This work summarizes efficiency measurement results of a full bridge, 3 phase inverter composed of state-of-the-art Si IGBT transistors and Si or SiC diodes. Different (symmetrical and discontinuous) space vector modulation strategies were chosen in order to examine their influence (together with modulation frequency) on inverter losses. Induction machine was used as load, different load points were examined. Results clearly show, that proper modulation strategy, minimizing the switching losses of semiconductor switches, can increase the overall output efficiency at about 1% in case of both silicon and hybrid constructions. The drawback of DPWM approach is connected with the decreased quality of inverter output current. Hybrid technology can also improve the output efficiency at about 1% when compared to traditional constructions, but only in case of elevated switching frequencies. At low frequencies (below 10 kHz) modern semiconductor offer comparable results at much lower device costs.

In the paper results of the operation and efficiency of a DC-DC resonant converter with a switched capacitor topology, equipped with GaN transistors and SiC diodes are presented. Investigated problems are related to the optimization of the DC- DC power electronic converter in order to achieve miniaturization, a simplified design and high efficiency. The proposed system operates at a high frequency with low switching losses. The proposed design helps to achieve uniform heating of the transistors and diodes, as demonstrated by the results of the thermal imaging measurements. The GaN transistors are integrated in one package with dedicated gate drivers and used to simplify the drivers circuitry and increase the power density factor of the proposed device. In the high-frequency design presented in the paper, the converter is implemented without electrolytic capacitors. The results included in the paper contain waveforms recorded in the power circuit at ZVS operation when switching on the transistors. It occurs when the system operates above the frequency of current oscillations in the resonant circuit of the switched capacitor. Efficiency characteristics and a voltage gain curve of the converter versus its output power are presented as well. Results of efficiency and quality of waveforms are important because they allow to characterize the tested system for the implementation using WBG devices. The use of integrated GaN modules to minimize elements in the physical system is also unique to this model and it allows for very short dead-time use, operation in ZVS mode at low reverse-conduction losses.