Applied sciences

Bulletin of the Polish Academy of Sciences: Technical Sciences

Content

Bulletin of the Polish Academy of Sciences: Technical Sciences | 2008 | vol. 56 | No 4 |

Abstract

Spectral properties of nonnegative and Metzler matrices are considered. The conditions for existence of Metzler spectrum in dynamical systems have been established. An electric RL and GC ladder-network is presented as an example of dynamical Metzler system. The suitable conditions for parameters of these electrical networks are formulated. Numerical calculations were done in MATLAB.

Go to article

Abstract

A new concept (notion) of the practical stability of positive fractional discrete-time linear systems is introduced. Necessary and sufficient conditions for the practical stability of the positive fractional systems are established. It is shown that the positive fractional systems are practically unstable if corresponding standard positive fractional systems are asymptotically unstable.

Go to article

Abstract

New frequency domain methods for stability analysis of linear continuous-time fractional order systems with delays of the retarded type are given. The methods are obtained by generalisation to the class of fractional order systems with delays of the Mikhailov stability criterion and the modified Mikhailov stability criterion known from the theory of natural order systems without and with delays. The study is illustrated by numerical examples of time-delay systems of commensurate and non-commensurate fractional orders.

Go to article

Abstract

Simple new necessary and sufficient conditions for asymptotic stability of the positive linear discrete-time systems with delays in states are established. It is shown that asymptotic stability of the system is equivalent to asymptotic stability of the corresponding positive discrete-time system without delays of the same size. The considerations are illustrated by numerical examples.

Go to article

Abstract

The paper presents the stability problem of control systems composed of a fractional-order PI controller and a inertial plant of a fractional order with time delay. Simple and efficient computational method for determining stability regions in the controller and plant parameters space is given. Knowledge of these regions permits tuning of the fractional-order PI controller. The method proposed is based on the classical D-partition method.

Go to article

Abstract

In the present paper finite-dimensional dynamical control systems described by semilinear ordinary differential state equations with multiple point delays in control are considered. It is generally assumed, that the values of admissible controls are in a convex and closed cone with vertex at zero. Using so-called generalized open mapping theorem, sufficient conditions for constrained local relative controllability near the origin are formulated and proved. Roughly speaking, it will be proved that under suitable assumptions constrained global relative controllability of a linear associated approximated dynamical system implies constrained local relative controllability near the origin of the original semilinear dynamical system. This is generalization to the constrained controllability case some previous results concerning controllability of linear dynamical systems with multiple point delays in the control and with unconstrained controls. Moreover, necessary and sufficient conditions for constrained global relative controllability of an associated linear dynamical system with multiple point delays in control are discussed. Simple numerical example, which illustrates theoretical considerations is also given. Finally, some remarks and comments on the existing results for controllability of nonlinear dynamical systems are also presented.

Go to article

Abstract

In the paper the parallel compensator considered in [1] is applied to control of the plants with delay and compared with Smith predictor. It is noted that Smith predictor removes only the delay, while the parallel compensator also changes the dynamics of the replacement plant; the latter may be in some degree of freedom shaped by the designer. Owing to this the transients of the system with parallel compensator are significantly faster. Accounting implementability, the control saturations are introduced in control algorithms. Additionally it is shown that using parallel compensator we may apply a relay control to the plants with delay and nonminimum phase zeros, which is impossible by using Smith predictor. Several results of simulations are described which confirm these observations.

Go to article

Abstract

Together with the dynamic development of modern computer systems, the possibilities of applying refined methods of nonparametric estimation to control engineering tasks have grown just as fast. This broad and complex theme is presented in this paper for the case of estimation of density of a random variable distribution. Nonparametric methods allow here the useful characterization of probability distributions without arbitrary assumptions regarding their membership to a fixed class. Following an illustratory description of the fundamental procedures used to this end, results will be generalized and synthetically presented of research on the application of kernel estimators, dominant here, in problems of Bayes parameter estimation with asymmetrical polynomial loss function, as well as for fault detection in dynamical systems as objects of automatic control, in the scope of detection, diagnosis and prognosis of malfunctions. To this aim the basics of data analysis and exploration tasks - recognition of outliers, clustering and classification - solved using uniform mathematical apparatus based on the kernel estimators methodology were also investigated

Go to article

Abstract

The paper considers a digital design of time-invariant systems in the case of step-invariant (ZOH), bilinear (Tustin's) and fractional order hold (FROH) discretization methods. The design problem is formulated as linear matrix inequalities (LMI). A closed-loop stability of the digitally designed control systems is discussed.

Go to article

Abstract

This paper presents a brief survey of our research in which we have used control theoretic methods in modelling and control of cancer populations. We focus our attention on two classes of problems: optimization of anticancer chemotherapy taking into account both phase specificity and drug resistance, and modelling, and optimization of antiangiogenic therapy. In the case of chemotherapy the control action is directly aimed against the cancer cells while in the case of antiangiogenic therapy it is directed against normal cells building blood vessels and only indirectly it controls cancer growth. We discuss models (both finite and infinite dimensional) which are used to find conditions for tumour eradication and to optimize chemotherapy protocols treating cell cycle as an object of control. In the case of antiangiogenic therapy we follow the line of reasoning presented by Hahnfeldt et al. who proposed to use classical models of self-limiting tumour growth with variable carrying capacity defined by the dynamics of the vascular network induced by the tumour in the process of angiogenesis. In this case antiangiogenic protocols are understood as control strategies and their optimization leads to new recommendations for anticancer therapy.

Go to article

Abstract

This article describes queueing systems and queueing networks which are successfully used for performance analysis of different systems such as computer, communications, transportation networks and manufacturing. It incorporates classical Markovian systems with exponential service times and a Poisson arrival process, and queueing systems with individual service. Oscillating queueing systems and queueing systems with Cox and Weibull service time distribution as examples of non-Markovian systems are studied. Jackson's, Kelly's and BCMP networks are also briefly characterized. The model of Fork-Join systems applied to parallel processing analysis and the FES approximation making possible of Fork-Join analysis is also presented. Various types of blocking representing the systems with limited resources are briefly described. In addition, examples of queueing theory applications are given. The application of closed BCMP networks in the health care area and performance evaluation of the information system is presented. In recent years the application of queueing systems and queueing networks to modelling of human performance arouses researchers' interest. Hence, in this paper an architecture called the Queueing Network-Model Human Processor is presented.

Go to article

Abstract

This paper gives the simple algorithm for calculation of the degree and coefficients of the minimal polynomial for the complex matrix A = [aij]n x n .

Go to article

Abstract

Embedded software and dedicated hardware are vital elements of the modern world, from personal electronics to transportation, from communication to aerospace, from military to gaming, from medical systems to banking. Combinations of even minor hardware or software defects in a complex system may lead to violation of safety with or even without evident system failure. a major problem that the computing profession faces is the lack of a universal approach to unite the dissimilar viewpoints presented by computer science, with its discrete and mathematical underpinnings, and by computer engineering, which focuses on building real systems and considering spatial and material constraints of space, energy, and time. Modern embedded systems include both viewpoints: microprocessors running software and programmable electronic hardware created with an extensive use of software. The gap between science and engineering approaches is clearly visible in engineering education. This survey paper focuses on exploring the commonalities between building software and building hardware in an attempt to establish a new framework for rejuvenating computing education, specifically software engineering for dependable systems. We present here a perspective on software/hardware relationship, aviation system certification, role of software engineering education, and future directions in computing.

Go to article

Abstract

Information Technologies (IT) are most and most important factor in economical and social development of particular countries and of the whole world, therefore we often think and told about so called Information Society (IS) as a new form of socio-economical organization of the society. Most properties of IT are profitable for the people and most features of IS are positive. Nevertheless we can find also some problems arising because of too fast development of IT and some dangers connected with increasing dependability of present society on IT devices and services. In the paper selected problems connected with distance teaching and distance learning (so called elearning) are pointed out and considered. As a most important problem so called "information smog" is pointed. It is very troublesome at present and may be source of big problem in the future.

Go to article

Editorial office

Editor-in-Chief:

T. Kaczorek, Warsaw University of Technology

Deputy Editor-in Chief:

M. Kaźmierkowski, Warsaw University of Technology

A. Rogalski, Division IV Technical Sciences PAN

Board of Co-editors:

Artificial and Computational Intelligence

S. Osowski and B. Sawicki, Warsaw University of Technology

Biomedical Engineering and Biotechnology

A. Liebert and R. Maniewski, Institute of Biocybernetics and Biomedical Engineering PAN

Civil Engineering

L. Czarnecki, Building Research Institute, ITB, Warsaw

Control, Robotics and Informatics

J. Klamka and A. Babiarz, Silesian Technical University

A. Borkowski, Institute of Fundamental Technological Research PAN

Electronics, Telecommunication and Optoelectronics

M. Mrozowski and A. Lamęcki, Gdansk University of Technology

W. Woliński, Warsaw University of Technology

Mechanical and Aeronautical Engineering, Thermodynamics

A. Styczek and A. Tylikowski, Warsaw University of Technology

Materials Science and Nanotechnology

B. Major and P. Czaja, Institute of Metallurgy and Materials Science PAN

T.A. Kowalewski and B. Blachowski, Institute of Fundamental Technological Research PAN

Power Systems and Power Electronics

M.P. Kazmierkowski, Warsaw University of Technology

International Editorial Advisory Board

I.V. Alexandrov, Ufa State Aviation Technical University, Russia

R. Asthana, University of Wiscontin-Stout, Menomonie, USA

Xu Binshi, China Association of Plant Engineering, Beijing, P.R. China

F. Blaabjerg, Aalborg University, Denmark

C. Cecati, University of L’Aquila, Italy

A. Cichocki, RIKEN Institute, Tokyo, Japan

M. David, National Polytechnique de Toulouse, France

R. Ebner, Materials Centre Leoben, Leoben, Austria

E. Fornasini, University of Padova, Padova, Italy

L.G. Franquelo, University of Sevilla, Spain

M. Gad-el-Hak, Virginia Commonwealth University, Richmond, USA

D. van Gemert, Catholic University Leuven, KU Leuven, Belgium

L. Keviczky, Hungarian Academy of Sciences, Budapest, Hungary

V. Kučera, Czech Technical University in Prague, Prague, Czech Republic

R. Kennel, Technical University Munich, Germany

E. Levi, Liverpool John Moore University, UK

G. Maier, Technical University of Milan, Milan, Italy

K.F. Man, City University of Hong Kong,

H.A. Mang, Austrian Academy of Sciences, Vienna, Austria

H. Mihashi, Tohoku University, Aoba-ku, Sendai, Japan

S. Mindess, University of British Columbia, Vancouver, Canada

D.A. Mlynski, University of Karlsruhe, Karlsruhe, Germany

A.S. Nowak, University of Michigan, Ann Arbor, USA

K. Ohnishi, Keio University, Yokohama, Japan

A. Öberg, Linköping University, Linköping, Sweden

W. Pedrycz, University of Alberta, Canada

S. Przemieniecki, University of South Florida, Tampa, USA

M. Razeghi, Northwestern University, Evanston, USA

J. Rodriguez, Technical University of Federico Santa Maria, Valparaiso, Chile

J.V. Sloten, Catholic University Leuven, Leuven, Belgium

B.M. Wilamowski, University of Auburn, Alabama, USA

W. Włosiński, Warsaw University of Technology, Warsaw, Poland

A.L. Yarin, Institute of Illinois at Chicago, USA

Du Xiangwan, Chinese Academy of Engineering, China

J. Żurada, Department of Computer Engineering, University of Louisville, USA

Contact

Editorial Office:

Pałac Kultury i Nauki

Wydział IV Nauk Technicznych PAN

Pl. Defilad 1

PL 00-901 Warszawa

Mrs Ewa Trojanowska

bulletinpas.et@gmail.com

Instructions for authors

Instructions for Authors

About the Journal

The Bulletin of the Polish Academy of Sciences: Technical Sciences (Bull. Pol. Ac.: Tech.) is published by the Division IV: Engineering Sciences of the Polish Academy of Sciences. The journal is peer‐reviewed and is published both in printed and electronic form (http://www.czasopisma.pan.pl/bpas). It is established for the publication of original high quality papers from multidisciplinary Engineering sciences with the following topics preferred:

• Artificial and Computational Intelligence,

• Biomedical Engineering and Biotechnology,

• Civil Engineering,

• Control, Informatics and Robotics,

• Electronics, Telecommunication and Optoelectronics,

• Mechanical and Aeronautical Engineering, Thermodynamics,

• Material Science and Nanotechnology,

• Power Systems and Power Electronics.

General data:

Format of the journal – A4 printed and electronic form,

Paper type – offset

Colourfulness – full colour at an extra charge,

The volume of the journal – 200 pages (ca 20 papers) + 4 cover pages,

Frequency of publication – bimonthly,

ISSN: 0239-7528 (print version),

ISSN: 2300-1917 (on line version),

DOI: 10.2478/bpasts

Abbreviations/Acronym:

Journal citation: Bull. Pol. Ac.: Tech.

ISO: Bull. Pol. Acad. Sci.-Tech. Sci.,

JCR Abbrev: B POL ACAD SCI-TECH

Acronym in the Editorial System: BPASTS

Journal Metrics:

JCR Impact Factor 2017: 1.361

5 Year Impact Factor 2017: 1.323

SCImago Journal Rank (SJR) 2015: 0.526

Source Normalized Impact per Paper (SNIP) 2015: 1.208

Impact per Publication (IPP) 2015: 1.158

The Polish Ministry of Science and Higher Education 2017: 25 points

Manuscript types:

Invited reviews presenting the state of the knowledge and/or devoted to novel topics,

• Refereed research papers reporting on original scientific or technological achievements,

• Refereed papers in special issues/sections serving as conference proceedings arranged by guest editors.

Special Section Policy

Proposals of original Special Sections within the scope of the Journal may be submitted to the Editorial Office. Special Section submission rules are described in detail at: Edytorial Systems

Guest Editor form needed for submitting a Special Section proposal: Edytorial systems

Manuscript Submission Policy

All manuscripts submitted for publication should be original. Manuscripts published or under consideration for publication elsewhere should not be submitted and will not be considered. Submission of a paper implies that it has not been published previously, that it is not under consideration for publication elsewhere, and that if accepted it will not be published elsewhere in the same form, in English or in any other language, without the written consent of the Publisher.

However, manuscripts based on papers published at related conferences and workshops proceedings may be submitted for consideration provided that: (1) the papers are not identical (similarity index must be below 50%), (2) the authors cite their earlier conference paper on which this new work is based, (3) the journal publication includes clearly shown novel elements (e.g., more comprehensive experiments).

Manuscript submission for review

The Bull. Pol. Ac.: Tech now employs a Web-based manuscript submission and peer-review tracking system called Editorial System. Authors must submit their manuscript electronically on the web: http://www.editorialsystem.com/bpasts/.

From this entry page, access can be obtained to all information required for the submission of a manuscript. First‐time users must create an Author’s account to obtain a user ID and password required to enter the system. All manuscripts receive individual identification codes that should be used in any correspondence with regard to the publication process. For the authors already registered in the Editorial System it is enough to enter their username and password to login as an author (Sign in).

Author(s) will be notified about registration and manuscript review process by e-mail.

The manuscripts must be uploaded as a single PDF file.

If you experience difficulties with the manuscript submission website, please contact the Copy Editor of the Bull. Pol. Ac.: Tech (Anna Jurkiewicz: bulletinPAS@gmail.com).Names of authors and their affiliation should be removed from the manuscripts for the review process in order to have a fair evaluation of their manuscript. All authors of the manuscript are responsible for its content; they must have agreed to its publication and have given the corresponding author the authority to act on their behalf in all matters pertaining to publication. The Corresponding Author is responsible for informing the coauthors of the manuscript status throughout the submission, review, and production process. All submitted papers are checked using iThenticate plagiarism detection software.

Manuscript preparation

1. The manuscript should be written in clear and concise English.

2. For manuscript preparation please use the attached Word or LaTeX template.

3. Please remember that in the .pdf version of the manuscript for evaluation process author(s) name(s) and affiliation should be removed.

4. Authors should consult a recent issue of the journal for style if possible.

Manuscript decision and Proofs

Manuscript evaluations are assigned one of four outcomes: Accept, Minor Revisions, Major Revisions, and Reject. Manuscripts with "Minor Revision" do not require a second review. All manuscripts receiving a "Major Revision" evaluation must be subjected to a second review. Rejected manuscripts are given no further consideration. Normally, manuscripts that receive a "Major Revision" decision have only one additional chance for revision and the revised version should be uploaded to the Editorial System within six weeks. If the author(s) failed to make satisfactory changes, the manuscript is rejected. On acceptance, manuscripts are subject to editorial amendment to suit house style.

Transfer of Copyright Agreement

Once the paper is initially accepted, the authors are assumed to have transferred the copyright of the paper to the publisher. Please fill the attached Form, sign, and add to the final version of the manuscript as separate .pdf file.

It is also available on the webpage

https://www.editorialsystem.com/files/bpasts/docs/BPASTS_License_to_publish.pdf.

Proofs will be sent to the author (first named author if no corresponding author is identified for multi-authored papers) and should be returned within 48 hours of receipt.

Fees for printing the article

The Bulletin of the Polish Academy of Sciences: Technical Sciences (Bull. Pol. Ac.: Tech.) is published in Open Access, which means that all papers are available on the internet to all users immediately upon publication free of charge for the readers. By submitting a paper for publication, authors declare that they are ready to cover the costs of printing their paper. In exchange for a fee for printing, the PDF file of published paper is available at the Open Access platform: http://www.degruyter.com/view/j/bpasts

National (foreign) authors:

• The flat fee of 1230 PLN (approximately 300 EUR) per paper

Exempt from the fee are:

• Authors of articles ordered by the Editorial Board (Invited papers)

50% discount for:

• Reviewers (who performed at least 5 reviews per year) – one paper per year

• Guest Editors (the discount is valid only within the special section guest-edited by the author)

Mandatory over-length charges of 200 PLN (approximately 50 EUR) per page

in case the paper exceeds

• 8 printed double-column pages for regular research papers,

• 8 printed double-column pages for Special issue/section papers,

• No limit for invited (review) papers.

In addition, each color page will be charged an additional fee according to the current cost of printing. Otherwise, the paper will be printed in black-white.

Information needed for Proforma Invoice

1. Author’s/Authors’ Last name(s), Name(s), e-mail

2. Title of the paper

3. Exact name of the payer (person / institution or other legal entity realizing the transfer)

4. Address of the payer

5. Taxpayer Identification Number (TIN, in Polish NIP) – only when paid by an institution or another legal entity!

Check list for final submission to the Bull. Pol. Ac.: Tech (after review)

1. Is your manuscript up to date? Did you include references, which were published while your manuscript was being processed? It is expected that at least 20% of references are to journal papers published in the last two years. Authors are welcome to consider reference papers published in the Bull. Pol. Ac.: Tech. In order to find the recent Bull. Pol. Ac.: Tech. papers please visit Open Access platform: http://www.czasopisma.pan.pl/dlibra/journal/95347

2. Is your title adequate and is your abstract correctly written? In the age of electronic publications it is not easy to be noticed! Authors have to do everything possible so the paper will be seen and read. Therefore, very careful wording should be used in the title and in the abstract. Without a proper and interesting title and abstract a great paper might never be downloaded from the de Gruyter platform http://www.czasopisma.pan.pl/dlibra/journal/95347 and read.

3. Does the manuscript clearly describe problem(s) and your accomplishments? Can your manuscript be shortened? Are there sentences or paragraphs that do not provide important information and can be eliminated?

4. Is the length of your manuscript adequate? Please notice that for long papers, you may face mandatory over length charges per page.

5. Please make sure that the fee for printing your manuscript is paid.

Open Access policy

Bulletin of the Polish Academy of Sciences: Technical Sciences jest czasopismem wydawanym w wolnym dostępie na licencji CC BY-NC-ND 4.0.

Bulletin of the Polish Academy of Sciences: Technical Sciences is an open access journal with all content available with no charge in full text version. The journal content is available under the licencse CC BY-NC-ND 4.0.

This page uses 'cookies'. Learn more