential. Application of this method must be preceded by detailed research and field pilot tests. International experience cannot be applied directly to Poland because of different field characteristics as well as technological and economic conditions.

Go to article

Authors and Affiliations

Paweł Wojnarowski
Download PDF Download RIS Download Bibtex

Abstract

Geothermal waters are a source of clean energy. They should be used in a rational manner especially in energyand economic terms.

Key factors that determine the conditions in which geothermal waters are used, the amount of energy obtainedand the manner in which cooled water is utilised include water salinity. Elevated salinity levels and the presence oftoxic microelements may often lead to difficulties related to the utilisation of spent waters. Only a few Polishgeothermal facilities operate in a closed system, where the water is injected back into the formation after havingbeen used. Open (with water dumped into surface waterways or sewerage systems) or mixed (only part of the wateris re-injected into the formation via absorption wells while the rest is dumped into rivers) arrangements are morefrequently used. In certain circumstances, the use of desalinated geothermal water may constitute an alternativeenabling local needs for fresh water to be met (e.g. drinking water).

The assessment of the feasibility of implementing the water desalination process on an industrial scale islargely dependent on the method and possibility of disposing of, or utilising, the concentrate. Due to environmentalconsiderations, injecting the concentrate back into the formation is the preferable solution. The energy efficiency and economic analysis conducted demonstrated that the cost effectiveness of implementing the desalinationprocess in a geothermal system on an industrial scale largely depends on the factors related to its operation,including without limitation the amount of geothermal water extracted, water salinity, the absorption parameters ofthe wells used to inject water back into the formation, the scale of problems related to the disposal of cooled water,local demand for drinking and household water, etc. The decrease in the pressure required to inject water into theformation as well as the reduction in the stream of the water injected are among the key cost-effectiveness factors.Ensuring favourable desalinated water sale terms (price/quantity) is also a very important consideration owing tothe electrical power required to conduct the desalination process

Go to article

Authors and Affiliations

Barbara Tomaszewska
ORCID: ORCID
Leszek Pająk
ORCID: ORCID
Download PDF Download RIS Download Bibtex

Abstract

Running a business entails various risks which can significantly impact the economic and production results achieved by a given enterprise. One way of hedging certain risks is to use appropriately designed derivatives. This article presents the newest group of these contracts, i.e. swaps, and focuses on how these contracts can be used by Polish mining companies from the hard coal mining sector selling a part of their output on the global market. This article briefly characterises and presents types of swaps as well as the Polish swap market, pioneered by Polski Bank Rozwoju S.A. with the first FX swap of 1992. Since then, other types of transactions have also been included in the offering of domestic banks (assets swaps, cross-currency interest rate swaps). Mining companies producing hard coal have not been active on the swap market yet because of their poor activity on derivative markets. This article proposes a swap as an derivative hedging the hard coal price for a mining company exporting a part of its production to the global market. In the presented example, a mining company, by concluding a forward and an appropriately structured commodity swap, was able to both protect it self from a fall in the price and use additional gains due to prices rising in the global market. Apart from commodity swaps, mining companies can use FX swaps, IRS and other swaps described in the literature and commonly applied in practice by various economic entities, depending on the type of risk that needs hedging. A significant advantage of this kind of contract is that there is no need to freeze funds in security deposits, nor are there fees of other kinds (premiums) like those payable for other derivatives (futures, options).

Go to article

Authors and Affiliations

Edyta Brzychczy
Download PDF Download RIS Download Bibtex

Abstract

The subject of this work was the investigation of zeolite as a sorbent of toxic gases. In Nizny Hrabovec in the Slovak republic, two layers of zeolite with the active component clinoptilolite can be found. The study presented here investigated the ability of this natural zeolite to reduce polycyclic aromatic hydrocarbons (PAH) and NO emissions from engine exhaust. Exhaust gases from combustion engines include toxic components such as carbon monoxide, nitrogen oxides and hydrocarbons. Polycyclic aromatic hydrocarbons (PAH) are a component of hydrocarbons causing harmful influence on life forms. The experiments focused on the potential reduction of these toxic gases based on the sorption and catalytic properties of natural zeolite. Also observed was the influence of chemical adjustment including incorporation of certain metal elements. Chemical analysis by mutually independent technologies served to observe the sorption of PAH with carcinogenic properties on the natural zeolite tested. The experiments showed that chemical modification improved the sorption and catalytic properties of natural zeolite. The PAH were analysed in an extract of the contaminated, thermally-activated natural zeolite and modified zeolite after washing with ammonium chloride, cobalt chloride and copper sulphate. The study also presents results of NO measurements obtained by testing the filter-sorptive automobile system.

Go to article

Authors and Affiliations

Jozef Mačala
Iveta Pandová
Taťána Gondová
Katarína Dubayová
Download PDF Download RIS Download Bibtex

Abstract

Speech is almost never delivered in ideal quiet conditions. On the contrary, the acoustic signal reaching a listener's ears is degraded by background noise and reverberations. The current study investigates the perception of the voicing contrast of initial stops in English by Polish non-native listeners. Previous research showed that Polish learners do not match native speakers of English in production and perception of English voiced and voiceless stops, which results from different phonetic implementations of voicing in the two languages. In the current study, two groups of Polish listeners recognised voicing of English initial stops in one-syllable words both in quiet and in six-talker babble. The results revealed different patterns of recognition for the two conditions. The place of articulation interacted significantly with voicing both in quiet and in noise, however results obtained suggest that performance in noise did not simply reflect the performance in quiet.

Go to article

Authors and Affiliations

Arkadiusz Rojczyk
Download PDF Download RIS Download Bibtex

Abstract

The present paper describes an investigation into the use of dictionaries and the results of a survey which was carried out among 202 Polish university students of German as a foreign language. The main aims are, on the one hand, to find out the level of dictionary awareness and dictionary culture and, on the other hand, to investigate if students know the monolingual learner’s dictionaries of German and are able to use them effectively.

Go to article

Authors and Affiliations

Monika Bielińska
Download PDF Download RIS Download Bibtex

Abstract

Descriptions have been the object of attention of many philosophers. The goal of this article is to inquire into the meaning of those descriptions which, due to the peculiar character of the objects of description, have been interpreted in different ways, and to investigate in which sense one is able to speak of the existence (or non-existence) of an object of description. The various sorts of descriptions are inquired; the ques-tion which entities exist and which do not is dealt with, and, in relation to this, how ‘meaning’ is to be understood.

Go to article

Authors and Affiliations

Jasper Doomen
Download PDF Download RIS Download Bibtex

Abstract

The focus of the paper is the historical comparison of E fist and P pięść from the perspective of diachronic phonology. The paper specifically addresses the issue of the phonological development of this pair of cognates. The main aim is to explain the relatedness and differentiations of the modern reflexes of the original Proto-Indo-European roots and to account for their different phonological developments in both languages with a view to understanding the connection between the contemporary cognates. These aims are realised by means of searching for sound changes that explain the discrepancy in the phonological shapes of modern cognates and collecting other pairs of cognates that demonstrate the effect of theses sound changes. As the result of the historical and comparative analysis, it is argued that some of the Proto-Germanic reconstructions are more likely than others and in conclusion the most probable development of the two cognates is outlined in the chronological order. It is remarkable that the cognates of the compounds pięść / fist are to be found almost exclusively in Slavic and Germanic and the effect of their development resembles blending.

Go to article

Authors and Affiliations

Mikołaj Rychło
Download PDF Download RIS Download Bibtex

Abstract

The aim of the present study, set in the Polish-English context, is to discuss to what extent, if any, L1 competence (semantic, phraseological and grammatical) is influenced by the language contact, understood here as the (advanced) knowledge of L2, i.e. English. The research is based on the questionnaire consisting of 23 short excerpts taken from newspaper articles or texts published on the Internet, adapted by the author of the article. The texts in the questionnaire contain various kinds of borrowings and calques from English, such as semantic loans, loan translations (new phrases, collocations or idiomatic expressions) and grammatical constructions modelled on English. The questionnaire was given to two groups of informants: the main group (i.e. the bilingual one), consisting of 4th year students of English at the University of Silesia enrolled in the teaching programme, and the control group, consisting of students of various fields (excluding English or Polish studies) who declared limited knowledge of English. The respondents from both groups were given the questionnaire and their task was to read the sentences carefully and then to decide whether some words or phrases seemed incorrect or unnatural in a given context. The study has corroborated the view that language contact has some repercussions at the individual level: the knowledge of L2 may and does influence L1 competence. Not all the areas (semantic, phraseological and grammatical), however, are affected to an equal extent.

Go to article

Authors and Affiliations

Marcin Zabawa
Download PDF Download RIS Download Bibtex

Abstract

The article aims to discuss foreign language writing anxiety and present the results of the study which was to investigate whether writing apprehension can be observed among advanced adult learners of English. Analysing anxiety from a three dimensional perspective proposed by Lang (1971) the study revealed that advanced adult students most intensely experience cognitive anxiety whose most prevailing symptoms are panic, worry and elements of test anxiety. Somatic anxiety has also been observed in this group of participants with heart pounding, freezing up, mind going blank and jumbled thoughts as the most common symptoms. Finally, the research revealed that avoidance behaviour appears infrequently among advanced writers. The research results have been used as the basis for formulating pedagogical implications on how to reduce students’ writing apprehension.

Go to article

Authors and Affiliations

Małgorzata Marzec-Stawiarska
Download PDF Download RIS Download Bibtex

Abstract

The present contribution is concerned with the expression of emotions in a foreign language. It seeks to investigate what factors among gender, educational level, exposure to a foreign language and culture, L2 use, length of stay in a foreign country, or self-perceived L2 proficiency might influence the choice of a foreign language for emotional expression. The statistical analysis of 102 Polish-English bilinguals and Polish L2 users of English responses to an online questionnaire measuring expression of emotions in a foreign language reviled that the L2 use, self-perceived L2 proficiency and frequent contact with the L2 were linked to the expression of emotions in a foreign language. The results of this study show the complexity of the relationship between language, culture and emotions, suggesting that the exposure to a foreign language and its culture might be the key factor facilitating the choice of a non-native language while talking about emotions.

Go to article

Authors and Affiliations

Katarzyna Ożańska-Ponikwia
Download PDF Download RIS Download Bibtex

Abstract

The paper constitutes an attempt to define the role of soft skills in the process of FL learning. The data derive from the questionnaire distributed among the English philology students, and reveal the subjects’ attitudes to the qualities under investigation, as well as their strengths and weaknesses within the competences given. Having identified the students’ needs, the author of the project suggests ways of developing and promoting soft skills when shaping FL competence.

Go to article

Authors and Affiliations

Marzena S. Wysocka

This page uses 'cookies'. Learn more