Nauki Techniczne

Archives of Control Sciences

Zawartość

Archives of Control Sciences | 2023 | vol. 33 | No 2

Abstrakt

In this work, we present new results for a two-scroll 4-D hyperchaotic system with a unique saddle point equilibrium at the origin. The bifurcation and multi-stability analysis for the new hyperchaotic system are discussed in detail. As a control application, we develop a feedback control based on integral sliding mode control (ISMC) for the complete synchronization of a pair of two-scroll hyperchaotic systems developed in this work. Numerical simulations using Matlab are provided to illustrate the hyperchaotic phase portraits, bifurcation diagrams and synchronization results. Finally, as an electronic application, we simulate the new hyperchaotic system using Multisim for real-world implementations.
Przejdź do artykułu

Autorzy i Afiliacje

Sundarapandian Vaidyanathan
1
Irene M. Moroz
2
ORCID: ORCID
Aceng Sambas
3 4
ORCID: ORCID

  1. Centre for Control Systems, Vel Tech University, 400 Feet Outer Ring Road, Avadi, Chennai-600092, Tamil Nadu, India
  2. Mathematical Institute, University of Oxford, Andrew Wiles Building, ROQ, Oxford Ox2 6GG, UK
  3. Faculty of Informatics and Computing, Universiti Sultan Zainal Abidin, Gong Badak, 21300, Terengganu, Malaysia
  4. Department of Mechanical Engineering, Universitas MuhammadiyahTasikmalaya, Tasikmalaya 46196,West Java, Indonesia

Abstrakt

The paper is dedicated to the robustness analysis of scalar multi-agent dynamical systems. The open problem we aim to address is the one related to the impact of additive disturbances. Set-theoretic methods are used to achieve the main results in terms of positive invariance and admissible bounds on the disturbances.
Przejdź do artykułu

Autorzy i Afiliacje

Katarzyna Topolewicz
1
Sorin Olaru
2
Ewa Girejko
1
ORCID: ORCID
Carlos E.T. Dórea
3

  1. Faculty of Computer Science, Bialystok University of Technology, Poland
  2. Laboratory of Signals and Systems Centrale-Supelec, University Paris-Saclay, France
  3. Department of Computer Engineering and Automation, Universidade Federal do Rio Grande do Norte, UFRN-CT-DCA, 59078-900 Natal, RN, Brazil

Abstrakt

The studied problem in this paper, treat the issue of state and fault estimation using a fuzzy observer in the case of unmeasurable decision variable for Discrete-Time Takagi-Sugeno Singular Sytems (DTSSS). First, an augmented system is introduced to gather state and fault into a single vector, then on the basis of Singular Value Decomposition (SVD) approach, this observer is designed in explicit form to estimate both of state and fault of a nonlinear singular system. The exponential stability of this observer is studied using Lyapunov theory and the convergence conditions are solved with Linear Matrix Inequalities (LMIs). Finally a numerical example is simulated, and results are given to validate the offered approach.
Przejdź do artykułu

Autorzy i Afiliacje

Khaoula Aitdaraou
1 2
Mohamed Essabre
3
Abdellatif El Assoudi
1 2
El Hassane El Yaagoubi
1 2

  1. Laboratory of High Energy Physics and Condensed Matter, Faculty of Science, Hassan II University of Casablanca, B.P 5366, Maarif Casablanca, Morocco
  2. ECPI, Department of Electrical Engineering, ENSEM Hassan II University of Casablanca, B.P 8118, Oasis Casablanca, Morocco
  3. Laboratory of Materials, Energy and Control Systems, Faculty of Sciences and Technologies Mohammedia, Hassan II University of Casablanca, Morocco

Abstrakt

In this paper an application of the Serret–Frenet parametrization of a curve to the path following task is presented. This curvilinear parametrization method is used to obtain a control object description relative to the desired curve defined in the three-dimensional space. In order to derive proper equations, the innovative approach of the non-orthogonal projection of a control object on the given path is investigated. The non-orthogonal projection allows to design a global control algorithm. The proposed solution results in a cascade structure of the control system. Thus, the backstepping integrator algorithm was applied to create a control law. Due to the partial knowledge of control object dynamic parameters, an adaptive algorithm is taken into account. Theoretical considerations are confirmed with simulation study. Conducted simulations illustrated following paths at different levels of complexity by a holonomic non-redundant manipulator with a fixed base.
Przejdź do artykułu

Autorzy i Afiliacje

Alicja Mazur
1
Filip Dyba
1

  1. Department of Cybernetics and Robotics, Faculty of Electronics, Photonics and Microsystems, Wrocław University of Science and Technology, Janiszewskiego Street 11/17, Wrocław 50-372, Poland

Abstrakt

This article validates the application of RT-Lab for the AGC studies of three-area systems. All the areas are employed with thermal-DSTS systems. A new controller named cascade FOPDN-FOPPIDN is employed. Its parameters are optimized using a CSA, subjecting to a new PI named HPA-ISE. The responses of the FOPDN-FOPIDN controller are related and are superior over PIDN and TIDN controllers. Moreover, the dominance of HPA-ISE is verified with ISE, and it performs better in terms of system dynamics. Further, the system performance reliability is analyzed with the AC-HVDC and is better than the AC system. Besides, sensitivity analysis recommends that the proposed FOPDN-FOPIDN at diverse conditions is robust and more reliability.
Przejdź do artykułu

Autorzy i Afiliacje

Naladi Ram Babu
1
Tirumalasetty Chiranjeevi
2
Ramesh Devarapalli
3
ORCID: ORCID
Łukasz Knypiński
4
ORCID: ORCID
Fausto Pedro Garcìa Màrquez
5

  1. Department of Electrical and Electronics Engineering, Aditya Engineering College, Surampalem, Andhra Pradesh, India
  2. Department of Electrical Engineering, Rajkiya Engineering College Sonbhadra, U.P., India
  3. Department of Electrical/Electronics and Instrumentation Engineering, Institute of Chemical Technology, Indianoil Odisha Campus, Bhubaneswar751013, India
  4. Faculty of Control, Robotics and Electrical Engineering, Poznan University of Technology, Piotrowo 3A, 60-965 Poznan, Poland
  5. Ingenium Research Group, University of Castilla-La Mancha, Spain

Abstrakt

The paper uses specific parameter estimation methods to identify the coefficients of continuous-time models represented by linear and non-linear ordinary differential equations. The necessary approximation of such systems in discrete time in the form of utility models is achieved by the use of properly tuned ‘integrating filters’ of the FIR type. The resulting discrete-time descriptions retain the original continuous parameterization and can be identified, for example, by the classical least squares procedure. Since in the presence of correlated noise, the estimated parameter values are burdened with an unavoidable systematic error (manifested by asymptotic bias of the estimates), in order to significantly improve the identification consistency, the method of instrumental variables is used here. In our research we use an estimation algorithm based on the least absolute values (LA) criterion of the least sum of absolute values, which is optimal in identifying linear and non-linear systems in the case of sporadic measurement errors. In the paper, we propose a procedure for determining the instrumental variable for a continuous model with non-linearity (related to the Wienerian system) in order to remove the evaluation bias, and a recursive sub-optimal version of the LA estmator. This algorithm is given in a simple (LA) version and in an instrumental variable version (IV-LA), which is robust to outliers, removes evaluation bias, and is suited to the task of identifying processes with non-linear dynamics (semi-Wienerian/NLID). In conclusion, the effectiveness of the proposed algorithmic solutions has been demonstrated by numerical simulations of the mechanical system, which is an essential part of the suspension system of a wheeled vehicle.
Przejdź do artykułu

Autorzy i Afiliacje

Janusz Kozłowski
1
ORCID: ORCID
Zdzisław Kowalczuk
1
ORCID: ORCID

  1. Gdansk University of Technology, WETI, Narutowicza 11/12, 80-952 Gdańsk

Abstrakt

In this note, a formula for the lower Bohl exponent of a discrete system with variable coefficients and weak variation was proved. This formula expresses the Bohl exponent through the eigenvalues of the coefficient matrix. Based on these formulas a necessary and sufficient condition for an uniform exponential instability of such systems is also presented.
Przejdź do artykułu

Autorzy i Afiliacje

Adam Czornik
1
Krzysztof Simek
1

  1. Silesian University of Technology, Faculty of Automatic Control, Electronics and Computer Science, Akademicka Street 16, 44-101 Gliwice, Poland

Abstrakt

The fractional order proportional, integral, derivative and acceleration (PI λD µA) controller is an extension of the classical PIDA controller with real rather than integer integration action order λ and differentiation action order µ. Because the orders λ and µ are real numbers, they will provide more flexibility in the feedback control design for a large range of control systems. The Bode’s ideal transfer function is largely adopted function in fractional control systems because of its iso-damping property which is an essential robustness factor. In this paper an analytical design technique of a fractional order PI λD µA controller is presented to achieve a desired closed loop system whose transfer function is the Bode’s ideal function. In this design method, the values of the six parameters of the fractional order PI λD µA controllers are calculated using only the measured step response of the process to be controlled. Some simulation examples for different third order motor models are presented to illustrate the benefits, the effectiveness and the usefulness of the proposed fractional order PI λD µA controller tuning technique. The simulation results of the closed loop system obtained by the fractional order PI λD µA controller are compared to those obtained by the classical PIDA controller with different design methods found in the literature. The simulation results also show a significant improvement in the closed loop system performances and robustness using the proposed fractional order PI λD µA controller design.
Przejdź do artykułu

Autorzy i Afiliacje

Khalfa Bettou
Abdelfatah Charef

Instrukcja dla autorów

Each paper submitted is subject to a review procedure, and the publication decision is based on reviers' comments on the paper. To avoid delay, please prepare the manuscript carefully following the suggestions listed below.

Computer file of the manuscript may be sent by e-mail to the address of Assistant Editor or acs@polsl.pl. Preferred text processors is TeX or LaTeX, however Word and other processors are also acceptable. In case of difficulties in processing the text, the author may be asked to supply the ASCII export of the original file.

Manuscripts sent via ordinary post should be typewritten double-spaced on one side of a standard size (A4) paper. Left side margin should be approximately 3cm (1.2'') wide. Each page should contain approximately 30 lines of 60 characters each. The manuscript including figures and tables together with their captions should be submitted. A separate signed letter giving the Author's preferred address for correspondence and return of proofs should be enclosed. Manuscript is the basis for editorial work.

First page should include the title of the paper, first name(s) and surname(s) of the Author(s), and a short summary (abstract), not longer than 20 lines.

Keywords of max. 5 - 7 items should be included in manuscript.

Numeration. All chapters, including the introduction, should be numbered in arabic numerals. Equations, tables and figures as well as theorems, corollaries, examples etc., should be numbered consecutively throughout the paper in arabic numerals, except in appendices. Appendices should be numbered with capital letters, and numeration should be closed within individual appendices.

If the manuscript is not prepared with TeX, mathematical expressions should be carefully written so as not to arouse confusion. Care should be taken that subscripts and superscripts are easily readable.

Tables and figures should be placed as desired by the Author within the text or on separate sheets with their suggested location indicated by the number of table or figure in the text. Figures, graphs and pictures (referred to as Fig. in the manuscript) should be numbered at the beginning of their caption following the figure. All figures should be prepared as PostScript EPS files or LaTeX picture files; in special cases, bitmaps of figure are also acceptable. The numbers and titles of tables should be placed above the main body of each table.

References should be listed alphabetically at the end of the manuscript. They should be numbered in ascending order and the numbers should be inserted in square brackets. References should be organized as follows. First initial(s), surname(s) of the author(s) and title of article or book. Then, for papers: title of periodical or collective work, volume number (year of issue), issue number, and numbers of the first and the last page; for books: publisher's name(s), place and year of issue. Example:

  1. R. E. Kalman: Mathematical description of linear dynamical system. SIAM J. Control. 1(2), (1963), 152-192.
  2. F. C. Shweppe: Uncertain dynamic systems. Prentice-Hall, Englewood Cliffs, N.J. 1970.


Please, give full titles of journals; only common words like Journal, Proceedings, Conference, etc. may be abbreviated ( to J., Proc., Conf., ... respectively). References to publications in the body of the manuscript should be indicated by the numbers of the adequate references in square brackets. When the paper is set in TeX the preferable form of preparing references is Bib TeX bib database.

Footnotes should be placed in the manuscript, beginning with "Received..." (date to be filled in by Editor), the author's institutional affiliation and acknowledgement of financial support,

Ta strona wykorzystuje pliki 'cookies'. Więcej informacji