Geothermal waters are a source of clean energy. They should be used in a rational manner especially in energyand economic terms.
Key factors that determine the conditions in which geothermal waters are used, the amount of energy obtainedand the manner in which cooled water is utilised include water salinity. Elevated salinity levels and the presence oftoxic microelements may often lead to difficulties related to the utilisation of spent waters. Only a few Polishgeothermal facilities operate in a closed system, where the water is injected back into the formation after havingbeen used. Open (with water dumped into surface waterways or sewerage systems) or mixed (only part of the wateris re-injected into the formation via absorption wells while the rest is dumped into rivers) arrangements are morefrequently used. In certain circumstances, the use of desalinated geothermal water may constitute an alternativeenabling local needs for fresh water to be met (e.g. drinking water).
The assessment of the feasibility of implementing the water desalination process on an industrial scale islargely dependent on the method and possibility of disposing of, or utilising, the concentrate. Due to environmentalconsiderations, injecting the concentrate back into the formation is the preferable solution. The energy efficiency and economic analysis conducted demonstrated that the cost effectiveness of implementing the desalinationprocess in a geothermal system on an industrial scale largely depends on the factors related to its operation,including without limitation the amount of geothermal water extracted, water salinity, the absorption parameters ofthe wells used to inject water back into the formation, the scale of problems related to the disposal of cooled water,local demand for drinking and household water, etc. The decrease in the pressure required to inject water into theformation as well as the reduction in the stream of the water injected are among the key cost-effectiveness factors.Ensuring favourable desalinated water sale terms (price/quantity) is also a very important consideration owing tothe electrical power required to conduct the desalination process
Compared to other European countries, Poland has scarce drinking water resources and exhibits
significant variation in annual runoff. On the other hand, the geothermal water resources present in sedimentary/structural basins, mostly in the Polish Lowlands and the Podhale geothermal system, not only provide a
valuable source of renewable energy, which is utilized, although only to a limited extent, but can also be used
for many other purposes. The paper presents the results of studies related to the desalination of low dissolved
mineral content geothermal waters from the Bańska IG-1 well using a dual hybrid system based on ultrafiltration and reverse osmosis. The desalination of geothermal waters may be considered a possible solution leading
to the decentralization of drinking water supply. In many cases, using cooled waters for drinking purposes may
be considered an alternative method of disposing of them, in particular for open drain arrangements, i.e. where
cooled water is dumped into surface waters.
This paper presents the results of a fi eld study on using mineral materials (fine-grained sand and medium-grained gravel) to reduce the concentration of readily soluble salts in a roadside environment. The investigated soils were Rendzic Sceletic Leptosols from an urban area characterized by a shallow humus horizon with a high content of skeletal parts, as well as a lack of homogeneity of the material in the soil profile. All soil samples were taken from five plots located along the main streets in the city of Opole (Southern Poland). It was revealed that the use of fine-grained sand and medium-grained gravel improved the structure of the surface soil layer, and thus favoured the migration of Na+ and Cl- ions into the soil profile. In comparison to control surfaces readily soluble salts were reduced with gravel and sand application. Furthermore, the mineral materials introduced on the soil surface for salinity neutralization did not affect the quality of the tested roadside calcareous soils. The results indicate that the use of mineral materials reduces soil salinity caused by NaCl. They also show the need to find new methods of salt neutralization, especially of roadside soils in order to improve and protect the quality of the environment.
The article presents the results of studies on the efficacy of water desalination (i.e. Elimination of NaCl ions from the solution) using graphene-polyamide composite membranes. The membrane used for filtration consists of a monolayer of polycrystalline graphene on a porous polyamide carrier support (nylon 66). The degree of desalination for an aqueous NaCl solution percolated through the membrane was 18%. In the future this type of membrane may replace the currently used reverse osmosis membranes.
Abstract: Introduction and development of membrane techniques in the production of drinking water and purifi cation of wastewaters, in the last 40 years, was important stage in the field of water treatment effectiveness. Desalination of sea and brackish water by RO is an established way for drinking water production. Signifi cant improvements in design of RO, the application of alternative energy sources, modern pretreatment and new materials have caused the success of the process. NF is the method of water softening, because NF membranes can retain di- and multivalent ions, but to a limited extend monovalent. Drinking water containing viruses, bacteria and protozoa, as well as other microorganisms can be disinfected by means of UF. Viruses are retained by UF membranes, whereas bacteria and protozoa using both UF and MF membranes. For the removal of NOM it is possible to use direct NF or integrated systems combining UF or MF with coagulation, adsorption and oxidation. The use of NF, RO and ED, in the treatment of water containing micropollutants for drinking and industrial purposes, can provide more or less selective removal of the pollutants. The very important are disinfection byproducts, residue
of pharmaceuticals and endocrine disrupting compounds. For endocrine disrupting compounds, special attention is paid onto polycyclic aromatic hydrocarbons and surface-active substances, chlorinated pesticides, phthalates, alkylphenols, polychlorinated biphenyls, hormones, synthetic pharmaceuticals and other substances disposed to the environment. The application of MF and UF in the removal of inorganic and organic micropollutants is possible in integrated systems with: coagulation, adsorption, complexion with polymers or surfactants and biological reactions.
In the present work, the dried biomass of soil isolated fungus Eurotium cristatum was used for synthesizing silver na-noparticles (AgNPs). The synthesized AgNPs were spherical in shape with average diameter of 16.56 nm and displayed maximum absorbance at 418. Fourier transform infrared (FTIR) study indicated the presence and binding of proteins with myco-produced silver nanoparticles. The optimum conditions for AgNPs biosynthesis were found to be at temperature of 40°C, pH of 8.0, substrate concentration of 500 ppm and fungal biomass wt. of 0.8 g. The AgNPs showed antibacterial ac-tivity against Staphylococcus aureus, Listeria monocytogenes, Escherichia coli and Shigella flexneri. AgNPs was built-in thin film nanocomposite (TFNC) membrane and the impacts of nanomaterial composition on membrane properties and de-salination process were studied. The AgNPs produced membrane TFNC had better filtration performances than pure thin film composite membrane TFC. The TFNC membrane had enhanced water flux (32.0 vs. 16.5 dm3∙m–2∙h–1) and advanced NaCl rejection (91.7 vs. 89%) compared to the TFC membrane. A pot experiment was conducted to evaluate the effect of the irrigation with desalinated water on yield and productivity of essential oil of the sweet basil (Ocimum basilicum L.) and lavender (Lavandula multifida L.). The irrigation with desalinated water reduced significantly the soil reaction, soil electri-cal conductivity (EC), sodium adsorption ratio and exchangeable sodium percent in rhizospheric soil, it also enhanced the growth and oil yield of both plants compared with those irrigated with salt water.