Management and Production Engineering Review

Zawartość

Management and Production Engineering Review | 2022 | vol. 13 | No 2

1

Abstrakt

The main objective of the research work was to identify the dimensions of complexity and study the relationship between these defined dimensions in the industrial automation sector. To achieve these objectives in the study, there was assumed the following major hypothesis: With the increasing role of dynamic cross-section of the complexity there is growing importance of relationship dimension for competitive advantage. In the study there were diagnosed four dimensions of complexity. Existence of the relationship between these four identified dimensions of complexity occurred by the use of the Fisher’s exact test, which is a variant of the test of independence ��2. Furthermore, there were calculated V-Cramer factors to estimate the intensity of the above-mentioned relationship between analyzed dimensions. The research discovered that the three out of four dimensions such as the number of elements, variety of elements and uncertainty depend on the last dimension of complexity which is the relationship between elements. In the turbulent environment there is a growing importance of the relationship dimension. It forms competitive advantage and is a key condition of success in creating a new type of modern enterprise strategy that occurs within complexity management in the industrial automation sector.
Przejdź do artykułu

Autorzy i Afiliacje

Anna Lewandowska-Ciszek
1

  1. Poznan University of Economics and Business, Department of Logistics, Poland

Abstrakt

This study aims to identify the impact of transformational leadership in improving the performance of employees and its impact on raising the efficiency of organizations by considering that transformational leadership is one of the successful leadership methods to achieve the effectiveness and efficiency of organizations and improve their performance. In this paper, a systematic literature review of existing international papers is used. the meta-analysis method was used to analyze the articles published in scientific journals with high evaluation indexed in Scopus. Through the analysis process, application (WordStat 8) was used to investigate articles and summarize the descriptive statistics, correlation, and cloud keywords. The results reveal the effectiveness of transformational leadership on job performance. whenever managerial leaderships possess the attributes and characteristics of a transformational leader, including positive influence, inspirational motivation, and individual consideration, the more their subordinates will have creative skills and abilities. Also, the results indicate that the leader who possesses the characteristics of a transformational leader contributes significantly to the development of the capabilities of his subordinates, which is positively reflected in the upgrading of the organization's efficiency. In this paper, we present identifiable patterns in the relationship between transformational leadership, improving employee performance, and the raising efficiency of organizations. Then we suggest emerging core topics that deserve more academic attention. This paper's added value is that it undertakes a thorough and complete assessment of the relationship between transformational leadership, boosting employee performance, and increasing organizational efficiency. It also includes a written review of the work as well as an updated reference index covering the years 2011 to 2020, making it valuable for academics and professionals alike.
Przejdź do artykułu

Autorzy i Afiliacje

Askar Garad
1
Siswoyo Haryono
Rizal Yaya
2
Suryo Pratolo
2
Alni Rahmawati
2

  1. Doctoral Management Program, Postgraduate Studies, University Muhammadiyah Yogyakarta, Yogyakarta, Indonesia
  2. University Muhammadiyah Yogyakarta, Yogyakarta, Indonesia

Abstrakt

Distribution centres are the important elements of modern supply chains. A distribution centre stores and ships products. In this paper, we investigate the model of the dimensioning of shelf space on the rack with vertical and horizontal product categorisation in a distribution centre, where the objective is to maximise the total product movement/profit from all shelves of the rack which is being managed by a packer who needs to complete orders selecting the products from the shelves and picking them to the container. We apply two newly developed heuristics to this problem and compare the results to the optimal solution found by the CPLEX solver. There are 8 steering parameters that allow for reducing the search space implemented in heuristics. Among them are parameters that decrease the number of products on the shelves, the category with a range for assigning most space for the most profitable products within the category; two versions of steering parameters for the number of generated product allocations, the step parameters for the intensity of solution diversification, and the movement/profit below which the solutions are not generated. The computational results are presented and indicate that higher-quality solutions can be obtained using the new heuristics. In 10 from 15 tests, both heuristics can find optimal solutions without exploring the whole solution space. For the rest test sets, the solutions received by heuristics are not less than 92.58%.
Przejdź do artykułu

Autorzy i Afiliacje

Kateryna Czerniachowska
1
ORCID: ORCID
Radosław Wichniarek
2
ORCID: ORCID
Krzysztof Żywicki
2
ORCID: ORCID

  1. Wroclaw University of Economics and Business, Wroclaw, Poland
  2. Poznan University of Technology, Poznan, Poland

Abstrakt

The objective of this article is to carry out a systematic review of the literature on multivariate statistical process control (MSPC) charts used in industrial processes. The systematic review was based on articles published via Web of Science and Scopus in the last 10 years, from 2010 to 2020, with 51 articles on the theme identified. This article sought to identify in which industry the MSPC charts are most applied, the types of multivariate control charts used and probability distributions adopted, as well as pointing out the gaps and future directions of research. The most commonly represented industry was electronics, featuring in approximately 25% of the articles. The MSPC chart most frequently applied in the industrial sector was the traditional T2 of Harold Hotelling (Hotelling, 1947), found in 26.56% of the articles. Almost half of the combinations between the probabilistic distribution and the multivariate control graphs, i.e., 49.4%, considered that the data followed a normal distribution. Gaps and future directions for research on the topic are presented at the end.
Przejdź do artykułu

Autorzy i Afiliacje

Renan Mitsuo Ueda
1
Ìcaro Romolo Sousa Agostino
2
Adriano Mendonça Souza
1

  1. Federal University of Santa Maria, Brazil
  2. Federal University of Santa Catarina, Brazil

Abstrakt

We investigate the effect on firm performance of the motivation for applying maturity models in manufacturing and information technology organizations. We expect the association between profitability and maturity models to be less if motivated by external contract requirements (e.g., for certain government contracts), than if motivated internally to improve processes. Using a sample of firm-year observations for 1,105 SEC registrants in the manufacturing (Standard Industry Classification (SIC): 3600-3812) and IT industries (SIC: 7370-7374) for 2017 and 2018, and CMMI information from the CMMI institute published appraisal results system, it is observed that 28 public firms (17 IT firm-years and 23 manufacturing firm-years) in the sample had CMMI appraisals between 2017 and 2018. We use logistic regression to test if the likelihood of CMMI appraisal is positively associated with government sales. The results support for the manufacturing industry, but not for the IT industry, prior research’s assertion that maturity is a source for competitive advantage.
Przejdź do artykułu

Autorzy i Afiliacje

Louise Hayes
1
Jing Lu
1
Davar Rezania
1

  1. Department of Management, Gordon S. Lang School of Business and Economics, University of Guelph, Canada

Abstrakt

The green logistics item as a part of distribution processes represents an innovative perspective in many views. This perspective is current from an offer and demand point of view. Many authors examine only the businesses aspect, while labour market acceptance is important. The aim of this article is to create and verify a green distribution model and this examines the green distribution perception from the consumer’s point of view in a context of chosen demographic characteristics. The creation of a green distribution model is supported by secondary research at which consists of four parts – input, transport, production and sale. Model verification was taken with primary research which base was created of 409 respondents. In the study, we use many statistical and mathematical, as well as scientific and philosophical methods. Among the most significant belong Cronbach’s alpha and McDonald’s omega. We used to verify and estimate model reliability, correlation analysis for relation research, one-way ANOVA test for research hypotheses verification and cluster analysis for identification of possible hidden clusters. The model can be considered a reliable one. Results indicate a low influence of distribution ecological factor in a consumer’s perspective, as well, it can be stated, the age, contrary to sex, represents a significant factor in a green distribution perception. Results can be used in both the academic and commercial spheres in various fields and disciplines. The primary survey was conducted in Slovakia, but it would be appropriate to examine the model in other countries, as well as to identify factors that may affect the model of green distribution in the future.
Przejdź do artykułu

Autorzy i Afiliacje

Marián Cvirik
1
ORCID: ORCID
Naqibullah Daneshjo
1
ORCID: ORCID

  1. Department of Management, Gordon S. Lang School of Business and Economics, University of Guelph, Canada

Abstrakt

The EFQM recognition system is an acknowledged method of assessing business excellence understood as the degree of implementation of quality management in an organization. The paper aims to examine whether a high rating under the EFQM recognition system simultaneously means a high general management maturity level. The investigation covers the 35 organizations that won EFQM awards in Portugal. The study is based on points awarded to organizations under the EFQM recognition system and on questionnaires/interviews with managers responsible for quality management in the studied organizations. The results indicate a positive and robust correlation between the quality management implementation (rating under the EFQM recognition system) and general management maturity. The study helps to close the gap in the literature regarding the relationship between quality management and management maturity in an organization.
Przejdź do artykułu

Autorzy i Afiliacje

Luís Pimentel
1
ORCID: ORCID
Piotr Rogala
2
ORCID: ORCID

  1. BRU-UNIDE, ISCTE-IUL, University Institute of Lisbon; Universidade Europeia (Lisbon), Portugal
  2. Wroclaw University of Economics and Business, Department of Quality and Environmental Management, Poland

Abstrakt

Understanding of how to implement Lean successfully and how it contributes to performance in manufacturing organizational is still relatively lacking so that Lean exploration is still needed in the management aspect. This research will examine the effect of LMS, LWRT on LBR. This research was conducted on 30 companies in industrial centers in Indonesia, and the data were processed using the Structural Equation Model method. It was found that LMS has no significant effect on LBR, but LMS has a significant effect on LWRT, while LWRT has a significant effect on LBR. In detail, LBR variation of 78.8% is simultaneously influenced by LMS and LWRT, 21.2% is influenced by other variables. While 72.7% LWRT variation is influenced by LMS variation, and 27.3% is influenced by other variables. This result confirms Bergmiller’s research (2009) that LMS has a significant effect on LBR through LWRT for the manufacturing industry in Indonesia.
Przejdź do artykułu

Autorzy i Afiliacje

Herry Agung Prabowo
1
Farida Farida
1
Erry Yulian T. Adesta
2

  1. Industrial Engineering, Universitas Mercu Buana Jakarta, Indonesia
  2. Department of Industrial Safety and Health Engineering, Universitas Indo Global Mandiri (UIGM), Indonesia

Abstrakt

Employers signal difficulties in sourcing technically-educated staff. They often engage, though to a limited degree, in cooperation with vocational schools to mitigate this difficulty. One of the reasons for the limited involvement of enterprises in cooperation with schools is the difficulty in assessing the benefits that it may bring. The aim of the study in the article was to develop and initially verify a model for evaluating the results of supporting secondary technical schools by manufacturing enterprises. The article features a multiple case study using several types of interviews, a distributed questionnaire and an analysis of secondary sources. The study was conducted in cooperation with four large manufacturing enterprises. The result of the research is a more thorough understanding of the possibilities and limitations in evaluating the results of support for schools. This support should translate in enterprises into more effective and efficient management of the competences of the future.
Przejdź do artykułu

Autorzy i Afiliacje

Maciej Szafrański
1

  1. Faculty of Engineering Management, Poznan University of Technology, Poland

Abstrakt

This article presents the assessment of the creative culture and the level of innovativeness in selected manufacture enterprises. The theoretical part of the article discusses the space for creativity in the company and the microfoundations of the pyramid of needs related to creative culture. The pyramid consists of different microfoundations, which were used to create a questionnaire to assess the level of creative culture. This study assessed creative culture according to a model of the hierarchy of needs, developed by the author of this study based on Maslow’s pyramid of needs. The assessment used an innovation questionnaire and a creative culture questionnaire. This article presents a sample analysis of the results obtained from two of the companies that participated in the study. Furthermore, the article summarizes the results obtained from all participating companies and gives recommendations related to establishing creative culture based on these results. Every company should implement appropriate standards to help it develop a creative working environment. The goal of assessing creative culture in a company is to assist managers in building a workplace that fosters creativity, since such a workplace is a significant factor affecting the emergence of innovation. The analysis of the creative culture of the companies revealed their weaknesses and strengths in this respect. The developed methodology will undoubtedly influence an increase of awareness and knowledge of enterprises in the field of creating a pro-creative company culture. Such actions will contribute to the increase of company’s innovation, thus influencing its development.
Przejdź do artykułu

Autorzy i Afiliacje

Kamila Tomczak
1
ORCID: ORCID

  1. Opole University of Technology, Poland

Abstrakt

The activities of the organisation concentrate mainly on meeting customers’ requirements. For this purpose, various activities are being conducted for customer satisfaction surveys. In this context, it is important to predict the quality of the product and the changes in the cost of the purchase product. The purpose of this study is to propose a method for predicting the quality level of a product and change the cost of the product considering current customers’ requirements for a combination of product feature states and pro-quality changes. The method includes the calculation of the quality level of the product using the punctationformalised method, where the level depends on a combination of values of states (parameters) attributes of the product, that is, current and modified. The method was tested as an example of a household vacuum cleaner for which 20 attributes were determined. According to the Pareto rule (20/80), the four product attributes important for customers were selected. Thereafter, for important attributes, possible combinations of the values of these attributes were determined. In addition, an algorithm for determining the possible combinations of product attribute states in the MATLAB program was developed. Additionally, the change in the current cost of the product considering the change in the quality level was estimated. The product cost changes were determined based on the actual cost of the product and the current product quality level. The method allows the determination of all combinations of values of state attributes of the product, such that it is possible to take appropriate improvement actions both in terms of quality and cost. The results from the method allow the prediction of product satisfaction for customers and they are favourable in terms of production cost. Therefore, it is possible to design the product in advance and support the producer in preparatory activities.
Przejdź do artykułu

Autorzy i Afiliacje

Dominika Siwiec
1
ORCID: ORCID
Andrzej Pacana
1
ORCID: ORCID

  1. Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics, Poland

Instrukcja dla autorów

All manuscripts should be submitted at:

https://www.editorialsystem.com/mper/

They are first examined by the Management and Production Engineering Review Editors. Manuscripts clearly not suitable for publication, incomplete or not prepared in the required style will be sent back to the authors without scientific review, but may be resubmitted as soon as they have been corrected. The ultimate decision to accept, accept subject to correction, or reject a manuscript lies within the prerogative of the Editor-in-Chief and is not subject to appeal. The editors are not obligated to justify their decision.

All manuscripts submitted to MPER at https://www.editorialsystem.com/mper/ will be sent to at least two and in some cases three reviewers for passing the double-blind review process. The responsible editor will make the decision either to send the manuscript to another reviewer to resolve the difference of opinion or return it to the authors for revision.

The material formatted in the MPER format must be unpublished and not under submission elsewhere. Once a year a list of co-operating reviewers is publish in electronic version of MPER.

All articles published in MPER are published in open access. In order to provide free access to readers, and to cover the costs of copyediting, typesetting, long-term archiving, and journal management, an article processing charge (APC) of 800 PLN (about 180 Euro, VAT included) for 10-page article applies to papers accepted after peer review. Each additional page of the article (over 10 pages) costs 80 PLN (about 18 Euro, VAT included). Maximum length of the article is 18 pages (using MPER template). There is no submission charge.

The average time during which the preliminary assessment of manuscripts is conducted - 14 days

The average time during which the reviews of manuscripts are conducted - 6 months

The average time in which the article is published - 12 months

Dodatkowe informacje

The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on https://creativecommons.org/licenses/by/4.0/.

Zasady etyki publikacyjnej

The ethics statements for the journal Management and Production Engineering Review are based on the guidelines of Committee on publication ethics (COPE) and the ELSEVIER publishing ethics resource kit.
For Authors: All articles, published in the journal Management and Production Engineering Review have to comprise a list of references which correspond with the journal’s Instructions to authors for paper preparation. The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted. All articles are tested using antyplagiarism programme. An author should not in general publish manuscripts describing essentially the same research in more than one journal or primary publication. Submitting the same manuscript to more than one journal concurrently constitutes unethical publishing behaviour and is unacceptable. Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study. The corresponding author should ensure that all co-authors have seen and approved the final version of the paper and have agreed to its submission for publication. All authors should disclose in their manuscript any financial or other substantive conflict of interest that might be construed to influence the results or interpretation of their manuscript. All sources of financial support for the project should be disclosed.
Authors are accountable for the originality, validity and integrity of the content of their submissions. In choosing to use AI tools, authors are expected to do so responsibly and in accordance with our editorial policies on authorship and principles of publishing ethics. Authorship requires taking accountability for content, consenting to publication via an author publishing agreement, giving contractual assurances about the integrity of the work, among other principles. These are uniquely human responsibilities that cannot be undertaken by AI tools. Therefore, AI tools must not be listed as an author. Authors must, however, acknowledge all sources and contributors included in their work. Where AI tools are used, such use must be acknowledged and documented appropriately.
For Editor-in-Chief: The editor is responsible for decision which of the articles submitted to the journal should be published. The editor and editorial board and office must not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, potential reviewers, other editorial advisers, and the publisher, as appropriate. Unpublished materials disclosed in a submitted manuscript must not be used in an editor's own research without the express written consent of the author.
For Reviewers: Peer review helps the editor in making editorial decisions and also assist the author in improving the paper. Any selected referee who feels unqualified to review the research reported in a manuscript or knows that its prompt review will be impossible should notify the editor and excuse himself from the review process. Any manuscripts received for review must be treated as confidential documents. They must not be shown to or discussed with others except as authorized by the editor. Reviews should be conducted objectively. Personal criticism of the author is inappropriate. Reviewers should identify relevant published work that has not been cited by the authors. Any statement that an observation, derivation, or argument had been previously reported should be accompanied by the relevant citation. A reviewer should also call to the editor's attention any substantial similarity or overlap between the manuscript under consideration and any other published paper of which they have personal knowledge. Information obtained through peer review must be kept confidential and not used for personal advantage. Reviewers should not consider manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the papers. Other sources: http://apem-journal.org/


Procedura recenzowania

Received manuscripts are first examined by the Management and Production Engineering Review Editors. Manuscripts clearly not suitable for publication, incomplete or not prepared in the required style will be sent back to the authors without scientific review, but may be resubmitted as soon as they have been corrected. The corresponding author will be notified by e-mail when the manuscript is registered at the Editorial Office (marta.grabowska@put.poznan.pl; mper@put.poznan.pl). The ultimate decision to accept, accept subject to correction, or reject a manuscript lies within the prerogative of the Editor-in-Chief and is not subject to appeal. The editors are not obligated to justify their decision. All manuscripts submitted to MPER editorial office (https://www.editorialsystem.com/mper/) will be sent to at least two and in some cases three reviewers for passing the double-blind review process. The responsible editor will make the decision either to send the manuscript to another reviewer to resolve the difference of opinion or return it to the authors for revision.

The average time during which the preliminary assessment of manuscripts is conducted - 14 days
The average time during which the reviews of manuscripts are conducted - 6 months
The average time in which the article is published - 8.4 months

Recenzenci

Name Surname Affiliation Hind Ali University of Technology, Iraq Katarzyna Antosz Rzeszow University of Technology, Poland Bagus Arthaya Mechatronics Engineering Universitas Parahyangan, Indonesia Sarini Azizan Australian National University, Australia Zbigniew Banaszak Management and Computer Science, Koszalin University of Technology, Poland Lucia Bednarova Technical University of Kosice, Slovak Republic Kamila Borsekova UNIVERZITA MATEJA BELA V BANSKEJ BYSTRICI, Slovak Republic RACHID Boutarfa Hassan First University, Morocco Anna Burduk Wrocław University of Science and Technology, Poland Virginia Casey Universidad Nacional de Rosario, Argentina Claudiu Cicea Bucharest University of Economic Studies Romania, Romania Ömer Cora Karadeniz Technical University, Turkey Wiesław Danielak Uniwersytet Zielonogórski, Poland" Jacek Diakun Poznan University of Technology, Poland Ewa Dostatni Poznan University of Technology, Poland Marek Dźwiarek Milan Edl University of West Bohemia, Czech Republic Joanna Ejdys Bialystok University of Technology, Poland Abdellah El barkany Sidi Mohamed Ben Abdellah University Faculty of Science and Technology of Fez, Morocco Francesco Facchini Università degli Studi di Bari, Italy Mária Magdolna Farkasné Fekete Szent István University, Hungary Çetin Fatih Başkent Üniversitesi, Turkey Mose Gallo Materials and Industrial Production Engineering, University of Napoli Federico, Italy Mit Gandhi Gujarat Gas Limited, India Józef Gawlik Cracow University of Technology, Institut of Production Engineering, Poland Andrzej Gessner Politechnika Poznańska, Poland Pedro Glass Universitatea Valahia din Targoviste, Romania Arkadiusz Gola Lublin University of Technology, Faculty of Mechanical Engineering, Poland Alireza Goli Department of industrial engineering, Yazd university, Yazd, Iran Iran, Iran Magdalena Graczyk-Kucharska Politechnika Poznańska, Poland Damian Grajewski Poznan University of Technology, Poland Łukasz Grudzień Production Engineering Department, Poznan University of Technology, Poland Patrik Grznár University of Žilina, Slovak Republic" Anouar Hallioui INTI International University, Malaysia Ali HAMIDOGLU Adam Hamrol Mechanical Engineering, Poznan University of Technology, Poland ni luh putu hariastuti itats, Indonesia Christian Harito Bina Nusantara University, Indonesia Muatazz Hazza "Mechanical and Industrial Engineering Department; School of Engineering. American University of Ras Al Khaimah. United Arab Emirates, United Arab Emirates" Ali Jaboob Dhofar University, Oman Małgorzata Jasiulewicz-Kaczmarek Poznan University of Technology, Poland Oláh Judit University of Debrecen, Hungary Jan Klimek Szkoła Główna Handlowa, Poland Nataliia Klymenko National University of Life and Environmental Sciences of Ukraine, Ukraine Peter Kostal Slovenská Technická Univerzita V Bratislave, Slovak Republic Martin Krajčovič University of Žilina, Slovak Republic Robert Kucęba Wydział Zarządzania, Politechnika Częstochowska, Poland Agnieszka Kujawińska Poznan University of Technology Edyta Kulej-Dudek Politechnika Częstochowska, Poland Sławomir Kłos Institute of Mechanical Engineering, University of Zielona Góra, Poland Christian Landschützer Graz University of Technology, Austria Anna Lewandowska-Ciszek Department of Logistics, Poznań University of Economics and Business, Poland Damjan Maletič University of Maribor, Faculty of Organizational Sciences, Slovenia Marcela Malindzakova Technical University, Slovak Republic Józef Matuszek Janusz MLECZKO Rami Mokao MIS - Management Information Systems, HIAST, Syria Maria Elena Nenni University of Naples, Italy Nor Hasrul Akhmal Ngadiman School of Mechanical Engineering, Universiti Teknologi Malaysia, Malaysia Dinh Son Nguyen The University of Danang, University of Science and Technology, Viet Nam Duc Duy Nguyen Department of Industrial Systems Engineering,
Ho Chi Minh Technology University (HCMUT), Viet Nam Filscha Nurprihatin Sampoerna University, Indonesia Filip Osiński Poznan University of Technology Ivan Pavlenko Department of General Mechanics and Machine Dynamics, Sumy State University, Ukraine Robert Perkin BorgWarner, United States Alin Pop University of Oradea, Romania Ravipudi Venkata Rao "Department of Mechanical Engineering S. V. National Institute of Technology, Surat, India" Marta Rinaldi University of Campania, Italy Michał Rogalewicz Division of Production Engineering, Institute of Materials Technology, Faculty of Mechanical Engineering, Poznan University of Technology, Poland David Romero Tecnológico de Monterrey, Mexico ELMADANI SAAD Hassan First university of Settat, Morocco Krzysztof Santarek Faculty of Mechanical and Industrial Engineering, Warsaw University of Technology, Poland shankar sehgal Panjab University Chandigarh, India Robert Sika Faculty of Mechanical Engineering and Management, Institute of Materials Technology, Poland Chansiri Singhtaun Department of Industrial Engineering, Faculty of Engineering, Kasetsart University, Thailand Bożena Skołud Silesian University of Technology, Poland Lucjan Sobiesław Jagiellonian University, Poland Fabiana TORNESE University of Salento, Italy Stefan Trzcielinski Poznan University of Technology, Poland Amit Kumar Tyagi Centre for Advanced Data Science, India Cang Vo Binh Duong University, Viet Nam Jaroslav Vrchota University of South Bohemia České Budějovice, Faculty of Economics, Department of Management, Studentská, 370 05 České Budějovice, Czech Republic Radosław Wichniarek Poznan University of Technology, Poland Ewa Więcek-Janka Wydział Inżynierii Zarządzania, Politechnika Poznańska, Poland Josef Zajac Uniwersytet Techniczny w Koszycach, Slovak Republic Aurora Zen Universidade Federal do Rio Grande do Sul, Brazil

Ta strona wykorzystuje pliki 'cookies'. Więcej informacji