Bibliography
[1] Shao, H.Q. & Li, Q. J. (2020). Effect of stirring casting process parameters on properties of aluminum matrix composites for mechanical shield. Hot Working Technology. 23, 67-69+75. [2] Krishna, A.R., Arun, A., Unnikrishnan, D. & Shankar. K.V. (2018). An investigation on the mechanical and tribological properties of alloy A356 on the addition of WC. Materials Today: Proceedings. 5(5), 12349-12355. DOI: 10.1016/j.matpr.2018.02.213. [3] Joseph, J., Pillai, B.S., Jayanandan, J., Jayagopan, J., Nivedh, S., Balaji, U.S.S. & Shankar, K.V. (2021). Mechanical behaviour of age hardened A356/TiC metal matrix composite. Materials Today: Proceedings. 38, 2127-2132. DOI: 10.1016/j.matpr.2020.05.013. [4] Kumar, V.A., Kumar, V.V.V., Menon, G.S., Bimaldev, S., Sankar, M., Shankar, K.V. & Balachandran, M. (2020). Analyzing the effect of B4C/Al2O3 on the wear behavior of Al-6.6Si-0.4Mg alloy using response surface methodology. International Journal of Surface Engineering and Interdisciplinary Materials Science. 8(2). 66-79. DOI: 10.4018/ijseims.2020070105. [5] Anilkumar, V., Shankar, K.V., Balachandran, M., Joseph, J., Nived, S., Jayanandan, J., Jayagopan, J. & Surya Balaji, U.S. (2021). Impact of heat treatment analysis on the wear behaviour of Al-14.2Si-0.3Mg-TiC composite using response surface methodology. Tribology in industry. 43(3), 590-602. DOI: 10.24874/ti.988.10.20.04. [6] Zhao, S., Liu, Z., &.Zhang, X. B. (2006). Technical process and mechanical properties of carbon nanotubes reinforced aluminium matrix composites. Foundry Technology. 2, 135-138. [7] Nam, D.H., Cha, S.I., Lim, B.K,, Park, H.M., Han, D.S. & Hong, S.H. (2012). Synergistic strengthening by load transfer mechanism and grain refinement of CNT/Al–Cu composites. Carbon. 50(7), 2417-2423. DOI: 10.1016/j.carbon. 2012.01.058. [8] Sun, Y.G., Liu, P., Chen, X.H., Liu, X.K., Li, W., Ma, F.C. & He, D,H. (2012). Present situation of carbon nano-tube reinforced aluminum composite. Material & Heat Treatment. 41(24), 137-139+144. [9] Bakshi, S.R. & Agarwal, A. (2011). An analysis of the factors affecting strengthening in carbon nanotube reinforced aluminum composites. Carbon. 49(2), 533-544. DOI: 10.1016/j.carbon.2010.09.054. [10] Nai, M.H., Wei, J. & Gupta, M. (2014). Interface tailoring to enhance mechanical properties of carbon nanotube reinforced magnesium composites. Materials & Design. 60, 490-495. DOI: 10.1016/j.matdes.2014.04.011. [11] Fan, T.X., Liu, Y., Yang, K.M., Song, J. & Zhang, D. (2019). Research progress on the optimization of the interface structure of carbon/metal composites and the interface mechanism. Acta Metall Sinica. 55(1), 16-32. [12] Cao, L., Chen, B., Guo, B.S. & Li, J.S. (2021). A review of carbon nanotube dispersion methods in carbon nanotube reinforced aluminium matrix composites manufacturing process. Journal of Netshape Forming Engineering. 13(3), 9-24. DOI: 10.3969/j.issn.1674-6457.2021.03.002. [13] Chen, B., Li, S., Imai, H., Jia, L., Umeda, J., Takahashi, M. & Kondoh, K. (2015). Load transfer strengthening in carbon nanotubes reinforced metal matrix composites via in-situ tensile tests. Composites Science and Technology. 113, 1-8. DOI: 10.1016/j.compscitech.2015.03.009. [14] Pérez-Bustamante, R., Pérez-Bustamante, F., Estrada-Guel, I., Licea-Jiménez, L., Miki-Yoshida, M. & Martínez-Sánchez, R. (2013). Effect of milling time and CNT concentration on hardness of CNT/Al2024 composites produced by mechanical alloying. Materials Characterization. 75, 13-19. DOI: 10.1016/j.matchar.2012.09.005. [15] Shi, G. (2012). The study of coated carbon nanotube and reinforced magnesium matrix composites. Lanzhou University of Technolofy, Lanzhou, China. [16] Aravind Senan, V.R., Anandakrishnan, G., Rahul, S.R., Reghunath, N. & Shankar, K.V. (2020). An investigation on the impact of SiC/B4C on the mechanical properties of Al-6.6Si-0.4Mg alloy. Materials Today: Proceedings. 26, 649-653. DOI: 10.1016/j.matpr.2019.12.359. [17] Rohith, K.P., Sajay Rajan, E., Harilal, H., Jose, K. & Shankar, K.V. (2018).Study and comparison of A356-WC composite and A356 alloy for an off-road vehicle chassis. Materials Today: Proceedings. 5(11), 25649-25656. DOI: 10.1016/j.matpr.2018.11.006. [18] Jiang, L., Wen, H., Yang, H., Hu, T., Topping, T., Zhang, D., Lavernia, E.J. & Schoenung, J.M. (2015). Influence of length-scales on spatial distribution and interfacial characteristics of B4C in a nanostructured Al matrix. Acta Materialia. 89, 327-343. DOI: 10.1016/j.actamat.2015.01.062. [19] Aravind Senan, V.R., Akshay, M.C., & Shankar, K.V. (2019). Determination on the effect of Al2O3 / B4B on the mechanical behaviour of al-6.6si-0.5mg alloy cast in permanent mould. Materials Science Forum. 969, 398-403. DOI: 10.4028/www.scientific.net/MSF.969.398. [20] Truong. H.T.X., Lagoudas, D,C., Ochoa, O.O. & Lafdi, K. (2013). Fracture toughness of fiber metal laminates: Carbon nanotube modified Ti–polymer–matrix composite interface. Journal of Composite Materials. 48(22), 2697-2710. DOI: 10.1177/0021998313501923. [21] Trinh, P,V., Luan, N.V., Phuong, D.D., Minh. P. N., Weibel, A., Mesguich, D. & Laurent, C. (2018) Microstructure, microhardness and thermal expansion of CNT/Al composites prepared by flake powder metallurgy. Composites Part A: Applied Science and Manufacturing. 105, 126-137. DOI: 10.1016/j.compositesa.2017.11.022. [22] Laha, T., Chen, Y., Lahiri, D. & Agarwal, A. (2009). Tensile properties of carbon nanotube reinforced aluminum nanocomposite fabricated by plasma spray forming. Composites Part A: Applied Science and Manufacturing. 40(5), 589-594. DOI: 10.1016/j.compositesa.2009.02.007. [23] Bakshi, S.R., Singh, V., Seal, S. & Agarwal, A. (2009). Aluminum composite reinforced with multiwalled carbon nanotubes from plasma spraying of spray dried powders. Surface and Coatings Technology. 203(10-11), 1544-1554. DOI: 10.1016/j.surfcoat.2008.12.004. [24] Liu, Z.Y., Xiao, B.L., Wang, W.G. & Ma, Z.Y. (2013). Developing high-performance aluminum matrix composites with directionally aligned carbon nanotubes by combining friction stir processing and subsequent rolling. Carbon. 62, 35-42. DOI: 10.1016/j.carbon.2013.05.049. [25] Yang, X., Liu, E., Shi, C., He, C., Li, J., Zhao, N. & Kondoh, K. (2013). Fabrication of carbon nanotube reinforced Al composites with well-balanced strength and ductility. Journal of Alloys and Compounds. 563, 216-220. DOI: 10.1016/j.jallcom.2013.02.066. [26] Gao, M., Gao, P., Wang, Y., Lei, T. & Ouyang. C. (2020). Study on metallurgically prepared copper-coated carbon fibers reinforced aluminum matrix composites. Metals and Materials International. 12. DOI: 10.1007/s12540-020-00897-1. [27] Li, S., Su, Y., Zhu, X., Jin, H., Ouyang, Q. & Zhang, D. (2016). Enhanced mechanical behavior and fabrication of silicon carbide particles covered by in-situ carbon nanotube reinforced 6061 aluminum matrix composites. Materials & Design. 107, 130-138. DOI: 10.1016/j.matdes.2016.06.021. [28] Mansoor, M., Khan, S., Ali, A. & Ghauri, K.M. (2019). Fabrication of aluminum-carbon nanotube nano-composite using aluminum-coated carbon nanotube precursor. Journal of Composite Materials. 53(28-30), 4055-4064. DOI: 10.1177/0021998319853341. [29] Kucukyildirim, B.O. & Eker, A.A. (2012). Fabrication and mechanical properties of CNT/6063Al composites prepared by vacuum assisted infiltration technique using CNT-Al preforms. Advanced Composites Letters. 133(1), 125-130. [30] Kang, K., Bae, G., Kim, B. & Lee, C. (2012). Thermally activated reactions of multi-walled carbon nanotubes reinforced aluminum matrix composite during the thermal spray consolidation. Materials Chemistry and Physics. 133(1), 495-499. DOI: 10.1016/j.matchemphys.2012.01.071. [31] Isaza, M.C.A., Ledezma Sillas, J.E., Meza, J.M. & Herrera Ramírez, J.M. (2016). Mechanical properties and interfacial phenomena in aluminum reinforced with carbon nanotubes manufactured by the sandwich technique. Journal of Composite Materials. 51(11), 1619-1629. DOI: 10.1177/0021998316658784. [32] Kurita, H., Estili, M., Kwon, H., Miyazaki, T., Zhou, W., Silvain, J-F. & Kawasaki, A. (2015). Load-bearing contribution of multi-walled carbon nanotubes on tensile response of aluminum. Composites Part A: Applied Science and Manufacturing. 68, 133-139. DOI: 10.1016/j.compositesa.2014.09.014. [33] Shin, S.E. & Bae, D.H. (2013). Strengthening behavior of chopped multi-walled carbon nanotube reinforced aluminum matrix composites. Materials Characterization. 83, 170-177. DOI: 10.1016/j.matchar.2013.05.018. [34] Zhou, W., Bang, S., Kurita, H., Miyazaki, T., Fan, Y. & Kawasaki, A. (2016). Interface and interfacial reactions in multi-walled carbon nanotube-reinforced aluminum matrix composites. Carbon. 96, 919-928. DOI: 10.1016/j.carbon.2015.10.016. [35] Liu, Z.Y., Xiao, B.L., Wang, W.G. & Ma, Z.Y. (2012). Singly dispersed carbon nanotube/aluminum composites fabricated by powder metallurgy combined with friction stir processing. Carbon. 50(5), 1843-1852. DOI: 10.1016/j.carbon.2011.12.034. [36] Li, Z.W., Lin, R.B., Hu, L., Yu, Z.Y., Yan, L.P., Tan, Z.Q., Fan, G.L., Li, Z.Q. & Zhang, D. (2017). CNTs/Al interfacial reaction degree and the relationship with mechanical performance of composite. Materials For Mechanical Engineering. 41(11), 19-22+28. DOI: 10.11973/jxgcc1201711003. [37] Zhang, X.X., Wei, H.M., Li, A.B., Fu, Y.D. & Geng, L. (2013). Effect of hot extrusion and heat treatment on CNTs–Al interfacial bond strength in hybrid aluminium composites. Composite Interfaces. 20(4), 231-239. DOI: 10.1080/15685543.2013.793093. [38] Wu, G. H., Jiang, L.T., Chen, G.Q. & Zhang, Q. (2012). Research progress on the control of interfacial reactions in metal matrix composites. Materials China. 31(7), 51-58. DOI: CNKI:SUN:XJKB.0.2012-07-009. [39] Chen, B., Shen, J., Ye, X., Imai, H., Umeda, J., Takahashi, M. & Kondoh, K. (2017). Solid-state interfacial reaction and load transfer efficiency in carbon nanotubes (CNTs)-reinforced aluminum matrix composites. Carbon. 114, 198-208. DOI: 10.1016/j.carbon.2016.12.013. [40] Ci, L., Ryu, Z., Jin-Phillipp, N.Y. & Rühle, M. (2006). Investigation of the interfacial reaction between multi-walled carbon nanotubes and aluminum. Acta Materialia. 54(20), 5367-5375. DOI: 10.1016/j.actamat.2006.06.031. [41] Jiang, L., Li, Z., Fan, G., Cao, L. & Zhang, D. (2012). Strong and ductile carbon nanotube/aluminum bulk nanolaminated composites with two-dimensional alignment of carbon nanotubes. Scripta Materialia. 66(6), 331-334. DOI: 10.1016/j.scriptamat.2011.11.023. [42] Xu, S.J., Xiao, B.L., Liu, Z.Y., Wang, W.G. & Ma, Z.Y. (2012). Micorstrures and mechanical properties of CNT/Al conposites fabricated by high energy ball-milling method. Acta Metallurgica Sinica. 48(7), 882-888. DOI: 10.3724/SP.J.1037.2012.00140. [43] Raviathul Basariya, M., Srivastava, V.C. & Mukhopadhyay, N.K. (2014). Microstructural characteristics and mechanical properties of carbon nanotube reinforced aluminum alloy composites produced by ball milling. Materials & Design. 64, 542-549. DOI: 10.1016/j.matdes.2014.08.019. [44] Yoo, S.J., Han, S.H. & Kim, W.J. (2013). Strength and strain hardening of aluminum matrix composites with randomly dispersed nanometer-length fragmented carbon nanotubes. Scripta Materialia. 68(9), 711-714. DOI: 10.1016/j.scriptamat.2013.01.013. [45] Le, G., Cai, X.L., Wang, K.J., Wang, X.F., Sun, H.P. & Chen, Y,G. (2013). Experimental study on interfacial reaction of CNTs/Al matrix composites. Mining And Metallurgical Engineering. 33(1), 109-112. DOI: 10.3969/j.issn.0253-6099.2013.01.027. [46] Majid, M., Majzoobi, G.H., Noozad, G.A., Reihani, A., Mortazavi, S.Z. & Gorji, M.S. (2012). Fabrication and mechanical properties of MWCNTs-reinforced aluminum composites by hot extrusion. Rare Metals. 31(4), 372-378. DOI: 10.1007/s12598-012-0523-6. [47] Zhu, X., Zhao, Y.G., Wu, M., Wang, H.Y. & Jiang, Q.C. (2016), Effect of initial aluminum alloy particle size on the damage of carbon nanotubes during ball milling. Materials (Basel). 9(3), 173. DOI: 10.3390/ma9030173. [48] Ji, W., Wang, W.J., Meng, F.D., Huang, J.J., Wu, Z.Q., He, W. & Wu, H. (2021), Study on interfacial bonding of aluminum matrix composites reinforced by carbon nanotubes with potassium fluoroaluminate. Hot Working Technology. 50(6), 71-74. DOI: 10.14158/j.cnki.1001-3814.20193526. [49] Esawi, A.M.K., Morsi, K., Sayed, A., Taher, M. & Lanka, S. (2010). Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium composites. Composites Science and Technology. 70(16), 2237-2241. DOI: 10.1016/j.compscitech.2010.05.004. [50] Peng, T. & Chang, I. (2014). Mechanical alloying of multi-walled carbon nanotubes reinforced aluminum composite powder. Powder Technology. 266, 7-15. DOI: 10.1016/j.powtec.2014.05.068. [51] Kwon, H., Saarna, M., Yoon, S., Weidenkaff, A. & Leparoux, M. (2014). Effect of milling time on dual-nanoparticulate-reinforced aluminum alloy matrix composite materials. Materials Science and Engineering: A. 590, 338-345. DOI: 10.1016/j.msea.2013.10.046. [52] Tang, J.J, Li, C.J. & Zhu, X.K. (2012). Progress of the current interface research on carbon nanotubes reinforced Aluminum-matrix composites. Materials Review. 26(11), 149-152. DOI: CNKI:SUN:CLDB.0.2012-11-033. [53] Li, J.R., Jiang, X.S., Liu, W.X., Li, X. & Zhu, D.G. (2015). Research progress of the interface characteristic and strengthening mechanism in carbon nanotube reinforced Aluminum matrix composites. Materials Review. 29(1), 31-35+42. DOI: 10.11896/j.issn.1005-023X.2015.01.005. [54] So, K.P., Lee, I.H., Duong, D.L., Kim, T.H., Lim, S.C., An, K.H. & Lee, Y.H. (2011). Improving the wettability of aluminum on carbon nanotubes. Acta Materialia. 59(9), 3313-3320. DOI: 10.1016/j.actamat.2011.01.061. [55] Zeng, M.Q. & Ou Yang, L. Z. (2002). Progress in research on interface of composite material. China Foundy Machinery & Technoligy. 6, 23-26. DOI: CNKI:SUN:ZZSB.0.2002-06-008. [56] Jiang, L., Fan, G., Li, Z., Kai, X., Zhang, D., Chen, Z., Humphries, S., Heness, G. & Yeung, W.Y. (2011). An approach to the uniform dispersion of a high volume fraction of carbon nanotubes in aluminum powder. Carbon. 49(6), 1965-1971. DOI: 10.1016/j.carbon.2011.01.021. [57] Huang, Y., Ouyang, Q., Zhang, D., Zhu, J., Li, R. & Yu, H. (2014). Carbon materials reinforced aluminum composites: a review. Acta Metallurgica Sinica (English Letters). 27(5), 775-786. DOI: 10.1007/s40195-014-0160-1. [58] So, K.P., Biswas, C., Lim, S.C., An, K.H. & Lee, Y.H. (2011). Electroplating formation of Al–C covalent bonds on multiwalled carbon nanotubes. Synthetic Metals. 161(3-4), 208-212. DOI: 10.1016/j.synthmet.2010.10.023. [59] Arai, S., Suzuki, Y., Nakagawa, J., Yamamoto, T. & Endo, M. (2012). Fabrication of metal coated carbon nanotubes by electroless deposition for improved wettability with molten aluminum. Surface and Coatings Technology. 212, 207-213. DOI: 10.1016/j.surfcoat.2012.09.051. [60] Jagannatham, M., Sankaran, S. & Haridoss, P. (2015). Microstructure and mechanical behavior of copper coated multiwall carbon nanotubes reinforced aluminum composites. Materials Science and Engineering: A. 638, 197-207. DOI: 10.1016/j.msea.2015.04.070. [61] So, K.P., Jeong, J.C., Park, J.G., Park, H.K., Choi, Y.H., Noh, D.H., Keum, D.H., Jeong, H.Y., Biswas, C., Hong, C.H. & Lee, Y,H. (2013). SiC formation on carbon nanotube surface for improving wettability with aluminum. Composites Science and Technology. 74, 6-13. DOI: 10.1016/j.compscitech.2012.09.014. [62] Wang, H. & Zhu, Y.L. (2019). Pretreatment and copper plating of carbon nanotubes by electroless deposition. Surface Technology. 48(11), 211-218. DOI: 10.16490/j.cnki.issn.1001-3660.2019.11.022. [63] Lahiri, D., Bakshi, S.R., Keshri, A.K., Liu, Y. & Agarwal. A. (2009). Dual strengthening mechanisms induced by carbon nanotubes in roll bonded aluminum composites. Materials Science and Engineering: A. 523(1-2), 263-270. DOI: 10.1016/j.msea.2009.06.006. [64] Liu, B., Deng, F.M. & Qu, J.X. (2003). Design and research of carbon nanotubes reinforced aluminum matrix composite. Ordnance Material Science and Engineering. 6, 54-57+69. DOI: 10.14024/j.cnki.1004-244x.2003.06.016. [65] Zheng, Q.W. & Fan, T.X. (2022). Experimental and simulation methods on liquid/solid interface wettability considering crystal surfaces. Materials Reports. 9, 1-23. [66] Han, X.D., Li, Z.Q., Fan, G.L., Jiang, L. & Zhang, D. (2012). Progress in fabrication technique of carbon nanotubes reinforced Al matrix composites. Materials Reports. 26(21), 40-46.DOI: CNKI:SUN:CLDB.0.2012-21-010. [67] Oh, S-I., Lim, J-Y., Kim, Y-C., Yoon, J., Kim, G-H., Lee, J., Sung, Y-M. & Han, J-H. (2012). Fabrication of carbon nanofiber reinforced aluminum alloy nanocomposites by a liquid process. Journal of Alloys and Compounds. 542, 111-117. DOI: 10.1016/j.jallcom.2012.07.029. [68] Bi, S., Xiao, B.L., Ji, Z.H., Liu, B.S., Liu, Z.Y. & Ma, Z.Y. (2020). Dispersion and damage of carbon nanotubes in carbon nanotube/7055Al composites during high-energy ball milling process. Acta Metallurgica Sinica (English Letters). 34(2), 196-204. DOI: 10.1007/s40195-020-01138-5. [69] Guo, B., Zhang, X., Cen, X., Wang, X., Song, M., Ni, S., Yi, J., Shen, T. & Du, Y. (2018). Ameliorated mechanical and thermal properties of SiC reinforced Al matrix composites through hybridizing carbon nanotubes. Materials Characterization. 136, 272-280. DOI: 10.1016/j.matchar.2017.12.032. [70] Aristizabal, K., Katzensteiner, A., Bachmaier, A., Mücklich, F. & Suarez, S. (2017). Study of the structural defects on carbon nanotubes in metal matrix composites processed by severe plastic deformation. Carbon. 125, 156-161. DOI: 10.1016/j.carbon.2017.09.075. [71] Li, H., Kang, J., He, C., Zhao, N., Liang, C. & Li, B. (2013). Mechanical properties and interfacial analysis of aluminum matrix composites reinforced by carbon nanotubes with diverse structures. Materials Science and Engineering: A. 577, 120-124. DOI: 10.1016/j.msea.2013.04.035. [72] Serp, P. & Castillejos, E. (2010). Catalysis in carbon nanotubes. ChemCatChem. 2(1), 41-47. DOI: 10.1002/cctc.200900283. [73] Liyong, T., Xiannian, S. & Ping, T. (2008). Effect of long multi-walled carbon nanotubes on delamination toughness of laminated composites. Journal of Composite Materials. 42(1), 5-23. DOI: 10.1177/0021998307086186. [74] Wang, L., Choi, H., Myoung, J-M. & Lee, W. (2009). Mechanical alloying of multi-walled carbon nanotubes and aluminium powders for the preparation of carbon/metal composites. Carbon. 47(15), 3427-3433. DOI: 10.1016/j.carbon.2009.08.007. [75] Esawi, A.M.K., Morsi, K., Sayed, A., Taher, M. & Lanka, S. (2011). The influence of carbon nanotube (CNT) morphology and diameter on the processing and properties of CNT-reinforced aluminium composites. Composites Part A: Applied Science and Manufacturing. 42(3), 234-243. DOI: 10.1016/j.compositesa.2010.11.008. [76] Hassan, M.T.Z., Esawi, A.M.K. & Metwalli, S. (2014). Effect of carbon nanotube damage on the mechanical properties of aluminium–carbon nanotube composites. Journal of Alloys and Compounds. 607, 215-222. DOI: 10.1016/j.jallcom.2014.03.174. [77] Jiang, J.L., Zhao, S.J., Yang, H. & Li, W. X. (2008). Mechanical properties of Al matrix composites reinforced with carbon nanotubes prepared by powdermetallurgy. Transactions Of Materials And Heat Treatment. 3, 6-9. DOI: 10.13289/j.issn.1009-6264.2008.03.002. [78] Liao, J-Z., Tan, M-J. & Sridhar, I. (2010). Spark plasma sintered multi-wall carbon nanotube reinforced aluminum matrix composites. Materials & Design. 31, S96-S100. DOI: 10.1016/j.matdes.2009.10.022. [79] Chen, B., Imai, H., Umeda, J., Takahashi, M. & Kondoh, K. (2017). Effect of spark-plasma-sintering conditions on tensile properties of aluminum matrix composites reinforced with multiwalled carbon nanotubes (MWCNTs). Jom. 69(4), 669-675. DOI: 10.1007/s11837-017-2263-4. [80] Choi, H.J., Shin, J.H. & Bae, D. H. (2011). Grain size effect on the strengthening behavior of aluminum-based composites containing multi-walled carbon nanotubes. Composites Science and Technology. 71(15), 1699-1705. DOI: 10.1016/j.compscitech.2011.07.013. [81] Etter, T., Schulz, P., Weber, M., Metz, J., Wimmler, M., Löffler, J.F. & Uggowitzer, P.J. (2007). Aluminium carbide formation in interpenetrating graphite/aluminium composites. Materials Science and Engineering: A. 448(1-2), 1-6. DOI: 10.1016/j.msea.2006.11.088. [82] Huang, Y.P., Li, D.H. & Huang, W. (2004), Preparation and property of pure AMC reinforced by CNTs. New technology and new process. 12, 48-49. DOI: CNKI:SUN:XJXG.0.2004-12-021. [83] Aborkin, A., Khorkov, K., Prusov, E., Ob'edkov, A., Kremlev, K., Perezhogin, I. & Alymov, M. (2019). Effect of increasing the strength of aluminum matrix nanocomposites reinforced with microadditions of multiwalled carbon nanotubes coated with TiC nanoparticles. Nanomaterials (Basel). 9(11), 1596. DOI: 10.3390/nano9111596. [84] Zhou, W., Sasaki, S. & Kawasaki, A. (2014). Effective control of nanodefects in multiwalled carbon nanotubes by acid treatment. Carbon. 78, 121-129. DOI: 10.1016/j.carbon.2014.06.055. [85] Wang, L., Ge, L., Rufford, T.E., Chen, J., Zhou, W., Zhu, Z. & Rudolph, V. (2011). A comparison study of catalytic oxidation and acid oxidation to prepare carbon nanotubes for filling with Ru nanoparticles. Carbon. 49(6), 2022-2032. DOI: 10.1016/j.carbon.2011.01.028. [86] Kim, K.T., Cha, S.I., Gemming, T., Eckert, J. & Hong, S.H. (2008). The role of interfacial oxygen atoms in the enhanced mechanical properties of carbon-nanotube-reinforced metal matrix nanocomposites. Small. 4(11), 1936-1940. DOI: 10.1002/smll.200701223. [87] Liao, J. & Tan, M-J. (2011). Mixing of carbon nanotubes (CNTs) and aluminum powder for powder metallurgy use. Powder Technology. 208(1), 42-48. DOI: 10.1016/j.powtec.2010.12.001. [88] Fan, B.B., Wang, B.B., Chen, H., Wang, G.J. & Zhang, Y. (2013). Preparation and properties of carbon CNTs/Al matrix composites. Journal Of Shenyang University (Natural Science). 25(2), 128-131. DOI: CNKI:SUN:SYDA.0.2013-02-011.
Go to article
en
pl
