The problem of poor quality of traffic accident data assembled in national databases has been addressed in European project InDeV. Vulnerable road users (pedestrians, cyclists, motorcyclists and moped riders) are especially affected by underreporting of accidents and misreporting of injury severity. Analyses of data from the European CARE database shows differences between countries in accident number trends as well as in fatality and injury rates which are difficult to explain. A survey of InDeV project partners from 7 EU countries helped to identify differences in their countries in accident and injury definitions as well as in reporting and data checking procedures. Measures to improve the quality of accident data are proposed such as including pedestrian falls in accident statistics, precisely defining minimum injury and combining police accident records with hospital data.
In the paper methods for conducting Road Safety Inspections (SIs) in Italy and Poland are described and compared. The goal of the study is to improve the quality and efficiency of the safety inspections of road network by using low cost equipment (GPS, Tablet, Camera) and specific software. Particular attention was paid to the need for proper calibration of factors, causing traffic safety hazard associated with road infrastructure. The model developed according to the Italian procedures was adapted to comply with the checklists and evaluation criteria of the Polish guidelines. Overall, a good agreement between the two approaches was identified, however some modification was required to include new safety issues, characteristic for the Polish network for safety inspection of two lane rural roads. To test the applicability about 100 km of regional two lane roads in Poland were inspected with Polish and Italian procedures.
U-turn lanes eliminate left turns at intersections and allow the manoeuvre to be made via median crossovers beyond the intersection. However, there are many situations where road infrastructures are characterized by the reduced width of the median. It is clear that, in such situations, we must adopt design criteria that take into account limitations imposed by the width of the cross-section of the road. This is the reason why it is necessary to adopt design solutions which expect a complete reorganization of the road section affected by the insertion of U-turns. In this paper, we intend to propose original guidelines for U-turn lane design, suitable to guarantee both the necessity to offer a high level of functionality of the road sections to be implemented by U-turns, and the principles of safety in order to reduce unsafe conditions during inversion manoeuvres as much as possible.
In the paper, the simulation PROP5 program is used to predict the sound level in proximity of a road with defined surroundings. The simulation involves road geometry (number of lanes and their positions) and traffic structure (vehicle flow rates and their average speeds), with equivalent omnidirectional point sources representing vehicles. In Part I of the paper, the agreement between measurement and simulation results is tested to verify the accuracy degree of the applied models of a road, as a noise source and propagation throughout surrounding space. In Part II, using the pre-tested simulation program, the possibility of acoustic climate improvement has been analyzed.
n the paper, the simulation PROP5 program with the road model defined as a noise source and road surroundings model, is used to predict the efficiency of noise protecting means for the chosen building. The appropriate models of verified accuracy have been chosen by comparison of the simulation results with field measurements (Walerian et al., 2010). Here, using the pre-tested simulation program, the possibility of acoustic climate improvement has been analyzed in the ranges of practical variations of the input parameters. The road parameters: its geometry (number of lanes and their positions) and traffic structure over lanes (vehicle flow rates and their average speeds) have been taken under consideration as changeable parameters, that could be corrected to obtain acoustical climate improvement. Moreover, an acoustical screen designing has been considered. The screen efficiency has been evaluated under conditions defined by the input parameters of the road and its surroundings.
The author investigated traffic flow quality on a new 2+1 long road bypass with an exceptionally high share of heavy vehicles in order to assess rational limits of heavy vehicle shares in traffic flow, dependent on the length of the 2+1 road and the number of passing segments in each direction. This paper presents the results of traffic flow quality analyses through the use of empirical and simulation methods for a single 2+1 road segment with additional passing lanes, as well as for the study of the entire section of the bypass – 2+1 road. Variables include analysis of travel speed distribution, platoon traffic, and amount of passing maneuvers. Results show that large passing demands lead to very high speeds (over 100 km/h) on segments with additional passing lanes. The conclusions include remarks related to the use and operation of 2+1 cross-sections with high shares of heavy vehicles.
The paper presents the authors’ concept of an adaptive road lighting that is concurrent with vehicles moving on roads. The lighting system is based on luminaires with light emitting diodes. The authors describe the operation of the adaptive road lighting system and point out benefits and limitations of the solution. The theoretical considerations are supported by an analysis of the installed and working system that was implemented at Bożeny street in Poznan, Poland. The system was also evaluated by the residents living near the street.
The aggregate applied for the wearing course has a significant influence on skid resistance of road surfaces. However, it is difficult to evaluate the behaviour of road surface in use on the basis of the Polished Stone Value (PSV) determined for the aggregate according to the so called ‘British method’. The British method, which is currently used in many countries, does not allow to determine the influence of neither the grain size of the aggregate nor the type of the wearing course on skid resistance of road surface. The present paper suggests a method for evaluation of the British Pendulum Number (BPN) for road surfaces in laboratory conditions. The authors assumed the BPN for polished slabs, made from asphalt mixtures, as the criterion. The index was measured with the British Pendulum Tester. The simulation of the process was conducted on research stand (called slab polisher) built at Bialystok University of Technology (BUT). The results of laboratory tests indicate that surfaces from asphalt concrete (AC) have slightly higher values of BPN in comparison with the values determined for surfaces made from stone mastic asphalt (SMA).
A multi-laminate constitutive model for soft soils incorporating structural anisotropy is presented. Stress induced anisotropy of strength, which is present in multi-laminate type constitutive models, is augmented by directionally distributed overconsolidation. The model is presented in theelastic-plastic version in order to simulate strength anisotropy of soft clayey soils and destructuration effects. Performance of the model is shown for some element tests and for the numericalsimulation of a trial road embankment constructed on soft clays at Haarajoki, Finland. The numerical calculations are completed with the commercial finite element code capable to performcoupled static/consolidation analysis of soils. Problems related to the initiation of in situ stress state, conditions of preconsolidation, as well as difficulties linked to estimation of the model parametersare discussed. Despite simple assumptions concerning field conditions and non-viscous formulationof the constitutive model, the obtained final results are of a sufficient accuracy for geotechnical practice.
The research into the use of less costly modifications of road links and networks, and changes in the service of road surroundings aimed at ensuring an improvement of through traffic performance in suburban areas, and on roads passing through built-up areas as small localities, with application of simulation model, is presented in this paper. From among possible designs, the authors investigated and presented the effectiveness of two, i.e. implementation of an additional multifunctional median lane in the road cross-section, and construction of service roads with different locations of intersections (end or middle of the road section).
The analysis is focused on the impact of such changes on traffic performance and road safety. The authors analysed travel speed, delay and share of platoon traffic on a uniform sections of the road for different types of road surroundings service. The study presents the results of analyses of road network before and after modification, and the assessment of:
•impact of access points density and level of their use on road traffic
performance,
•impact of driving through road sections in built-up
area on building platoon traffic,
•impact of change in the
cross-section type on traffic performance.
Many of already existing roads cross wetland river valleys. Also the roads nowadays planned are cutting through valuable wetlands. It is necessary to evaluate the range of their impact on the natural environment. This paper focuses only on the analysis of the road crossing impact on the groundwater level. Two options of crossing the wetlands were analyzed, building the road on embankments and in the bridge. It was assumed that the valley is filled with organic material under laid by permeable sands. Calculation results showed that building a road in the valley affects groundwater level only to the slight extend. Water conditions in the valley may be affected only during the construction of the road. Calculation results were confirmed by field observations.
It should be stressed that the object of this paper is the evaluation of water conditions. Environment might be influenced by other factors.