The problem of governments’ over-indebtedness is one of the most important challenges for today’s EMU governance. As numbers suggest, the problem of extensive deficits has appeared in the EMU long before the burst of the global financial crisis. We suspect that the membership in a currency area might be partially blamed for such progression of indebtedness. This paper examines the determinants of government risk premiums in the EU Member States to answer if the risk premium assigned by the market may give currency area Member States additional incentives for profligacy. Controlling other factors, we investigate the pattern in which fiscal deficits and GDP growth affect the yield of 10-year-maturity government bonds in the euro area and the non-euro area EU Member States. Our results are straightforward. The market penalizes EU countries that do not belong to the euro area for bad economic performance and extensive deficits from 4 to 7 times stronger. Our estimates confirm the strong impact of the common credibility problem in the EMU but also support the key role of financial stress in determining the cost of government debt.
This paper presents research results of composite tubes filled with self-compacting concrete. The impact of the selected materials and geometric factors on resistance to the vertical shear was evaluated in this study. The resistance of the tested members was compared with recommendations given in Eurocode PN-EN 1994-1-1. From the results obtained in the tests it can be deduced that more parameters should be taken into consideration when determining resistance to the vertical shear in the interface between steel and concrete than PN-EN 1994-1-1 recommends.
The recent financial crisis has seen huge swings in corporate bond spreads. It is analyzed what quality VAR-based forecasts would have had prior and during the crisis period. Given that forecasts of the mean of interest rates or financial market prices are subject to large uncertainty independent of the class of models used, major emphasis is put on the quality of measures of forecast uncertainty. The VAR considered is based on a model first suggested in the literature in 2005. In a rolling window analysis, both the model’s forecasts and joint prediction bands are calculated making use of recently proposed methods. Besides a traditional analysis of the forecast quality, the performance of the proposed prediction bands is assessed. It is shown that the actual coverage of joint prediction bands is superior to the coverage of naïve prediction bands constructed pointwise.
Different methods are used for production of bronze bearings. In terms of technical specifications, the success of each of these methods
depends on the bond’s strength and in terms of economic, the production method is important. In this study, the aim is to study the strength
and microstructure of steel-bronze thrust bearing bond that has been produced through the casting using pre-mold. In this study, in order to
bond, the raw metals are chemically washed with sulfuric acid solution for five minutes at first. Then, the molten bronze SAE660 is cast in
a structural steel S235JR pre-mold. The bond’s strength has been measured using the shear test three times; the measurement of bond’s
length has been done using field emission scanning electron microscope (FESEM). The results indicate that the strength of the bond is at
least 94.8 MPa and bond’s length is 0.45 micrometers. Therefore, this method was successful for trust bearing application.
The advancing degradation of the ecosystem and the occurring climate changes demand decisive action to be taken by citizens, aimed at levelling the results of the lack of balance between the natural environment and business operations. The growing importance of ecology is reflected on the international financial market in the form of green bonds. This article is devoted to green bonds which are a specific group of securities, namely ecological debt instruments. Despite the green debt being one of the most recent segments of the capital market, its very dynamic expansion can be observed year by year. The article is aimed at identifying the conditions for the development of the global environmental bonds market, specifically the factors stimulating and inhibiting the process. The article is a review in character and the following research methods were used in order to achieve the desired objective: analysis of subject literature and data analysis from the green bonds market, a case study, a descriptive and an inductive method.
The aim of the paper is to investigate the shear failure mechanisms in T-shape, single span and simply supported beams exclusively reinforced with longitudinal glass fiber reinforced polymer (GFRP) bars. Usually the critical shear crack in RC beams without stirrups develops through the theoretical compression strut reducing the shear strength following the shear failure. The main parameter affecting the crack pattern and the shear strength of the beams is the shear slenderness. However, the test results presented in the paper indicated the new arching effect due to the bond losing between the GFRP flexural reinforcement and concrete. This failure mode revealed unexpected critical crack pattern and failure mode. The research of concrete beams flexurally reinforced with GFRP bars without stirrups indicated two failure modes: typical shear-compression and a new one leading by the bond losing between the ordinary reinforcement and concrete.
In the article the author analyses the impact of the Financial Crisis, especially the Greek fiscal one, on the sCDS prices in Europe. The aim of the article is to assess the ability of the sCDS premia to price the risk of countries before and during the Greek crisis. The author analyses sCDS premia of maturity 10 years together with the so called bond-spreads, i.e. the spreadsbetween the countries’ bond indexes and the risk free rate of the region (in our case it was the yield of German bonds of corresponding maturity – 10 years).The idea was to check whether there occurred any discrepancies in the risk valuation via the two measures, as a consequence of the Greek crisis. The data is taken daily and covers the period of 2008‒2012. Based upon the results obtained in the research we conclude that the Greek crisis indeed influenced the relationships between the two measures of risk, however the degree of the influence was different in different countries. The relationships between the two measures of risk were totally broken only in the case of Greece, while in the other countries the relationships either were not distorted or had been broken already at the beginning of the financial crisis (2008/2009). The Greek problems were indeed reflected in volatilities of all analysed instruments; however triggering the credit event affected only Greek bonds dynamics.
The paper presents research program of bond between glass fiber reinforced polymer bars and concrete in reference to the steel bars. Bond between the reinforcement and concrete is a crucial parameter governing a behaviour of reinforced concrete members and transferring of the internal forces from concrete to the reinforcement. The use of FRP bars as an equivalent reinforcement to steel in concrete structures has increased in recent years. The FRP bars are very different from steel, mainly due to much lower elasticity modulus and their anisotropic structure. Good performance of FRP reinforced concrete requires sufficient interfacial bond between bars and concrete. However, there are no specific standards referring to the surface preparation of these bars, that leads to variable bond behaviour of the composite reinforcement to the concrete. The objective of the study was to investigate the influence of variable parameters on the bond behaviour to concrete. The experimental program consisted of eighteen beam bond specimens varying in: bar diameter (12 mm, 16 mm, 18 mm) and type of reinforcement (GFRP sand – coated and steel bars). Although the GFRP bars indicated good bond behaviour to concrete, the average bond strength was slightly lower than that of steel reinforcement of 16mm and 18 mm, while it was higher for the GFRP bars of 12 mm diameter.
Introduction: Dentin hypersensitivity is a painful clinical condition. The frequency of its occurrence varies from 8 to 57%, depending on tested group and different methods of investigations. Recommended desensitizing agents have different mechanism of action and effectiveness. We are still looking for solutions that will improve their effectiveness and simultaneously allow for wider use of e.g. as a base material, counteracting postoperative hypersensitivity, reducing marginal microleakage. The aim of the study was to assess the effect of a selected desensitizing agent occluding dentin tubules with calcium hydroxyapatite on marginal microleakage formation of a class V composite restorations subjected to thermocycles.
Materials and Methods: In study it was used 40 molars and premolars, which were alternately assigned into two groups. In both groups standardized cavities were prepared. In the study group (study group — SG) before application of bonding agent Teethmate Desensitizer (f. Kuraray, Noritake Dental Inc., Okayama, Japan) was used. In the control group (control group — CG) OptiBond All-in-one (f. Kerr, Bioggio, Switzerland) bonding agent was used and cavities were filled using composite material Gradia Direct (f. GC Europe N.V., Leuven, Belgium). After storage in saline, teeth were subjected to 600 thermo-cycles, passive dye penetration test was done, teeth were cut in the area of filling, according to its long axis. Under light microscope magnification value of microleakage was measured and marginal microleakage rate (M) was counted. The results of the tests were statistically analyzed using the package STATISTICA 12.0 (StatSoft, USA).
Results: The average value of M for the SG group was 0.46 (min 0.05, max 0.76, SD 0.226) and for CG was 0.22 (min 0, max 0.74, SD 0.235). The differences between M values were statistically significant (p = 0.0094).
Conclusion: A reduction in the number of retention sites for the bonding system, facilitates the formation of microleakage in the experimental conditions and reduces the degree of adhesion of the composite material to the hard tissues of the tooth.
A cold roll bonding process is applied to fabricate an AA6061/AA5052/AA6061/AA5052 multi-layer sheet. Two AA6061 and two AA5052 sheets with 2mm thickness are stacked alternately to each other, and reduced to a thickness of 2 mm by multi-pass cold rolling. The roll bonded multi-layer sheet is then hardened by natural aging (T4) and artificial aging (T6) treatments. The as roll-bonded sheet shows a typical deformation structure that the grains are elongated to the rolling direction. However, after T4 and T6 aging treatments, it has a recrystallization structure consisting of the coarse equiaxed grains in both AA5052 and AA6061 sheets. The as rolled material shows a lamella structure in which AA5052 and AA6061 sheets are stacked alternately to each other, having higher hardness in AA5052 than in AA6061. However, T4 and T6 aging treated materials show a different lamella structure in which the hardness of the AA6061 layers is higher than that of the AA5052 layers. The strengths of the T4 and T6 age-treated specimens are found to increase by 1.3 and 1.5 times respectively, compared to that of the starting material.