Management and Production Engineering Review

All manuscripts should be submitted at:

https://www.editorialsystem.com/mper/

They are first examined by the Management and Production Engineering Review Editors. Manuscripts clearly not suitable for publication, incomplete or not prepared in the required style will be sent back to the authors without scientific review, but may be resubmitted as soon as they have been corrected. The ultimate decision to accept, accept subject to correction, or reject a manuscript lies within the prerogative of the Editor-in-Chief and is not subject to appeal. The editors are not obligated to justify their decision.

All manuscripts submitted to MPER at https://www.editorialsystem.com/mper/ will be sent to at least two and in some cases three reviewers for passing the double-blind review process. The responsible editor will make the decision either to send the manuscript to another reviewer to resolve the difference of opinion or return it to the authors for revision.

The material formatted in the MPER format must be unpublished and not under submission elsewhere. Once a year a list of co-operating reviewers is publish in electronic version of MPER.

All articles published in MPER are published in open access. In order to provide free access to readers, and to cover the costs of copyediting, typesetting, long-term archiving, and journal management, an article processing charge (APC) of 800 PLN (about 180 Euro, VAT included) for 10-page article applies to papers accepted after peer review. Each additional page of the article (over 10 pages) costs 80 PLN (about 18 Euro, VAT included). Maximum length of the article is 18 pages (using MPER template). There is no submission charge.

The average time during which the preliminary assessment of manuscripts is conducted - 14 days

The average time during which the reviews of manuscripts are conducted - 6 months

The average time in which the article is published - 12 months

The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on https://creativecommons.org/licenses/by/4.0/.

The ethics statements for the journal Management and Production Engineering Review are based on the guidelines of Committee on publication ethics (COPE) and the ELSEVIER publishing ethics resource kit.
For Authors: All articles, published in the journal Management and Production Engineering Review have to comprise a list of references which correspond with the journal’s Instructions to authors for paper preparation. The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted. All articles are tested using antyplagiarism programme. An author should not in general publish manuscripts describing essentially the same research in more than one journal or primary publication. Submitting the same manuscript to more than one journal concurrently constitutes unethical publishing behaviour and is unacceptable. Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study. The corresponding author should ensure that all co-authors have seen and approved the final version of the paper and have agreed to its submission for publication. All authors should disclose in their manuscript any financial or other substantive conflict of interest that might be construed to influence the results or interpretation of their manuscript. All sources of financial support for the project should be disclosed.
For Editor-in-Chief: The editor is responsible for decision which of the articles submitted to the journal should be published. The editor and editorial board and office must not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, potential reviewers, other editorial advisers, and the publisher, as appropriate. Unpublished materials disclosed in a submitted manuscript must not be used in an editor's own research without the express written consent of the author.
For Reviewers: Peer review helps the editor in making editorial decisions and also assist the author in improving the paper. Any selected referee who feels unqualified to review the research reported in a manuscript or knows that its prompt review will be impossible should notify the editor and excuse himself from the review process. Any manuscripts received for review must be treated as confidential documents. They must not be shown to or discussed with others except as authorized by the editor. Reviews should be conducted objectively. Personal criticism of the author is inappropriate. Reviewers should identify relevant published work that has not been cited by the authors. Any statement that an observation, derivation, or argument had been previously reported should be accompanied by the relevant citation. A reviewer should also call to the editor's attention any substantial similarity or overlap between the manuscript under consideration and any other published paper of which they have personal knowledge. Information obtained through peer review must be kept confidential and not used for personal advantage. Reviewers should not consider manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the papers. Other sources: http://apem-journal.org/

Received manuscripts are first examined by the Management and Production Engineering Review Editors. Manuscripts clearly not suitable for publication, incomplete or not prepared in the required style will be sent back to the authors without scientific review, but may be resubmitted as soon as they have been corrected. The corresponding author will be notified by e-mail when the manuscript is registered at the Editorial Office (marta.grabowska@put.poznan.pl; mper@put.poznan.pl). The ultimate decision to accept, accept subject to correction, or reject a manuscript lies within the prerogative of the Editor-in-Chief and is not subject to appeal. The editors are not obligated to justify their decision. All manuscripts submitted to MPER editorial office (https://www.editorialsystem.com/mper/) will be sent to at least two and in some cases three reviewers for passing the double-blind review process. The responsible editor will make the decision either to send the manuscript to another reviewer to resolve the difference of opinion or return it to the authors for revision.

The average time during which the preliminary assessment of manuscripts is conducted - 14 days
The average time during which the reviews of manuscripts are conducted - 6 months
The average time in which the article is published - 8.4 months

Degree Name Surname Affiliation Dr. Hind Ali University of Technology, Iraq Prof. Katarzyna Antosz Rzeszow University of Technology, Poland Dr. Bagus Arthaya Mechatronics Engineering Universitas Parahyangan, Indonesia Dr. Sarini Azizan Australian National University, Australia Prof. Zbiegniew Banaszak Koszalin University of Technology, Poland Prof. Lucia Bednarova Technical University of Kosice, Slovak Republic Prof. Kamila Borsekova UNIVERZITA MATEJA BELA V BANSKEJ BYSTRICI, Slovak Republic Prof. Rachid Boutarfa Hassan First University, Morocco Prof. Anna Burduk Wrocław University of Science and Technology, Poland Dr. Virginia Casey Universidad Nacional de Rosario, Argentina Claudiu Cicea Bucharest University of Economic Studies Romania, Romania Prof. Ömer Cora Karadeniz Technical University, Turkey Prof. Wiesław Danielak Uniwersytet Zielonogórski, Poland Dr. Jacek Diakun Poznan University of Technology, Poland Dr. Ewa Dostatni Poznan University of Technology, Poland Prof. Marek Dźwiarek Central Institute for Labor Protection Dr. Milan Edl University of West Bohemia, Czech Republic Joanna Ejdys Bialystok University of Technology, Poland Prof. Abdellah El barkany Sidi Mohamed Ben Abdellah University, Morocco Francesco Facchini Università degli Studi di Bari, Italy Prof. Mária Magdolna Farkasné Fekete Szent István University, Hungary Prof. Çetin Fatih Başkent Üniversitesi, Turkey Mose Gallo University of Napoli Federico, Italy Dr. Mit Gandhi Gujarat Gas Limited, India Prof. Józef Gawlik Cracow University of Technology, Poland Dr. Andrzej Gessner Poznan University of Technology, Poland Dr. Pedro Glass Universitatea Valahia din Targoviste, Romania Dr. Arkadiusz Gola Lublin University of Technology, Poland Alireza Goli Yazd university, Iran Dr. Magdalena Graczyk-Kucharska Poznan University of Technology, Poland Dr. Damian Grajewski Poznan University of Technology, Poland Dr. Łukasz Grudzień Poznan University of Technology, Poland Patrik Grznár University of Žilina, Slovak Republic Dr. Anouar Hallioui Sidi Mohamed Ben Abdellah University, Morocco Prof. Ali Hamidoglu Turkey Prof. Adam Hamrol Poznan University of Technology, Poland Dr. ni luh putu hariastuti itats, Indonesia Dr. Christian Harito Bina Nusantara University, Indonesia Dr. Muatazz Hazza School of Engineering, United Arab Emirates Dr. Ali Jaboob Dhofar University, Oman Prof. Małgorzata Jasiulewicz-Kaczmarek Poznan University of Technology, Poland Prof. Oláh Judit University of Debrecen, Hungary Prof. Jan Klimek Szkoła Główna Handlowa, Poland Dr. Nataliia Klymenko National University of Life and Environmental Sciences of Ukraine Prof. Sławomir Kłos University of Zielona Góra, Poland Dr. Peter Kostal Slovenská Technická Univerzita V Bratislave, Slovak Republic Prof. Martin Krajčovič University of Žilina, Slovak Republic Prof. Robert Kucęba Politechnika Częstochowska, Poland Dr. Agnieszka Kujawińska Poznan University of Technology, Poland Dr. Edyta Kulej-Dudek Politechnika Częstochowska, Poland Prof. Christian Landschützer Graz University of Technology, Austria Dr. Anna Lewandowska-Ciszek Poznan University of Economics and Business, Poland Dr. Damjan Maletič University of Maribor, Slovenia Prof. Marcela Malindzakova Technical University, Slovak Republic Prof. Józef Matuszek The Silesian Technical University Prof. Janusz Mleczko University of Bielsko-Biala Dr. Rami Mokao MIS - Management Information Systems, HIAST, Syria Prof. Maria Elena Nenni University of Naples, Italy Dr. Nor Hasrul Akhmal Ngadiman Universiti Teknologi Malaysia, Malaysia Dr. Dinh Son Nguyen University of Science and Technology, Viet Nam Dr. Duc Duy Nguyen Ho Chi Minh Technology University (HCMUT), Viet Nam Dr. Filscha Nurprihatin Sampoerna University, Indonesia Prof. ass. Filip Osiński Poznan University of Technology, Poland Dr. Ivan Pavlenko Sumy State University, Ukraine Robert Perkin BorgWarner, United States Prof. Alin Pop University of Oradea, Romania Prof. Ravipudi Venkata Rao National Institute of Technology, India Marta Rinaldi University of Campania, Italy Dr. Michał Rogalewicz Poznan University of Technology, Poland Prof. David Romero Tecnológico de Monterrey, Mexico Prof. Elmadani Saad Hassan First university of Settat, Morocco Prof. Krzysztof Santarek Warsaw University of Technology, Poland Prof. shankar sehgal Panjab University Chandigarh, India Dr. Robert Sika Poznan University of Technology, Poland Dr. Chansiri Singhtaun Kasetsart University, Thailand Prof. Bożena Skołud Silesian University of Technology, Poland Lucjan Sobiesław Jagiellonian University, Poland Dr. Fabiana Tornese University of Salento, Italy Prof. Stefan Trzcielinski Poznan University of Technology, Poland Amit Kumar Tyagi Centre for Advanced Data Science, India Dr. Cang Vo Binh Duong University, Viet Nam Dr. Jaroslav Vrchota University of South Bohemia České Budějovice, Czech Republic Dr. Radosław Wichniarek Poznan University of Technology, Poland Prof. Ewa Więcek-Janka Poznan University of Technology, Poland Prof. Josef Zajac Uniwersytet Techniczny w Koszycach, Slovak Republic Dr. Aurora Zen Universidade Federal do Rio Grande do Sul, Brazil