Management and Production Engineering Review

All manuscripts should be submitted at:

https://www.editorialsystem.com/mper/

They are first examined by the Management and Production Engineering Review Editors. Manuscripts clearly not suitable for publication, incomplete or not prepared in the required style will be sent back to the authors without scientific review, but may be resubmitted as soon as they have been corrected. The ultimate decision to accept, accept subject to correction, or reject a manuscript lies within the prerogative of the Editor-in-Chief and is not subject to appeal. The editors are not obligated to justify their decision.

All manuscripts submitted to MPER at https://www.editorialsystem.com/mper/ will be sent to at least two and in some cases three reviewers for passing the double-blind review process. The responsible editor will make the decision either to send the manuscript to another reviewer to resolve the difference of opinion or return it to the authors for revision.

The material formatted in the MPER format must be unpublished and not under submission elsewhere. Once a year a list of co-operating reviewers is publish in electronic version of MPER.

All articles published in MPER are published in open access. In order to provide free access to readers, and to cover the costs of copyediting, typesetting, long-term archiving, and journal management, an article processing charge (APC) of 800 PLN (about 180 Euro, VAT included) for 10-page article applies to papers accepted after peer review. Each additional page of the article (over 10 pages) costs 80 PLN (about 18 Euro, VAT included). Maximum length of the article is 18 pages (using MPER template). There is no submission charge.

The average time during which the preliminary assessment of manuscripts is conducted - 14 days

The average time during which the reviews of manuscripts are conducted - 6 months

The average time in which the article is published - 12 months

The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on https://creativecommons.org/licenses/by/4.0/.

The ethics statements for the journal Management and Production Engineering Review are based on the guidelines of Committee on publication ethics (COPE) and the ELSEVIER publishing ethics resource kit.
For Authors: All articles, published in the journal Management and Production Engineering Review have to comprise a list of references which correspond with the journal’s Instructions to authors for paper preparation. The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted. All articles are tested using antyplagiarism programme. An author should not in general publish manuscripts describing essentially the same research in more than one journal or primary publication. Submitting the same manuscript to more than one journal concurrently constitutes unethical publishing behaviour and is unacceptable. Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study. The corresponding author should ensure that all co-authors have seen and approved the final version of the paper and have agreed to its submission for publication. All authors should disclose in their manuscript any financial or other substantive conflict of interest that might be construed to influence the results or interpretation of their manuscript. All sources of financial support for the project should be disclosed.
For Editor-in-Chief: The editor is responsible for decision which of the articles submitted to the journal should be published. The editor and editorial board and office must not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, potential reviewers, other editorial advisers, and the publisher, as appropriate. Unpublished materials disclosed in a submitted manuscript must not be used in an editor's own research without the express written consent of the author.
For Reviewers: Peer review helps the editor in making editorial decisions and also assist the author in improving the paper. Any selected referee who feels unqualified to review the research reported in a manuscript or knows that its prompt review will be impossible should notify the editor and excuse himself from the review process. Any manuscripts received for review must be treated as confidential documents. They must not be shown to or discussed with others except as authorized by the editor. Reviews should be conducted objectively. Personal criticism of the author is inappropriate. Reviewers should identify relevant published work that has not been cited by the authors. Any statement that an observation, derivation, or argument had been previously reported should be accompanied by the relevant citation. A reviewer should also call to the editor's attention any substantial similarity or overlap between the manuscript under consideration and any other published paper of which they have personal knowledge. Information obtained through peer review must be kept confidential and not used for personal advantage. Reviewers should not consider manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the papers. Other sources: http://apem-journal.org/

Received manuscripts are first examined by the Management and Production Engineering Review Editors. Manuscripts clearly not suitable for publication, incomplete or not prepared in the required style will be sent back to the authors without scientific review, but may be resubmitted as soon as they have been corrected. The corresponding author will be notified by e-mail when the manuscript is registered at the Editorial Office (office@mper.org). The ultimate decision to accept, accept subject to correction, or reject a manuscript lies within the prerogative of the Editor-in-Chief and is not subject to appeal. The editors are not obligated to justify their decision. All manuscripts submitted to MPER editorial office (e-mail: office@mper.org) will be sent to at least two and in some cases three reviewers for passing the double-blind review process. The responsible editor will make the decision either to send the manuscript to another reviewer to resolve the difference of opinion or return it to the authors for revision.

The average time during which the preliminary assessment of manuscripts is conducted - 14 days
The average time during which the reviews of manuscripts are conducted - 6 months
The average time in which the article is published - 8.4 months

Zahid Hussain Agha Sarhad University of Science and IT Peshawar Pakistan
Mehmet Ali Akinlar Yildiz Technical University Turkey
Zoran Anisic University of Novi Sad, Faculty of Technical Sciences Serbia
Katarzyna Antosz Rzeszow University of Technology Poland
Rajesh As Maharaja Institute of Technology Thandavapura India
Erfan Babaee Tirkolaee Mazandaran University of Science and Technology Iran
Zbigniew Banaszak Koszalin University of Technology Poland
Jolanta Baran Silesian University of Technology Poland
Mariusz Bednarek WSB Warszawa Poland
Srinivasa Murthy Boorla Grupo Antolin Spain
Oumaima Bounou FST-Fez Marocco
Robert Cep VSB-TU OSTRAVA Czech Republic
Fatih Çetin Niğde Ömer Halisdemir University Turkey
Claudiu Cicea Bucharest University of Economic Studies Romania
Pedro Cunha Instituto Politécnico de Setúbal Portugal
Szymon Cyfert Poznań University of Economics and Business Poland
Asta Daunorienė Assoc. prof., Kaunas University of Technology Lithuania
Ahmed Deif Associate Prof. California Polytechnic State University USA
Yuliia Denysenko Sumy State University Ukraine
Jacek Diakun Poznań University of Technology Poland
Ewa Dostatni Poznan University of Technology Poland
Joanna Duda AGH University of Science and Technology Poland
Milan Edl University of West Bohemia Czech Republic
Joanna Ejdys Bialystok University of Technology Poland
Nurprihatin Filscha Department of Industrial Engineering, Universitas Bunda Mulia Indonesia
Adi Fitra Magister Industrial Engineering ,Mercubuana University Indonesia
Mosè Gallo Department of Chemical, Materials and Industrial Production Engineering, University of Napoli Federico II Italy
Józef Gawlik Cracow Univesity of Technology Poland
Andrzej Gessner Poznan University of Technology Poland
Arkadiusz Gola Lublin University of Technology, Poland Poland
Alireza Goli Department of industrial engineering, Yazd university, Yazd, Iran Iran
Błażej Góralski Poznan University of Technology Chair of Production Engineering Poland
Pop Grigore Marian Technical university of Cluj-Napoca Romania
Łukasz Grudzień Poznan University of Technology Poland
Vitalii Ivanov Sumy State University Ukraine
Małgorzata Jasiulewicz-Kaczmarek Poznan University of Technology Poland
Jozef Jurko Technical University in Košice Poland
Oksana Karpenko RUDN University Russia
Anna Karwasz Poznan University of Technology Poland
Sławomir Klos University of Zielona Góra, Institute of Mechanical Engineering Poland
Remigiusz Kozlowski University of Lodz Poland
Stanisław Krzyżaniak Poznań School of Logistics Poland
Anna Lewandowska-Ciszek State University of Applied Sciences in Konin Poland
Jerzy Lewandowski Warsaw University of Technology Poland
Anna Lis Gdańsk University of Technology Poland
Reza Lotfi Department of industrial engineering Yazd University Iran
Sylwia Łęgowik-Świącik Czestochowa University of Technology Poland
Iulian Malcoci PhD, Associate Professor / Mechanical Engineering Moldova
Damjan Maletic University of Maribor, Faculty of Organizational Sciences Slovenia
Paweł Mielcarek Poznań University of Economics and Business Poland
Anna Nagyova Technical University of Kosice Slovakia
Andrei Stefan Nestian Alexandru Ioan Cuza University Iasi, Romania Romania
Filip Osiński Poznan University of Technology Poland
Ivan Pavlenko Sumy State University Ukraine
Dragan Peraković University of Zagreb, Faculty of transport and traffic sciences Croatia
Niles Perera University of Moratuwa Sri Lanka
Jan Pitel Technical University of Kosice, Faculty of Manufacturing Technologies, Slovakia Slovakia
Paulina Rewers Poznan University od Technology Poland
Piotr Rogala Uniwersytet Ekonomiczny we Wrocłąwiu Poland
Izabela Rojek Kazimierz WIelki University Poland
Łukasz Rymaniak Poznan University of Technology Poland
Krzysztof Santarek Politechnika Warszawska Poland
Michał Sąsiadek Uniwersytet Zielonogórski Poland
Shah Rukh Shakeel University of Vaasa Finland Finland
Parveen Sharma Lovely Professional University Phagwara India
Dorota Stadnicka Rzeszow University of Technology Poland
Binod Timilsina University of Vaasa Finland
Justyna Trojanowska Poznan University of Technology Poland
Stefan Trzcielinski Poznan University of Technology, Faculty of Engineering Management Poland
Mariusz Uchroński Wroclaw University of Science and Technology Poland
Nicolae Stelian Ungureanu Technical University of Cluj-Napoca , Romania Romania
Wiesław Urban Politechnika Białostocka Poland
Wiesław Urban Bialystok University of Technology Poland
Gerhard-Wilhelm Weber FEM, PUT Poland
Ewa Więcek-Janka PUT Poland
Marek Wirkus Politechnika Gdańska, Wydział Zarządzenia i Ekonomii Poland
Rika Yunitarini Trunojoyo University Indonesia Indonesia
Jozef Zajac TU Kosice Slovakia
Paweł Zmarzły Kielce University of Technology Poland
Krzysztof Żywicki Poznan University of Technology Poland